| .. |
|
Gen7
|
Fix Gen7 compile if you have avr-libc version 1.7.1 or higher. See http://code.google.com/p/arduino/issues/detail?id=604
|
12 年之前 |
|
Sanguino
|
Fixed compiler warning for Sanguino compile
|
13 年之前 |
|
hardware/tools/avr/etc
|
ATMega1284P support for Arduino IDE
|
13 年之前 |
|
COPYING
|
first commit
|
14 年之前 |
|
Configuration.h
|
Add support for Printrboard (from https://github.com/lincomatic/Marlin) and Brainwave (from https://github.com/metrix/Sprinter).
|
12 年之前 |
|
ConfigurationStore.cpp
|
Fixed #317
|
12 年之前 |
|
ConfigurationStore.h
|
Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.
|
12 年之前 |
|
Configuration_adv.h
|
Fix the WATCHPERIOD implementation. It did not work correctly in a multi extruder setup, it did not work after 32 seconds after startup (int16 used as millies timestamp). And it did not work if you gave an M104 or M109 when the target was already around the target setpoint. So on average, it did not work at all. The new implementation should be robust in detecting a failure to heat up.
|
12 年之前 |
|
LCD Menu Tree.pdf
|
Added PDF file containing Menu Tree for documentation purposes. Source xlsx document included.
|
13 年之前 |
|
LiquidCrystalRus.cpp
|
First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.
|
12 年之前 |
|
LiquidCrystalRus.h
|
Enables support the Cyrillic alphabet for LCD
|
12 年之前 |
|
Makefile
|
Small makefile change, posibility to add defines on the commandline, and fix compiling with watchdog enabled when using the Makefile.
|
12 年之前 |
|
Marlin.h
|
Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.
|
12 年之前 |
|
Marlin.pde
|
Mistake there, not sure why I did that. My bad.
|
12 年之前 |
|
MarlinSerial.cpp
|
Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.
|
12 年之前 |
|
MarlinSerial.h
|
Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.
|
12 年之前 |
|
Marlin_main.cpp
|
The Partial release message (which does not really tell you anything) overwrites the final print time on the LCD, which is a real shame. So I removed the message.
|
12 年之前 |
|
Menu Plans.xlsx
|
Tidy up
|
13 年之前 |
|
Sd2Card.cpp
|
Fix for a few -Wextra warnings.
|
12 年之前 |
|
Sd2Card.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 年之前 |
|
Sd2PinMap.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 年之前 |
|
SdBaseFile.cpp
|
Few simple fixes that save RAM, as static strings are stored in RAM by default.
|
12 年之前 |
|
SdBaseFile.h
|
Added long filename support.
|
13 年之前 |
|
SdFatConfig.h
|
Added long filename support.
|
13 年之前 |
|
SdFatStructs.h
|
Added long filename support.
|
13 年之前 |
|
SdFatUtil.cpp
|
Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.
|
13 年之前 |
|
SdFatUtil.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 年之前 |
|
SdFile.cpp
|
First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.
|
12 年之前 |
|
SdFile.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 年之前 |
|
SdInfo.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 年之前 |
|
SdVolume.cpp
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 年之前 |
|
SdVolume.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 年之前 |
|
cardreader.cpp
|
Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.
|
12 年之前 |
|
cardreader.h
|
Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.
|
12 年之前 |
|
createTemperatureLookupMarlin.py
|
Added new temperature lookup table creation tool. This one uses stein hart-hart equations. You need 3 temperature resistance:combinations. This gives a better result then using beta.
|
12 年之前 |
|
create_speed_lookuptable.py
|
Added 20MHz support.
|
13 年之前 |
|
fastio.h
|
Use the same fastio.h definition for AT90USB1286/7 and AT90USB646/7.
|
12 年之前 |
|
language.h
|
I hope last changes to french translation
|
12 年之前 |
|
motion_control.cpp
|
software_endstops: use *_MIN_POS and *_MAX_POS for arcs
|
13 年之前 |
|
motion_control.h
|
Removed interrupt nesting in the stepper ISR.
|
13 年之前 |
|
pins.h
|
Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.
|
12 年之前 |
|
planner.cpp
|
Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.
|
12 年之前 |
|
planner.h
|
Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer.
|
13 年之前 |
|
speed_lookuptable.h
|
Made the 2nd speed lookup table condition more explicit.
|
12 年之前 |
|
stepper.cpp
|
Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.
|
12 年之前 |
|
stepper.h
|
Few simple fixes that save RAM, as static strings are stored in RAM by default.
|
12 年之前 |
|
temperature.cpp
|
Fix the WATCHPERIOD implementation. It did not work correctly in a multi extruder setup, it did not work after 32 seconds after startup (int16 used as millies timestamp). And it did not work if you gave an M104 or M109 when the target was already around the target setpoint. So on average, it did not work at all. The new implementation should be robust in detecting a failure to heat up.
|
12 年之前 |
|
temperature.h
|
Fix the WATCHPERIOD implementation. It did not work correctly in a multi extruder setup, it did not work after 32 seconds after startup (int16 used as millies timestamp). And it did not work if you gave an M104 or M109 when the target was already around the target setpoint. So on average, it did not work at all. The new implementation should be robust in detecting a failure to heat up.
|
12 年之前 |
|
thermistortables.h
|
allow marlin internal 0°C represenation
|
12 年之前 |
|
ultralcd.cpp
|
Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.
|
12 年之前 |
|
ultralcd.h
|
Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.
|
12 年之前 |
|
watchdog.cpp
|
Fix compiling the watchdog error message when the manual reset watchdog is used.
|
12 年之前 |
|
watchdog.h
|
First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.
|
12 年之前 |
|
wiring.h
|
add wiring.h, that can be used to overwrite:
|
13 年之前 |
Johann Rocholl