marlin

Commit Graph

Автор	SHA1	Съобщение	Дата
Tim Koster	97b0da0c2e	Removed #ifndef BLINKM	преди 12 години
Tim Koster	61db046b32	Added #ifdef BLINKM around new code. Also refined BlinkM.h.	преди 12 години
Richard Miles	77df2ab0e7	Make Y_DUAL_STEPPER_DRIVERS disabled by default	преди 12 години
Richard Miles	ed1ab42186	Added Y_DUAL_STEPPER_DRIVERS Enables two stepper drivers to be used for the Y axis (useful for Shapeoko style machines) Each Y driver can be stepped in either the same way or in opposite directions, accounting for different hardware setups (leadscrew vs. belt driven)	преди 12 години
Richard Miles	f4a59e4ce5	Revert "Added Y_DUAL_STEPPER_DRIVERS" This reverts commit 7ee275b620.	преди 12 години
Richard Miles	7ee275b620	Added Y_DUAL_STEPPER_DRIVERS Enables two stepper drivers to be used for the Y axis (useful for Shapeoko style machines) Each Y driver can be stepped either the same way or in opposite directions, accounting for different hardware setups (leadscrew vs. belt driven)	преди 12 години
Erik van der Zalm	3626b5ad8b	Removed Delta from the default config file. Changed EEPROM CHITCHAT behavior. M503 is always enabled.	преди 12 години
Xoan Sampaiño	bf7007d02f	add ENCODER_PULSES_PER_STEP	преди 12 години
GDV0	f17506c504	FIx compilation error when enabling SERVO_ENDSTOPS (#591)	преди 12 години
Martin Lukasik	acd8619809	Fan fix for Panelolu2+Sanguinololu.	преди 12 години
George Roberts	595580556c	Fixed bug that makes ulticontroller knob backwards introduced Feb 28 2013 by Robert. Bug introduced in version 6beb42cdf6. Robert did a good job of simplifying but messed up this chunk of code. Looking at working version: 839bef6d5d it seems there is no case where encrot3 should be defined as 2 because if ULTICONTROLLER is defined then NEWPANEL is also defined.	преди 12 години
Tim Koster	88dfeefca3	Define BlinkM default disabled	преди 12 години
Tim Koster	7016cc9511	Added BlinkM support over i2c	преди 12 години
Tim Koster	3b315b3da0	Added BlinkM support over i2c	преди 12 години
Jim Morris	f26f26b7bd	Fix the example delta configuration as someone forgot to do it.	преди 12 години
Peter Hercek	9aa2229077	add command M666 for adjusting delta printer endstop position	преди 12 години
Robert F-C	9547fb9dfb	Add duplication and auto-park mode for dual x-carriage support.	преди 12 години
Steve Kelly	53614e5144	add pins for rambo lcd	преди 12 години
Steve Kelly	b42d24e31e	add additional pins to avr2560 for rambo lcd	преди 12 години
Nicolas Rossi	b0c8120fcc	Added feedrate setting in exemple config for manual moves from panel	преди 12 години
Guillaume Seguin	c0c4c97db6	Detect OS in Makefile to use the correct avrdude.conf path	преди 12 години
hg42@gmx.net	2ca983568d	separate INVERTING for MIN and MAX endstops (6 #defines instead of 3)	преди 12 години
hg42@gmx.net	3700f688f5	convert PROTOCOL macros from statements to (multiple, comma separated) expressions	преди 12 години
daid	a504c88346	Fix a bug where the PID controllers D action kicks in hard as soon as the PID controller starts.	преди 12 години
Nicolas Rossi	394ed08f88	Added feedrate setting for manual moves from panel	преди 12 години
Nicolas Rossi	9bf1cf1b22	Pre-calculate diagonal rod length squared	преди 12 години
Nicolas Rossi	4623e78ce0	Added Honeywell thermistor 135-104LAF-J01	преди 12 години
Brendan-csel	d7f384f680	Skip SD menu refresh if nothing has changed	преди 12 години
Brendan-csel	abc8320a68	Save LCD_CLICKED before it is cleared The SD card menu was refreshing so slowly that the button interrupt was clearing LCD_CLICKED before the menu items could check it.	преди 12 години
Guillaume Seguin	f4c3135c6d	Add Panelolu2 pins for RAMPS1.3	преди 12 години
Guillaume Seguin	aae42c68f9	Update French translation in language.h	преди 12 години
Guillaume Seguin	4d435c38a6	Add support of LiquidTWI2-based panels to Makefile Use LIQUID_TWI2=1 as make argument to enable this support	преди 12 години
Guillaume Seguin	6c42a3a339	Woops, fix logic	преди 12 години
Guillaume Seguin	376d8af2c8	Report temperatures for all extruders	преди 12 години
Brendan-csel	d80aecda0a	Skip SD menu refresh if nothing has changed	преди 12 години
Brendan-csel	be2dea1dc6	Save LCD_CLICKED before it is cleared The SD card menu was refreshing so slowly that the button interrupt was clearing LCD_CLICKED before the menu items could check it.	преди 12 години
Nicolas Rossi	55c287a69e	Fixed move from panel for delta bot #557	преди 12 години
Guillaume Seguin	1902d339b0	Add Panelolu2 pins for RAMPS1.3	преди 12 години
Guillaume Seguin	eb23a68e92	Update French translation in language.h	преди 12 години
Guillaume Seguin	374bc99fa3	Add support of LiquidTWI2-based panels to Makefile Use LIQUID_TWI2=1 as make argument to enable this support	преди 12 години
Jim Morris	ab624eac2a	revert COnfiguratiuon to the same as head	преди 12 години
Jim Morris	52f79ffeca	add an example default configuration for delta style bots	преди 12 години
Guillaume Seguin	d4d1540727	Use -fno-use-cxa-atexit to override gcc --enable-cxa_atexit	преди 12 години
Guillaume Seguin	01ed99143c	Woops, fix logic	преди 12 години
Guillaume Seguin	76841450c8	Only display poweron/poweroff if PS_ON_PIN > -1	преди 12 години
Guillaume Seguin	44f327d738	Uniformly reindent language.h	преди 12 години
Guillaume Seguin	326d2db025	Update language.h so that all languages compile Some strings still need translation, but at least everything compiles.	преди 12 години
Guillaume Seguin	2cb716f513	Run Marlin/language.h through dos2unix	преди 12 години
Robert F-C	fb5334f428	Fixed compile error when QUICK_HOME is defined. As well a couple of minor changes to handling of extruder offset for dual x-carriage mode.	преди 12 години
Robert F-C	c3568398b5	Disable DUAL_X_CARRIAGE by default	преди 12 години

Първа Предишна ... 93 94 95 96 97 Следваща Последна

4819 Ревизии (fa2467a834a3fe759ab315c632da41bcd45b53f5)