| .. |
|
Gen7
|
Fix cast warning in Gen7
|
13 роки тому |
|
Sanguino
|
Fixed compiler warning for Sanguino compile
|
13 роки тому |
|
hardware/tools/avr/etc
|
ATMega1284P support for Arduino IDE replace $ARDUINO_HOME/hardware/tools/avr/etc/arduino.conf with this file
|
13 роки тому |
|
COPYING
|
first commit
|
14 роки тому |
|
Configuration.h
|
Limit Switch locations based on MIN/MAX limits and homing direction fixes #246 Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined. Relocated code based on feedback.
|
13 роки тому |
|
Configuration_adv.h
|
Limit Switch locations based on MIN/MAX limits and homing direction fixes #246 Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined. Relocated code based on feedback.
|
13 роки тому |
|
EEPROMwrite.h
|
Added Menu Options to the Main-> Control->Temperature Submenu that allow the user to set new values for the ABS and PLA preheat function. EEPROM updated so that these settings can also be committed to EEPROM memory.
|
13 роки тому |
|
LCD Menu Tree.pdf
|
Added PDF file containing Menu Tree for documentation purposes. Source xlsx document included.
|
13 роки тому |
|
Makefile
|
Makefile: Better display of size (device memory usage)
|
13 роки тому |
|
Marlin.h
|
added KILL_PIN support / cleaned up manage_inactivity function definition
|
13 роки тому |
|
Marlin.pde
|
Changes to M119 response for easier visual comparison Changed to report on individual lines with "TRIGGERED" or "open" instead of "H" or "L" on one line as H&L could be confused with logic levels High and Low which may be wrong if using inverted logic. Added strings to language.h.
|
13 роки тому |
|
MarlinSerial.cpp
|
Teensylu support.
|
13 роки тому |
|
MarlinSerial.h
|
Teensylu support.
|
13 роки тому |
|
Menu Plans.xlsx
|
Tidy up
|
13 роки тому |
|
Sd2Card.cpp
|
Added long filename support.
|
13 роки тому |
|
Sd2Card.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 роки тому |
|
Sd2PinMap.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 роки тому |
|
SdBaseFile.cpp
|
Added long filename support.
|
13 роки тому |
|
SdBaseFile.h
|
Added long filename support.
|
13 роки тому |
|
SdFatConfig.h
|
Added long filename support.
|
13 роки тому |
|
SdFatStructs.h
|
Added long filename support.
|
13 роки тому |
|
SdFatUtil.cpp
|
Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.
|
13 роки тому |
|
SdFatUtil.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 роки тому |
|
SdFile.cpp
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 роки тому |
|
SdFile.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 роки тому |
|
SdInfo.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 роки тому |
|
SdVolume.cpp
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 роки тому |
|
SdVolume.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 роки тому |
|
cardreader.cpp
|
Added long filename support.
|
13 роки тому |
|
cardreader.h
|
Added long filename support.
|
13 роки тому |
|
createTemperatureLookup.py
|
first commit
|
14 роки тому |
|
create_speed_lookuptable.py
|
Added 20MHz support.
|
13 роки тому |
|
fastio.h
|
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
|
13 роки тому |
|
language.h
|
Spanish updated
|
13 роки тому |
|
motion_control.cpp
|
software_endstops: use *_MIN_POS and *_MAX_POS for arcs
|
13 роки тому |
|
motion_control.h
|
Removed interrupt nesting in the stepper ISR.
|
13 роки тому |
|
pins.h
|
Added KILL_PIN -1 to gen7 boards
|
13 роки тому |
|
planner.cpp
|
added KILL_PIN support / cleaned up manage_inactivity function definition
|
13 роки тому |
|
planner.h
|
Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer.
|
13 роки тому |
|
speed_lookuptable.h
|
Added 20MHz support.
|
13 роки тому |
|
stepper.cpp
|
added KILL_PIN support / cleaned up manage_inactivity function definition
|
13 роки тому |
|
stepper.h
|
merging
|
13 роки тому |
|
temperature.cpp
|
Missing #else in temperature.cpp prevented reading bed temp when TEMP_BED_PIN <7. Thanks to Leland Wallace for helping me track this down via "Sesame Street" coding (what is not like the other)
|
13 роки тому |
|
temperature.h
|
Added support for 2nd extruder temperature to UltraLCD
|
13 роки тому |
|
thermistortables.h
|
Correct temptable_55 name.
|
13 роки тому |
|
ultralcd.h
|
merged with upstream and FIXED AGAIN bad translation commit
|
13 роки тому |
|
ultralcd.pde
|
Update Marlin/ultralcd.pde
|
13 роки тому |
|
watchdog.h
|
__ header file replace
|
13 роки тому |
|
watchdog.pde
|
simplified the includes, makefile now works with arduino23
|
13 роки тому |
|
wiring.h
|
add wiring.h, that can be used to overwrite: arduino-0023/hardware/arduino/cores/arduino/wiring.h this is necessary if the avr libraries are recent, but arduino is old. Alternative: newer arduino
|
13 роки тому |
elgambitero
df09e2adce
Spanish updated