marlin/Marlin/src/lcd/menu/menu_configuration.cpp

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

//
// Configuration Menu
//

#include "../../inc/MarlinConfigPre.h"

#if HAS_LCD_MENU

#include "menu.h"

#include "../../module/configuration_store.h"

#if ENABLED(FILAMENT_RUNOUT_SENSOR)
  #include "../../feature/runout.h"
#endif

#define HAS_DEBUG_MENU ENABLED(LCD_PROGRESS_BAR_TEST)

void menu_advanced_settings();
void menu_delta_calibrate();

#if HAS_LCD_CONTRAST
  void lcd_callback_set_contrast() { set_lcd_contrast(lcd_contrast); }
#endif

static void lcd_factory_settings() {
  settings.reset();
  lcd_completion_feedback();
}

#if ENABLED(LCD_PROGRESS_BAR_TEST)

  static void progress_bar_test() {
    static int8_t bar_percent = 0;
    if (use_click()) {
      lcd_goto_previous_menu();
      LCD_SET_CHARSET(CHARSET_MENU);
      return;
    }
    bar_percent += (int8_t)encoderPosition;
    bar_percent = constrain(bar_percent, 0, 100);
    encoderPosition = 0;
    lcd_implementation_drawmenu_static(0, PSTR(MSG_PROGRESS_BAR_TEST), true, true);
    lcd_moveto((LCD_WIDTH) / 2 - 2, LCD_HEIGHT - 2);
    lcd_put_u8str(int(bar_percent)); lcd_put_wchar('%');
    lcd_moveto(0, LCD_HEIGHT - 1); lcd_draw_progress_bar(bar_percent);
  }

  void _progress_bar_test() {
    lcd_goto_screen(progress_bar_test);
    LCD_SET_CHARSET(CHARSET_INFO);
  }

#endif // LCD_PROGRESS_BAR_TEST

#if HAS_DEBUG_MENU

  void menu_debug() {
    START_MENU();

    MENU_BACK(MSG_MAIN);

    #if ENABLED(LCD_PROGRESS_BAR_TEST)
      MENU_ITEM(submenu, MSG_PROGRESS_BAR_TEST, _progress_bar_test);
    #endif

    END_MENU();
  }

#endif

#if EXTRUDERS > 1

  #include "../../module/tool_change.h"

  void menu_tool_change() {
    START_MENU();
    MENU_BACK(MSG_MAIN);
    #if ENABLED(TOOLCHANGE_PARK)
      MENU_ITEM_EDIT(float3, MSG_FILAMENT_SWAP_LENGTH, &toolchange_settings.swap_length, 0, 200);
      MENU_MULTIPLIER_ITEM_EDIT(int4, MSG_SINGLENOZZLE_RETRACT_SPD, &toolchange_settings.retract_speed, 10, 5400);
      MENU_MULTIPLIER_ITEM_EDIT(int4, MSG_SINGLENOZZLE_PRIME_SPD, &toolchange_settings.prime_speed, 10, 5400);
    #endif
    MENU_ITEM_EDIT(float3, MSG_TOOL_CHANGE_ZLIFT, &toolchange_settings.z_raise, 0, 10);
    END_MENU();
  }

#endif

#if ENABLED(DUAL_X_CARRIAGE)

  #include "../../module/motion.h"
  #include "../../gcode/queue.h"

  void _recalc_IDEX_settings() {
    if (active_extruder) {                      // For the 2nd extruder re-home so the next tool-change gets the new offsets.
      enqueue_and_echo_commands_P(PSTR("G28")); // In future, we can babystep the 2nd extruder (if active), making homing unnecessary.
      active_extruder = 0;
    }
  }

  void menu_IDEX() {
    START_MENU();
    MENU_BACK(MSG_MAIN);

    MENU_ITEM(gcode, MSG_IDEX_MODE_AUTOPARK,  PSTR("M605 S1\nG28 X\nG1 X100"));
    const bool need_g28 = !(TEST(axis_known_position, Y_AXIS) && TEST(axis_known_position, Z_AXIS));
    MENU_ITEM(gcode, MSG_IDEX_MODE_DUPLICATE, need_g28
      ? PSTR("M605 S1\nT0\nG28\nM605 S2 X200\nG28 X\nG1 X100")                // If Y or Z is not homed, do a full G28 first
      : PSTR("M605 S1\nT0\nM605 S2 X200\nG28 X\nG1 X100")
    );
    //MENU_ITEM(gcode, MSG_IDEX_MODE_SCALED_COPY, need_g28
    //  ? PSTR("M605 S1\nT0\nG28\nM605 S2 X200\nG28 X\nG1 X100\nM605 S3 X200")  // If Y or Z is not homed, do a full G28 first
    //  : PSTR("M605 S1\nT0\nM605 S2 X200\nG28 X\nG1 X100\nM605 S3 X200")
    //);
    MENU_ITEM(gcode, MSG_IDEX_MODE_FULL_CTRL, PSTR("M605 S0\nG28 X"));
    MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float52, MSG_IDEX_X_OFFSET , &hotend_offset[X_AXIS][1], MIN(X2_HOME_POS, X2_MAX_POS) - 25.0, MAX(X2_HOME_POS, X2_MAX_POS) + 25.0, _recalc_IDEX_settings);
    MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float52, MSG_IDEX_Y_OFFSET , &hotend_offset[Y_AXIS][1], -10.0, 10.0, _recalc_IDEX_settings);
    MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float52, MSG_IDEX_Z_OFFSET , &hotend_offset[Z_AXIS][1], -10.0, 10.0, _recalc_IDEX_settings);
    MENU_ITEM(gcode, MSG_IDEX_SAVE_OFFSETS, PSTR("M500"));
    END_MENU();
  }

#endif

#if ENABLED(BLTOUCH)

  void menu_bltouch() {
    START_MENU();
    MENU_BACK(MSG_MAIN);
    MENU_ITEM(gcode, MSG_BLTOUCH_RESET, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_RESET)));
    MENU_ITEM(gcode, MSG_BLTOUCH_SELFTEST, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_SELFTEST)));
    MENU_ITEM(gcode, MSG_BLTOUCH_DEPLOY, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_DEPLOY)));
    MENU_ITEM(gcode, MSG_BLTOUCH_STOW, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_STOW)));
    END_MENU();
  }

#endif

#if ENABLED(MENU_ITEM_CASE_LIGHT)

  #include "../../feature/caselight.h"

  void menu_case_light() {
    START_MENU();
    MENU_BACK(MSG_MAIN);
    MENU_ITEM_EDIT_CALLBACK(int8, MSG_CASE_LIGHT_BRIGHTNESS, &case_light_brightness, 0, 255, update_case_light, true);
    MENU_ITEM_EDIT_CALLBACK(bool, MSG_CASE_LIGHT, (bool*)&case_light_on, update_case_light);
    END_MENU();
  }

#endif

#if ENABLED(FWRETRACT)

  #include "../../feature/fwretract.h"

  void menu_config_retract() {
    START_MENU();
    MENU_BACK(MSG_CONTROL);
    #if ENABLED(FWRETRACT_AUTORETRACT)
      MENU_ITEM_EDIT_CALLBACK(bool, MSG_AUTORETRACT, &fwretract.autoretract_enabled, fwretract.refresh_autoretract);
    #endif
    MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT, &fwretract.settings.retract_length, 0, 100);
    #if EXTRUDERS > 1
      MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_SWAP, &fwretract.settings.swap_retract_length, 0, 100);
    #endif
    MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACTF, &fwretract.settings.retract_feedrate_mm_s, 1, 999);
    MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_ZHOP, &fwretract.settings.retract_zraise, 0, 999);
    MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_RECOVER, &fwretract.settings.retract_recover_length, -100, 100);
    #if EXTRUDERS > 1
      MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_RECOVER_SWAP, &fwretract.settings.swap_retract_recover_length, -100, 100);
    #endif
    MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACT_RECOVERF, &fwretract.settings.retract_recover_feedrate_mm_s, 1, 999);
    #if EXTRUDERS > 1
      MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACT_RECOVER_SWAPF, &fwretract.settings.swap_retract_recover_feedrate_mm_s, 1, 999);
    #endif
    END_MENU();
  }

#endif

#if ENABLED(DAC_STEPPER_CURRENT)

  #include "../../feature/dac/stepper_dac.h"

  uint8_t driverPercent[XYZE];
  inline void dac_driver_getValues() { LOOP_XYZE(i) driverPercent[i] = dac_current_get_percent((AxisEnum)i); }
  static void dac_driver_commit() { dac_current_set_percents(driverPercent); }

  void menu_dac() {
    dac_driver_getValues();
    START_MENU();
    MENU_BACK(MSG_CONTROL);
    #define EDIT_DAC_PERCENT(N) MENU_ITEM_EDIT_CALLBACK(int8, MSG_##N " " MSG_DAC_PERCENT, &driverPercent[_AXIS(N)], 0, 100, dac_driver_commit)
    EDIT_DAC_PERCENT(X);
    EDIT_DAC_PERCENT(Y);
    EDIT_DAC_PERCENT(Z);
    EDIT_DAC_PERCENT(E);
    MENU_ITEM(function, MSG_DAC_EEPROM_WRITE, dac_commit_eeprom);
    END_MENU();
  }

#endif

#if HAS_MOTOR_CURRENT_PWM

  #include "../../module/stepper.h"

  void menu_pwm() {
    START_MENU();
    MENU_BACK(MSG_CONTROL);
    #define EDIT_CURRENT_PWM(LABEL,I) MENU_ITEM_EDIT_CALLBACK(long5, LABEL, &stepper.motor_current_setting[I], 100, 2000, stepper.refresh_motor_power)
    #if PIN_EXISTS(MOTOR_CURRENT_PWM_XY)
      EDIT_CURRENT_PWM(MSG_X MSG_Y, 0);
    #endif
    #if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
      EDIT_CURRENT_PWM(MSG_Z, 1);
    #endif
    #if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
      EDIT_CURRENT_PWM(MSG_E, 2);
    #endif
    END_MENU();
  }

#endif

#if DISABLED(SLIM_LCD_MENUS)

  void _menu_configuration_preheat_settings(const uint8_t material) {
    #if HOTENDS > 5
      #define MINTEMP_ALL MIN(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP, HEATER_4_MINTEMP, HEATER_5_MINTEMP)
      #define MAXTEMP_ALL MAX(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP, HEATER_5_MAXTEMP)
    #elif HOTENDS > 4
      #define MINTEMP_ALL MIN(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP, HEATER_4_MINTEMP)
      #define MAXTEMP_ALL MAX(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP)
    #elif HOTENDS > 3
      #define MINTEMP_ALL MIN(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP)
      #define MAXTEMP_ALL MAX(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP)
    #elif HOTENDS > 2
      #define MINTEMP_ALL MIN(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP)
      #define MAXTEMP_ALL MAX(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP)
    #elif HOTENDS > 1
      #define MINTEMP_ALL MIN(HEATER_0_MINTEMP, HEATER_1_MINTEMP)
      #define MAXTEMP_ALL MAX(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP)
    #else
      #define MINTEMP_ALL HEATER_0_MINTEMP
      #define MAXTEMP_ALL HEATER_0_MAXTEMP
    #endif
    START_MENU();
    MENU_BACK(MSG_CONFIGURATION);
    MENU_ITEM_EDIT(int8, MSG_FAN_SPEED, &lcd_preheat_fan_speed[material], 0, 255);
    #if HAS_TEMP_HOTEND
      MENU_ITEM_EDIT(int3, MSG_NOZZLE, &lcd_preheat_hotend_temp[material], MINTEMP_ALL, MAXTEMP_ALL - 15);
    #endif
    #if HAS_HEATED_BED
      MENU_ITEM_EDIT(int3, MSG_BED, &lcd_preheat_bed_temp[material], BED_MINTEMP, BED_MAXTEMP - 15);
    #endif
    #if ENABLED(EEPROM_SETTINGS)
      MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings);
    #endif
    END_MENU();
  }

  void menu_preheat_material1_settings() { _menu_configuration_preheat_settings(0); }
  void menu_preheat_material2_settings() { _menu_configuration_preheat_settings(1); }

#endif

void menu_configuration() {
  START_MENU();
  MENU_BACK(MSG_MAIN);

  //
  // Debug Menu when certain options are enabled
  //
  #if HAS_DEBUG_MENU
    MENU_ITEM(submenu, MSG_DEBUG_MENU, menu_debug);
  #endif

  MENU_ITEM(submenu, MSG_ADVANCED_SETTINGS, menu_advanced_settings);

  const bool busy = printer_busy();
  if (!busy) {
    //
    // Delta Calibration
    //
    #if ENABLED(DELTA_CALIBRATION_MENU) || ENABLED(DELTA_AUTO_CALIBRATION)
      MENU_ITEM(submenu, MSG_DELTA_CALIBRATE, menu_delta_calibrate);
    #endif

    #if ENABLED(DUAL_X_CARRIAGE)
      MENU_ITEM(submenu, MSG_IDEX_MENU, menu_IDEX);
    #endif

    #if ENABLED(BLTOUCH)
      MENU_ITEM(submenu, MSG_BLTOUCH, menu_bltouch);
    #endif
  }

  //
  // Set single nozzle filament retract and prime length
  //
  #if EXTRUDERS > 1
    MENU_ITEM(submenu, MSG_TOOL_CHANGE, menu_tool_change);
  #endif

  //
  // Set Case light on/off/brightness
  //
  #if ENABLED(MENU_ITEM_CASE_LIGHT)
    if (USEABLE_HARDWARE_PWM(CASE_LIGHT_PIN))
      MENU_ITEM(submenu, MSG_CASE_LIGHT, menu_case_light);
    else
      MENU_ITEM_EDIT_CALLBACK(bool, MSG_CASE_LIGHT, (bool*)&case_light_on, update_case_light);
  #endif

  #if HAS_LCD_CONTRAST
    MENU_ITEM_EDIT_CALLBACK(int3, MSG_CONTRAST, &lcd_contrast, LCD_CONTRAST_MIN, LCD_CONTRAST_MAX, lcd_callback_set_contrast, true);
  #endif
  #if ENABLED(FWRETRACT)
    MENU_ITEM(submenu, MSG_RETRACT, menu_config_retract);
  #endif
  #if ENABLED(DAC_STEPPER_CURRENT)
    MENU_ITEM(submenu, MSG_DRIVE_STRENGTH, menu_dac);
  #endif
  #if HAS_MOTOR_CURRENT_PWM
    MENU_ITEM(submenu, MSG_DRIVE_STRENGTH, menu_pwm);
  #endif

  #if ENABLED(FILAMENT_RUNOUT_SENSOR)
    MENU_ITEM_EDIT(bool, MSG_RUNOUT_SENSOR_ENABLE, &runout.enabled);
  #endif

  #if DISABLED(SLIM_LCD_MENUS)
    // Preheat configurations
    MENU_ITEM(submenu, MSG_PREHEAT_1_SETTINGS, menu_preheat_material1_settings);
    MENU_ITEM(submenu, MSG_PREHEAT_2_SETTINGS, menu_preheat_material2_settings);
  #endif

  #if ENABLED(EEPROM_SETTINGS)
    MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings);
    if (!busy)
      MENU_ITEM(function, MSG_LOAD_EEPROM, lcd_load_settings);
  #endif

  if (!busy)
    MENU_ITEM(function, MSG_RESTORE_FAILSAFE, lcd_factory_settings);

  END_MENU();
}

#endif // HAS_LCD_MENU