marlin/Marlin/language.h

#ifndef LANGUAGE_H
#define LANGUAGE_H

// Languages
// 1  Custom (For you to add your own messages)
// 2  English 
// 3  French	(Waiting translation)
// 4  German
// 5  Etc

#define LANGUAGE_CHOICE 1  // Pick your language from the list above

#define PROTOCOL_VERSION "1.0"

#if MOTHERBOARD == 7 || MOTHERBOARD == 71
	#define MACHINE_NAME "Ultimaker"
	#define FIRMWARE_URL "http://firmware.ultimaker.com"
#else
	#define MACHINE_NAME "Mendel"
	#define FIRMWARE_URL "http://www.mendel-parts.com"
#endif

#define STRINGIFY_(n) #n
#define STRINGIFY(n) STRINGIFY_(n)

#if LANGUAGE_CHOICE == 1

// LCD Menu Messages
	#define WELCOME_MSG MACHINE_NAME " Ready."
	#define MSG_SD_INSERTED "Card inserted"
	#define MSG_SD_REMOVED "Card removed"
	#define MSG_MAIN " Main \003"
	#define MSG_AUTOSTART " Autostart"
	#define MSG_DISABLE_STEPPERS " Disable Steppers"
	#define MSG_AUTO_HOME " Auto Home"
	#define MSG_SET_ORIGIN " Set Origin"
	#define MSG_COOLDOWN " Cooldown"
	#define MSG_EXTRUDE " Extrude"
    #define MSG_RETRACT" Retract"
	#define MSG_PREHEAT_PLA " Preheat PLA"
	#define MSG_PREHEAT_ABS " Preheat ABS"
	#define MSG_MOVE_AXIS " Move Axis      \x7E"
	#define MSG_SPEED " Speed:"
	#define MSG_NOZZLE " \002Nozzle:"
	#define MSG_NOZZLE1 " \002Nozzle2:"
	#define MSG_NOZZLE2 " \002Nozzle3:"
	#define MSG_BED " \002Bed:"
	#define MSG_FAN_SPEED " Fan speed:"
	#define MSG_FLOW " Flow:"
	#define MSG_CONTROL " Control \003"
	#define MSG_MIN " \002 Min:"
	#define MSG_MAX " \002 Max:"
	#define MSG_FACTOR " \002 Fact:"
	#define MSG_AUTOTEMP " Autotemp:"
	#define MSG_ON "On "
	#define MSG_OFF "Off"
	#define MSG_PID_P " PID-P: "
	#define MSG_PID_I " PID-I: "
	#define MSG_PID_D " PID-D: "
	#define MSG_PID_C " PID-C: "
	#define MSG_ACC  " Acc:"
	#define MSG_VXY_JERK " Vxy-jerk: "
	#define MSG_VMAX " Vmax "
	#define MSG_X "x:"
	#define MSG_Y "y:"
	#define MSG_Z "z:"
	#define MSG_E "e:"
	#define MSG_VMIN " Vmin:"
	#define MSG_VTRAV_MIN " VTrav min:"
	#define MSG_AMAX " Amax "
	#define MSG_A_RETRACT " A-retract:"
	#define MSG_XSTEPS " Xsteps/mm:"
	#define MSG_YSTEPS " Ysteps/mm:"
	#define MSG_ZSTEPS " Zsteps/mm:"
	#define MSG_ESTEPS " Esteps/mm:"
	#define MSG_MAIN_WIDE " Main        \003"
	#define MSG_RECTRACT_WIDE " Rectract    \x7E"
	#define MSG_TEMPERATURE_WIDE " Temperature \x7E"
	#define MSG_MOTION_WIDE " Motion      \x7E"
	#define MSG_STORE_EPROM " Store memory"
	#define MSG_LOAD_EPROM " Load memory"
	#define MSG_RESTORE_FAILSAFE " Restore Failsafe"
	#define MSG_REFRESH "\004Refresh"
	#define MSG_WATCH " Watch   \003"
	#define MSG_PREPARE " Prepare \x7E"
	#define MSG_PREPARE_ALT " Prepare \003"
	#define MSG_CONTROL_ARROW " Control \x7E"
	#define MSG_RETRACT_ARROW " Control \x7E"
	#define MSG_TUNE " Tune    \x7E"
    #define MSG_PAUSE_PRINT " Pause Print  \x7E"
    #define MSG_RESUME_PRINT " Resume Print \x7E"
	#define MSG_STOP_PRINT " Stop Print   \x7E"
	#define MSG_CARD_MENU " Card Menu    \x7E"
	#define MSG_NO_CARD " No Card"
	#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure."
	#define MSG_DWELL "Sleep..."
	#define MSG_USERWAIT "Wait for user..."
	#define MSG_NO_MOVE "No move."
	#define MSG_PART_RELEASE "Partial Release"
	#define MSG_KILLED "KILLED. "
	#define MSG_STOPPED "STOPPED. "
	#define MSG_STEPPER_RELEASED "Released."
	#define MSG_CONTROL_RETRACT  " Retract mm:"
	#define MSG_CONTROL_RETRACTF " Retract  F:"
	#define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:"
	#define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
	#define MSG_CONTROL_RETRACT_RECOVERF " UnRet  F:"
	#define MSG_AUTORETRACT " AutoRetr.:"

// Serial Console Messages

	#define MSG_Enqueing "enqueing \""
	#define MSG_POWERUP "PowerUp"
	#define MSG_EXTERNAL_RESET " External Reset"
	#define MSG_BROWNOUT_RESET " Brown out Reset"
	#define MSG_WATCHDOG_RESET " Watchdog Reset"
	#define MSG_SOFTWARE_RESET " Software Reset"
	#define MSG_MARLIN "Marlin "
	#define MSG_AUTHOR " | Author: "
	#define MSG_CONFIGURATION_VER " Last Updated: "
	#define MSG_FREE_MEMORY " Free Memory: "
	#define MSG_PLANNER_BUFFER_BYTES "  PlannerBufferBytes: "
	#define MSG_OK "ok"
	#define MSG_FILE_SAVED "Done saving file."
	#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:"
	#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:"
	#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:"
	#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:"
	#define MSG_FILE_PRINTED "Done printing file"
	#define MSG_BEGIN_FILE_LIST "Begin file list"
	#define MSG_END_FILE_LIST "End file list"
	#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
	#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
	#define MSG_ERR_NO_THERMISTORS "No thermistors - no temp"
	#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
	#define MSG_HEATING "Heating..."
	#define MSG_HEATING_COMPLETE "Heating done."
	#define MSG_BED_HEATING "Bed Heating."
	#define MSG_BED_DONE "Bed done."
	#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
	#define MSG_COUNT_X " Count X:"
	#define MSG_ERR_KILLED "Printer halted. kill() called !!"
	#define MSG_ERR_STOPPED "Printer stopped deu to errors. Fix the error and use M999 to restart!. (Temperature is reset. Set it before restarting)"
	#define MSG_RESEND "Resend:"
	#define MSG_UNKNOWN_COMMAND "Unknown command:\""
	#define MSG_ACTIVE_EXTRUDER "Active Extruder: "
	#define MSG_INVALID_EXTRUDER "Invalid extruder"
	#define MSG_X_MIN "x_min:"
	#define MSG_X_MAX "x_max:"
	#define MSG_Y_MIN "y_min:"
	#define MSG_Y_MAX "y_max:"
	#define MSG_Z_MIN "z_min:"
	#define MSG_Z_MAX "z_max:"

	#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
	#define MSG_SD_INIT_FAIL "SD init fail"
	#define MSG_SD_VOL_INIT_FAIL "volume.init failed"
	#define MSG_SD_OPENROOT_FAIL "openRoot failed"
	#define MSG_SD_CARD_OK "SD card ok"
	#define MSG_SD_WORKDIR_FAIL "workDir open failed"
	#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
	#define MSG_SD_FILE_OPENED "File opened:"
	#define MSG_SD_SIZE " Size:"
	#define MSG_SD_FILE_SELECTED "File selected"
	#define MSG_SD_WRITE_TO_FILE "Writing to file: "
	#define MSG_SD_PRINTING_BYTE "SD printing byte "
	#define MSG_SD_NOT_PRINTING "Not SD printing"
	#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
	#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"

	#define MSG_STEPPER_TO_HIGH "Steprate to high : "
	#define MSG_ENDSTOPS_HIT "endstops hit: "
	#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
	#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"

#endif
#if LANGUAGE_CHOICE == 4

// LCD Menu Messages
	#define WELCOME_MSG MACHINE_NAME " Bereit."
	#define MSG_SD_INSERTED "Karte eingelegt"
	#define MSG_SD_REMOVED "Karte entfernt"
	#define MSG_MAIN " Haupt \003"
	#define MSG_AUTOSTART " Autostart"
	#define MSG_DISABLE_STEPPERS " Motoren abschalten"
	#define MSG_AUTO_HOME " Auto Heim"
	#define MSG_SET_ORIGIN " Position setzen"
	#define MSG_COOLDOWN " Abkuehlen"
	#define MSG_EXTRUDE " Druck"
	#define MSG_PREHEAT_PLA " Aufheizen PLA"
	#define MSG_PREHEAT_ABS " Aufheizen ABS"
	#define MSG_MOVE_AXIS " Achse bewegen   \x7E"
	#define MSG_SPEED " Geschw:"
	#define MSG_NOZZLE " \002Duese:"
	#define MSG_NOZZLE1 " \002Duese2:"
	#define MSG_NOZZLE2 " \002Duese3:"
	#define MSG_BED " \002Bett:"
	#define MSG_FAN_SPEED " Luefter Geschw.:"
	#define MSG_FLOW " Fluss:"
	#define MSG_CONTROL " Kontrolle \003"
	#define MSG_MIN " \002 Min:"
	#define MSG_MAX " \002 Max:"
	#define MSG_FACTOR " \002 Faktor:"
	#define MSG_AUTOTEMP " AutoTemp:"
	#define MSG_ON "Ein "
	#define MSG_OFF "Aus "
	#define MSG_PID_P " PID-P: "
	#define MSG_PID_I " PID-I: "
	#define MSG_PID_D " PID-D: "
	#define MSG_PID_C " PID-C: "
	#define MSG_ACC  " Acc:"
	#define MSG_VXY_JERK " Vxy-jerk: "
	#define MSG_VMAX " Vmax "
	#define MSG_X "x:"
	#define MSG_Y "y:"
	#define MSG_Z "z:"
	#define MSG_E "e:"
	#define MSG_VMIN " Vmin:"
	#define MSG_VTRAV_MIN " VTrav min:"
	#define MSG_AMAX " Amax "
	#define MSG_A_RETRACT " A-Rueckzug:"
	#define MSG_XSTEPS " Xsteps/mm:"
	#define MSG_YSTEPS " Ysteps/mm:"
	#define MSG_ZSTEPS " Zsteps/mm:"
	#define MSG_ESTEPS " Esteps/mm:"
	#define MSG_MAIN_WIDE " Hauptmenue  \003"
	#define MSG_RECTRACT_WIDE " Rueckzug    \x7E"
	#define MSG_TEMPERATURE_WIDE " Temperatur \x7E"
	#define MSG_MOTION_WIDE " Bewegung    \x7E"
	#define MSG_STORE_EPROM " EPROM speichern"
	#define MSG_LOAD_EPROM "  EPROM laden"
	#define MSG_RESTORE_FAILSAFE " Standard Konfig."
	#define MSG_REFRESH "\004Aktualisieren"
	#define MSG_WATCH " Beobachten   \003"
	#define MSG_PREPARE " Vorbereiten \x7E"
	#define MSG_PREPARE_ALT " Vorbereiten \003"
	#define MSG_CONTROL_ARROW " Kontrolle \x7E"
	#define MSG_RETRACT_ARROW " Control \x7E"
	#define MSG_TUNE " Tune    \x7E"
	#define MSG_STOP_PRINT " Druck stoppen   \x7E"
	#define MSG_CARD_MENU " SDKarten Menue    \x7E"
	#define MSG_NO_CARD " Keine SDKarte"
	#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Fehler in der  Menuestruktur."
	#define MSG_DWELL "verweilen..."
	#define MSG_USERWAIT "Warten auf Nutzer..."
	#define MSG_NO_MOVE "Keine Bewegung."
	#define MSG_PART_RELEASE "Teil loesen"
	#define MSG_KILLED "GEKILLT. "
	#define MSG_STOPPED "GESTOPPT. "
	#define MSG_STEPPER_RELEASED "Freigegeben."
	#define MSG_CONTROL_RETRACT  " Rueckzug mm:"
	#define MSG_CONTROL_RETRACTF " Rueckzug  F:"
	#define MSG_CONTROL_RETRACT_ZLIFT " Z Sprung mm:"
	#define MSG_CONTROL_RETRACT_RECOVER " Vorschub +mm:"
	#define MSG_CONTROL_RETRACT_RECOVERF " Vorschub  F:"
	#define MSG_AUTORETRACT " AutoRueckzug.:"

// Serial Console Messages

	#define MSG_Enqueing "enqueing \""
	#define MSG_POWERUP "PowerUp"
	#define MSG_EXTERNAL_RESET " External Reset"
	#define MSG_BROWNOUT_RESET " Brown out Reset"
	#define MSG_WATCHDOG_RESET " Watchdog Reset"
	#define MSG_SOFTWARE_RESET " Software Reset"
	#define MSG_MARLIN "Marlin: "
	#define MSG_AUTHOR " | Author: "
	#define MSG_CONFIGURATION_VER " Last Updated: "
	#define MSG_FREE_MEMORY " Free Memory: "
	#define MSG_PLANNER_BUFFER_BYTES "  PlannerBufferBytes: "
	#define MSG_OK "ok"
	#define MSG_FILE_SAVED "Done saving file."
	#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:"
	#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:"
	#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:"
	#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:"
	#define MSG_FILE_PRINTED "Done printing file"
	#define MSG_BEGIN_FILE_LIST "Begin file list"
	#define MSG_END_FILE_LIST "End file list"
	#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
	#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
	#define MSG_ERR_NO_THERMISTORS "No thermistors - no temp"
	#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
	#define MSG_HEATING "Heating..."
	#define MSG_HEATING_COMPLETE "Heating done."
	#define MSG_BED_HEATING "Bed Heating."
	#define MSG_BED_DONE "Bed done."
	#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
	#define MSG_COUNT_X " Count X:"
	#define MSG_ERR_KILLED "Printer halted. kill() called !!"
	#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!"
	#define MSG_RESEND "Resend:"
	#define MSG_UNKNOWN_COMMAND "Unknown command:\""
	#define MSG_ACTIVE_EXTRUDER "Active Extruder: "
	#define MSG_INVALID_EXTRUDER "Invalid extruder"
	#define MSG_X_MIN "x_min:"
	#define MSG_X_MAX "x_max:"
	#define MSG_Y_MIN "y_min:"
	#define MSG_Y_MAX "y_max:"
	#define MSG_Z_MIN "z_min:"
	#define MSG_Z_MAX "z_max:"

	#define MSG_SD_CANT_OPEN_SUBDIR "Verz. kein Zugriff"
	#define MSG_SD_INIT_FAIL "SD init Fehler"
	#define MSG_SD_VOL_INIT_FAIL "volume.init Fehler"
	#define MSG_SD_OPENROOT_FAIL "openRoot Fehler"
	#define MSG_SD_CARD_OK "SDKarte ok"
	#define MSG_SD_WORKDIR_FAIL "workDir Oeffnen Fehler"
	#define MSG_SD_OPEN_FILE_FAIL "Fehler: Oeffnen Datei: "
	#define MSG_SD_FILE_OPENED "Datei geoeffnet:"
	#define MSG_SD_SIZE " Groesse:"
	#define MSG_SD_FILE_SELECTED "Datei selektiert"
	#define MSG_SD_WRITE_TO_FILE "Schreibe in Datei: "
	#define MSG_SD_PRINTING_BYTE "SD druckt byte "
	#define MSG_SD_NOT_PRINTING "Druckt nicht von SD"
	#define MSG_SD_ERR_WRITE_TO_FILE "Datei Schreibfehler"
	#define MSG_SD_CANT_ENTER_SUBDIR "Kann Verz. nicht wechseln:"

	#define MSG_STEPPER_TO_HIGH "Steprate zu hoch : "
	#define MSG_ENDSTOPS_HIT "Endstop erreicht: "
	#define MSG_ERR_COLD_EXTRUDE_STOP " kalter Druck unterbunden"
	#define MSG_ERR_LONG_EXTRUDE_STOP " langer Druckweg unterbunden"

#endif
#endif // ifndef LANGUAGE_H