marlin

Graphique des révisions

Auteur	SHA1	Message	Date
Phil Hord	09469add55	Add board reset reporting (from Repetier-Firmware)	il y a 13 ans
Phil Hord	f3101e96d9	Add suitable .gitignore to avoid build noise	il y a 13 ans
Phil Hord	245dca4bee	Makefile: generic pde=>cpp rule This adds flexibility to the makefile by allowing different pde targets to be specified for different needs.	il y a 13 ans
Erik van der Zalm	97d42ca2b2	SDSUPPORT default disabled	il y a 13 ans
ErikZalm	2faa0852b9	Merge pull request #79 from changwoo/Marlin_v1 Fix build on Sanguino based boards with ATmega1284P	il y a 13 ans
Changwoo Ryu	7b14953c99	Fix build on Sanguino based boards with ATmega1284P	il y a 13 ans
Daid	286d5003fa	Fixed compiler warning for Sanguino compile	il y a 13 ans
ErikZalm	66d50562b6	Merge pull request #76 from iXce/Marlin_v1 Fix Makefile	il y a 13 ans
Erik van der Zalm	27f595a444	Changed version => RC2	il y a 13 ans
Erik van der Zalm	018c567abf	Moved SLOWDOWN function. (jetty840) Included AD595 calibration options. (daid)	il y a 13 ans
Erik van der Zalm	4fbda5c3f5	Merge remote-tracking branch 'daid/Marlin_v1' into Test	il y a 13 ans
Erik van der Zalm	ce714fe306	Fixes in pins.h	il y a 13 ans
Erik van der Zalm	35e57bf149	Added gen6 deluxe.	il y a 13 ans
Erik van der Zalm	84ea2d61e8	Moved gen7 boards to motherboard type 10, 11 and 12. Split ramps1.3 in Sprinter like config and multiextruder config.	il y a 13 ans
Guillaume Seguin	adc108d79e	Correctly build the produced applet/Marlin.cpp source	il y a 13 ans
Erik van der Zalm	5aa9c41ab1	Changed comment mode for detection. Added M221 extuder multiply factor.	il y a 13 ans
Erik van der Zalm	00690f7ffd	Fix cast warning in Gen7	il y a 13 ans
Erik van der Zalm	01d28c18ab	Fixed casting warning in sanguino	il y a 13 ans
Blair Thompson	2fd8c248fe	Added Fan control to the pre-heat settings. I find that the PID routine works better when the cooling fan is switched on at the beginning of a warm up routine. Otherwise when you enable the fan just before a print, you have a delay as the PIDre-adjusts. This should also be safer as most cooling fans are directed at the hot -ends thermal barrier!	il y a 13 ans
Blair Thompson	d9f2f509d5	Added new menu items under the prepare submenu. Instead of a single pre-heat, now there is pre-heat ABS and PLA options Added defines to the configuration file to adjust preheat temperatures for both	il y a 13 ans
Erik van der Zalm	ae3e7586c6	Added HOME_POS. This adds the posibility to make the center 0 Updated the Xsteps ... settings via the LCD menu	il y a 13 ans
Erik van der Zalm	df1437bd86	Changed display format for some numbers.	il y a 13 ans
Erik van der Zalm	8816ef1c64	Small fixes after merge	il y a 13 ans
Erik van der Zalm	d298dd121f	merged SBUBA82 and Justblair	il y a 13 ans
Erik van der Zalm	2cc9a89830	Merge remote-tracking branch 'SCUBA82/Marlin_v1' into Marlin_v1	il y a 13 ans
Erik van der Zalm	a0a1f81913	various changes	il y a 13 ans
Christian Thalhammer	8a8ea50f33	fixed manual axis movement lcd option	il y a 13 ans
Blair Thompson	b976692d0f	Removed VS project files for tidyness stakes	il y a 13 ans
Blair Thompson	fe940a142d	Added a structure that will allow easy translations/modifications to the LCD menu. Signed-off-by: Blair Thompson <mail@justblair.co.uk>	il y a 13 ans
Christian Thalhammer	b3fb09a20c	change preheat to ABS values of nozzle 227 and be 105 �C next try for manual axis movement	il y a 13 ans
Christian Thalhammer	6a3f8cf23f	Infos about fuses to use; correct fuses in boards.txt	il y a 13 ans
Blair Thompson	a05a261b72	Added a workaround. Ramps SD card does not have sdcarddetect. My temporary solution is to add a momentary swtich that pulls down the SDCARDDETECT pin and mimicking the pull and reinsert ofa a SD card	il y a 13 ans
Blair Thompson	1b6765ed12	Updated the pin config for RAMPS 1.3 to include ultimaker new style LCD/Rotary Encoder interface	il y a 13 ans
Christian Thalhammer	1ff99ae25f	ATMega1284P support for Arduino IDE replace $ARDUINO_HOME/hardware/tools/avr/etc/arduino.conf with this file	il y a 13 ans
Christian Thalhammer	234fe8ea67	added infos for this fork	il y a 13 ans
Christian Thalhammer	e661578c84	support for GEN7 1.1,1.2 and 1.3	il y a 13 ans
Daid	73344e69c1	Added temperature offset/gain settings for AD595.	il y a 13 ans
Christian Thalhammer	d309565b56	Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1 Conflicts: Marlin/Configuration.h	il y a 13 ans
daid	3f20f37c78	Merge remote branch 'upstream/Marlin_v1' into Marlin_v1	il y a 13 ans
Christian Thalhammer	0e3631ff4b	smaller changes	il y a 13 ans
Erik van der Zalm	fa2e1be0ca	changed default EXTRUDE_MINTEMP to 170.	il y a 13 ans
Erik van der Zalm	7699f250e3	Fixed small merge bug	il y a 13 ans
Erik van der Zalm	11518a987f	merged with triffid fork	il y a 13 ans
Erik van der Zalm	b447815de5	removed unused HEATING_EARLY_FINISH_DEG_OFFSET Simplified stepper inactive time	il y a 13 ans
Erik van der Zalm	bde30b2b48	Corrected e-length calculation in planner	il y a 13 ans
Erik van der Zalm	13e185d330	removed unused HEATING_EARLY_FINISH_DEG_OFFSET Simplified stepper inactive time	il y a 13 ans
Erik van der Zalm	b58eae7657	Corrected e-length calculation in planner	il y a 13 ans
ErikZalm	3e7fcb813e	Merge pull request #61 from daid/Marlin_v1 Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.	il y a 13 ans
daid	2a77c84c8f	Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.	il y a 13 ans
Erik van der Zalm	d47a3e5950	Changed check i mtion_conrol if (millimeters_of_travel == 0.0) => if (millimeters_of_travel < 0.001) (thanks mooselake)	il y a 13 ans