| .. |
|
Gen7
|
Fix cast warning in Gen7
|
hace 13 años |
|
Sanguino
|
Fixed compiler warning for Sanguino compile
|
hace 13 años |
|
hardware/tools/avr/etc
|
ATMega1284P support for Arduino IDE replace $ARDUINO_HOME/hardware/tools/avr/etc/arduino.conf with this file
|
hace 13 años |
|
COPYING
|
first commit
|
hace 14 años |
|
Configuration.h
|
Limit Switch locations based on MIN/MAX limits and homing direction fixes #246 Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined. Relocated code based on feedback.
|
hace 13 años |
|
Configuration_adv.h
|
Limit Switch locations based on MIN/MAX limits and homing direction fixes #246 Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined. Relocated code based on feedback.
|
hace 13 años |
|
EEPROMwrite.h
|
Added Menu Options to the Main-> Control->Temperature Submenu that allow the user to set new values for the ABS and PLA preheat function. EEPROM updated so that these settings can also be committed to EEPROM memory.
|
hace 13 años |
|
LCD Menu Tree.pdf
|
Added PDF file containing Menu Tree for documentation purposes. Source xlsx document included.
|
hace 13 años |
|
Makefile
|
Makefile: Better display of size (device memory usage)
|
hace 13 años |
|
Marlin.h
|
added KILL_PIN support / cleaned up manage_inactivity function definition
|
hace 13 años |
|
Marlin.pde
|
Changes to M119 response for easier visual comparison Changed to report on individual lines with "TRIGGERED" or "open" instead of "H" or "L" on one line as H&L could be confused with logic levels High and Low which may be wrong if using inverted logic. Added strings to language.h.
|
hace 13 años |
|
MarlinSerial.cpp
|
Teensylu support.
|
hace 13 años |
|
MarlinSerial.h
|
Teensylu support.
|
hace 13 años |
|
Menu Plans.xlsx
|
Tidy up
|
hace 13 años |
|
Sd2Card.cpp
|
Added long filename support.
|
hace 13 años |
|
Sd2Card.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
hace 13 años |
|
Sd2PinMap.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
hace 13 años |
|
SdBaseFile.cpp
|
Added long filename support.
|
hace 13 años |
|
SdBaseFile.h
|
Added long filename support.
|
hace 13 años |
|
SdFatConfig.h
|
Added long filename support.
|
hace 13 años |
|
SdFatStructs.h
|
Added long filename support.
|
hace 13 años |
|
SdFatUtil.cpp
|
Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.
|
hace 13 años |
|
SdFatUtil.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
hace 13 años |
|
SdFile.cpp
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
hace 13 años |
|
SdFile.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
hace 13 años |
|
SdInfo.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
hace 13 años |
|
SdVolume.cpp
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
hace 13 años |
|
SdVolume.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
hace 13 años |
|
cardreader.cpp
|
Added long filename support.
|
hace 13 años |
|
cardreader.h
|
Added long filename support.
|
hace 13 años |
|
createTemperatureLookup.py
|
first commit
|
hace 14 años |
|
create_speed_lookuptable.py
|
Added 20MHz support.
|
hace 13 años |
|
fastio.h
|
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
|
hace 13 años |
|
language.h
|
New dialogs translated to spanish. Bug fixes.
|
hace 13 años |
|
motion_control.cpp
|
software_endstops: use *_MIN_POS and *_MAX_POS for arcs
|
hace 13 años |
|
motion_control.h
|
Removed interrupt nesting in the stepper ISR.
|
hace 13 años |
|
pins.h
|
Added KILL_PIN -1 to gen7 boards
|
hace 13 años |
|
planner.cpp
|
added KILL_PIN support / cleaned up manage_inactivity function definition
|
hace 13 años |
|
planner.h
|
Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer.
|
hace 13 años |
|
speed_lookuptable.h
|
Added 20MHz support.
|
hace 13 años |
|
stepper.cpp
|
added KILL_PIN support / cleaned up manage_inactivity function definition
|
hace 13 años |
|
stepper.h
|
merging
|
hace 13 años |
|
temperature.cpp
|
Missing #else in temperature.cpp prevented reading bed temp when TEMP_BED_PIN <7. Thanks to Leland Wallace for helping me track this down via "Sesame Street" coding (what is not like the other)
|
hace 13 años |
|
temperature.h
|
Added support for 2nd extruder temperature to UltraLCD
|
hace 13 años |
|
thermistortables.h
|
Correct temptable_55 name.
|
hace 13 años |
|
ultralcd.h
|
merged with upstream and FIXED AGAIN bad translation commit
|
hace 13 años |
|
ultralcd.pde
|
Update Marlin/ultralcd.pde
|
hace 13 años |
|
watchdog.h
|
__ header file replace
|
hace 13 años |
|
watchdog.pde
|
simplified the includes, makefile now works with arduino23
|
hace 13 años |
|
wiring.h
|
add wiring.h, that can be used to overwrite: arduino-0023/hardware/arduino/cores/arduino/wiring.h this is necessary if the avr libraries are recent, but arduino is old. Alternative: newer arduino
|
hace 13 años |
elgambitero
7afd202b89
New dialogs translated to spanish. Bug fixes.