My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Nevar pievienot vairāk kā 25 tēmas Tēmai ir jāsākas ar burtu vai ciparu, tā var saturēt domu zīmes ('-') un var būt līdz 35 simboliem gara.

Conditionals.h 20KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * Conditionals.h
  24. * Defines that depend on configuration but are not editable.
  25. */
  26. #ifndef CONDITIONALS_H
  27. /**
  28. * Miscellaneous
  29. */
  30. #ifndef M_PI
  31. #define M_PI 3.1415926536
  32. #endif
  33. /**
  34. * This value is used by M109 when tying to calculate a ballpark safe margin
  35. * to prevent wait-forever situation.
  36. */
  37. #ifndef EXTRUDE_MINTEMP
  38. #define EXTRUDE_MINTEMP 170
  39. #endif
  40. #ifndef CONFIGURATION_LCD // Get the LCD defines which are needed first
  41. #define CONFIGURATION_LCD
  42. #if ENABLED(MAKRPANEL)
  43. #define DOGLCD
  44. #define DEFAULT_LCD_CONTRAST 17
  45. #define ULTIPANEL
  46. #define NEWPANEL
  47. #endif
  48. #if ENABLED(miniVIKI) || ENABLED(VIKI2) || ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
  49. #define ULTRA_LCD //general LCD support, also 16x2
  50. #define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
  51. #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store.
  52. #if ENABLED(miniVIKI)
  53. #define DEFAULT_LCD_CONTRAST 95
  54. #elif ENABLED(VIKI2)
  55. #define DEFAULT_LCD_CONTRAST 40
  56. #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
  57. #define DEFAULT_LCD_CONTRAST 110
  58. #define U8GLIB_LM6059_AF
  59. #endif
  60. #define ENCODER_PULSES_PER_STEP 4
  61. #define ENCODER_STEPS_PER_MENU_ITEM 1
  62. #endif
  63. // Generic support for SSD1306 OLED based LCDs.
  64. #if ENABLED(U8GLIB_SSD1306)
  65. #define ULTRA_LCD //general LCD support, also 16x2
  66. #define DOGLCD // Support for I2C LCD 128x64 (Controller SSD1306 graphic Display Family)
  67. #endif
  68. #if ENABLED(PANEL_ONE)
  69. #define ULTIMAKERCONTROLLER
  70. #endif
  71. #if ENABLED(BQ_LCD_SMART_CONTROLLER)
  72. #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
  73. #ifndef ENCODER_PULSES_PER_STEP
  74. #define ENCODER_PULSES_PER_STEP 4
  75. #endif
  76. #ifndef ENCODER_STEPS_PER_MENU_ITEM
  77. #define ENCODER_STEPS_PER_MENU_ITEM 1
  78. #endif
  79. #ifndef LONG_FILENAME_HOST_SUPPORT
  80. #define LONG_FILENAME_HOST_SUPPORT
  81. #endif
  82. #endif
  83. #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
  84. #define DOGLCD
  85. #define U8GLIB_ST7920
  86. #define REPRAP_DISCOUNT_SMART_CONTROLLER
  87. #endif
  88. #if ENABLED(ULTIMAKERCONTROLLER) || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) || ENABLED(G3D_PANEL) || ENABLED(RIGIDBOT_PANEL)
  89. #define ULTIPANEL
  90. #define NEWPANEL
  91. #endif
  92. #if ENABLED(REPRAPWORLD_KEYPAD)
  93. #define ULTIPANEL
  94. #define NEWPANEL
  95. #endif
  96. #if ENABLED(RA_CONTROL_PANEL)
  97. #define LCD_I2C_TYPE_PCA8574
  98. #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander
  99. #define ULTIPANEL
  100. #define NEWPANEL
  101. #endif
  102. #if ENABLED(MINIPANEL)
  103. #define DOGLCD
  104. #define ULTIPANEL
  105. #define NEWPANEL
  106. #define DEFAULT_LCD_CONTRAST 17
  107. #endif
  108. /**
  109. * I2C PANELS
  110. */
  111. #if ENABLED(LCD_I2C_SAINSMART_YWROBOT)
  112. // This uses the LiquidCrystal_I2C library ( https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home )
  113. // Make sure it is placed in the Arduino libraries directory.
  114. #define LCD_I2C_TYPE_PCF8575
  115. #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander
  116. #define ULTIPANEL
  117. #define NEWPANEL
  118. #endif
  119. // PANELOLU2 LCD with status LEDs, separate encoder and click inputs
  120. #if ENABLED(LCD_I2C_PANELOLU2)
  121. #define LCD_I2C_TYPE_MCP23017
  122. #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
  123. #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD
  124. #ifndef ENCODER_PULSES_PER_STEP
  125. #define ENCODER_PULSES_PER_STEP 4
  126. #endif
  127. #ifndef ENCODER_STEPS_PER_MENU_ITEM
  128. #define ENCODER_STEPS_PER_MENU_ITEM 1
  129. #endif
  130. #if ENABLED(LCD_USE_I2C_BUZZER)
  131. #define LCD_FEEDBACK_FREQUENCY_HZ 1000
  132. #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
  133. #endif
  134. #define ULTIPANEL
  135. #define NEWPANEL
  136. #endif
  137. // Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs
  138. #if ENABLED(LCD_I2C_VIKI)
  139. // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 )
  140. // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory.
  141. // Note: The pause/stop/resume LCD button pin should be connected to the Arduino
  142. // BTN_ENC pin (or set BTN_ENC to -1 if not used)
  143. #define LCD_I2C_TYPE_MCP23017
  144. #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
  145. #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later)
  146. #define ULTIPANEL
  147. #define NEWPANEL
  148. #endif
  149. // Shift register panels
  150. // ---------------------
  151. // 2 wire Non-latching LCD SR from:
  152. // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
  153. #if ENABLED(SAV_3DLCD)
  154. #define SR_LCD_2W_NL // Non latching 2 wire shift register
  155. #define ULTIPANEL
  156. #define NEWPANEL
  157. #endif
  158. #if ENABLED(DOGLCD) // Change number of lines to match the DOG graphic display
  159. #ifndef LCD_WIDTH
  160. #define LCD_WIDTH 22
  161. #endif
  162. #ifndef LCD_HEIGHT
  163. #define LCD_HEIGHT 5
  164. #endif
  165. #endif
  166. #if ENABLED(ULTIPANEL)
  167. #define NEWPANEL //enable this if you have a click-encoder panel
  168. #define ULTRA_LCD
  169. #ifndef LCD_WIDTH
  170. #define LCD_WIDTH 20
  171. #endif
  172. #ifndef LCD_HEIGHT
  173. #define LCD_HEIGHT 4
  174. #endif
  175. #else //no panel but just LCD
  176. #if ENABLED(ULTRA_LCD)
  177. #ifndef LCD_WIDTH
  178. #define LCD_WIDTH 16
  179. #endif
  180. #ifndef LCD_HEIGHT
  181. #define LCD_HEIGHT 2
  182. #endif
  183. #endif
  184. #endif
  185. #if ENABLED(DOGLCD)
  186. /* Custom characters defined in font font_6x10_marlin_symbols */
  187. // \x00 intentionally skipped to avoid problems in strings
  188. #define LCD_STR_REFRESH "\x01"
  189. #define LCD_STR_FOLDER "\x02"
  190. #define LCD_STR_ARROW_RIGHT "\x03"
  191. #define LCD_STR_UPLEVEL "\x04"
  192. #define LCD_STR_CLOCK "\x05"
  193. #define LCD_STR_FEEDRATE "\x06"
  194. #define LCD_STR_BEDTEMP "\x07"
  195. #define LCD_STR_THERMOMETER "\x08"
  196. #define LCD_STR_DEGREE "\x09"
  197. #define LCD_STR_SPECIAL_MAX '\x09'
  198. // Maximum here is 0x1f because 0x20 is ' ' (space) and the normal charsets begin.
  199. // Better stay below 0x10 because DISPLAY_CHARSET_HD44780_WESTERN begins here.
  200. #else
  201. /* Custom characters defined in the first 8 characters of the LCD */
  202. #define LCD_STR_BEDTEMP "\x00" // this will have 'unexpected' results when used in a string!
  203. #define LCD_STR_DEGREE "\x01"
  204. #define LCD_STR_THERMOMETER "\x02"
  205. #define LCD_STR_UPLEVEL "\x03"
  206. #define LCD_STR_REFRESH "\x04"
  207. #define LCD_STR_FOLDER "\x05"
  208. #define LCD_STR_FEEDRATE "\x06"
  209. #define LCD_STR_CLOCK "\x07"
  210. #define LCD_STR_ARROW_RIGHT ">" /* from the default character set */
  211. #endif
  212. /**
  213. * Default LCD contrast for dogm-like LCD displays
  214. */
  215. #if ENABLED(DOGLCD) && DISABLED(DEFAULT_LCD_CONTRAST)
  216. #define DEFAULT_LCD_CONTRAST 32
  217. #endif
  218. #if ENABLED(DOGLCD)
  219. #define HAS_LCD_CONTRAST
  220. #if ENABLED(U8GLIB_ST7920)
  221. #undef HAS_LCD_CONTRAST
  222. #endif
  223. #if ENABLED(U8GLIB_SSD1306)
  224. #undef HAS_LCD_CONTRAST
  225. #endif
  226. #endif
  227. #else // CONFIGURATION_LCD
  228. #define CONDITIONALS_H
  229. #include "pins.h"
  230. #ifndef USBCON
  231. #define HardwareSerial_h // trick to disable the standard HWserial
  232. #endif
  233. #include "Arduino.h"
  234. /**
  235. * ENDSTOPPULLUPS
  236. */
  237. #if ENABLED(ENDSTOPPULLUPS)
  238. #if DISABLED(DISABLE_MAX_ENDSTOPS)
  239. #define ENDSTOPPULLUP_XMAX
  240. #define ENDSTOPPULLUP_YMAX
  241. #define ENDSTOPPULLUP_ZMAX
  242. #endif
  243. #if DISABLED(DISABLE_MIN_ENDSTOPS)
  244. #define ENDSTOPPULLUP_XMIN
  245. #define ENDSTOPPULLUP_YMIN
  246. #define ENDSTOPPULLUP_ZMIN
  247. #endif
  248. #if DISABLED(DISABLE_Z_MIN_PROBE_ENDSTOP)
  249. #define ENDSTOPPULLUP_ZMIN_PROBE
  250. #endif
  251. #endif
  252. /**
  253. * Axis lengths
  254. */
  255. #define X_MAX_LENGTH (X_MAX_POS - (X_MIN_POS))
  256. #define Y_MAX_LENGTH (Y_MAX_POS - (Y_MIN_POS))
  257. #define Z_MAX_LENGTH (Z_MAX_POS - (Z_MIN_POS))
  258. /**
  259. * CoreXY and CoreXZ
  260. */
  261. #if ENABLED(COREXY)
  262. #define CORE_AXIS_2 B_AXIS
  263. #define CORE_AXIS_3 Z_AXIS
  264. #elif ENABLED(COREXZ)
  265. #define CORE_AXIS_2 C_AXIS
  266. #define CORE_AXIS_3 Y_AXIS
  267. #endif
  268. /**
  269. * SCARA
  270. */
  271. #if ENABLED(SCARA)
  272. #undef SLOWDOWN
  273. #define QUICK_HOME //SCARA needs Quickhome
  274. #endif
  275. /**
  276. * AUTOSET LOCATIONS OF LIMIT SWITCHES
  277. */
  278. #if ENABLED(MANUAL_HOME_POSITIONS) // Use manual limit switch locations
  279. #define X_HOME_POS MANUAL_X_HOME_POS
  280. #define Y_HOME_POS MANUAL_Y_HOME_POS
  281. #define Z_HOME_POS MANUAL_Z_HOME_POS
  282. #else //!MANUAL_HOME_POSITIONS – Use home switch positions based on homing direction and travel limits
  283. #if ENABLED(BED_CENTER_AT_0_0)
  284. #define X_HOME_POS (X_MAX_LENGTH) * (X_HOME_DIR) * 0.5
  285. #define Y_HOME_POS (Y_MAX_LENGTH) * (Y_HOME_DIR) * 0.5
  286. #else
  287. #define X_HOME_POS (X_HOME_DIR < 0 ? X_MIN_POS : X_MAX_POS)
  288. #define Y_HOME_POS (Y_HOME_DIR < 0 ? Y_MIN_POS : Y_MAX_POS)
  289. #endif
  290. #define Z_HOME_POS (Z_HOME_DIR < 0 ? Z_MIN_POS : Z_MAX_POS)
  291. #endif //!MANUAL_HOME_POSITIONS
  292. /**
  293. * Auto Bed Leveling
  294. */
  295. #if ENABLED(AUTO_BED_LEVELING_FEATURE)
  296. // Boundaries for probing based on set limits
  297. #define MIN_PROBE_X (max(X_MIN_POS, X_MIN_POS + X_PROBE_OFFSET_FROM_EXTRUDER))
  298. #define MAX_PROBE_X (min(X_MAX_POS, X_MAX_POS + X_PROBE_OFFSET_FROM_EXTRUDER))
  299. #define MIN_PROBE_Y (max(Y_MIN_POS, Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER))
  300. #define MAX_PROBE_Y (min(Y_MAX_POS, Y_MAX_POS + Y_PROBE_OFFSET_FROM_EXTRUDER))
  301. #endif
  302. #define SERVO_LEVELING (ENABLED(AUTO_BED_LEVELING_FEATURE) && defined(Z_ENDSTOP_SERVO_NR) && Z_ENDSTOP_SERVO_NR >= 0)
  303. /**
  304. * Sled Options
  305. */
  306. #if ENABLED(Z_PROBE_SLED)
  307. #define Z_SAFE_HOMING
  308. #endif
  309. /**
  310. * Avoid double-negatives for enabling features
  311. */
  312. #if DISABLED(DISABLE_HOST_KEEPALIVE)
  313. #define HOST_KEEPALIVE_FEATURE
  314. #endif
  315. /**
  316. * MAX_STEP_FREQUENCY differs for TOSHIBA
  317. */
  318. #if ENABLED(CONFIG_STEPPERS_TOSHIBA)
  319. #define MAX_STEP_FREQUENCY 10000 // Max step frequency for Toshiba Stepper Controllers
  320. #else
  321. #define MAX_STEP_FREQUENCY 40000 // Max step frequency for Ultimaker (5000 pps / half step)
  322. #endif
  323. // MS1 MS2 Stepper Driver Microstepping mode table
  324. #define MICROSTEP1 LOW,LOW
  325. #define MICROSTEP2 HIGH,LOW
  326. #define MICROSTEP4 LOW,HIGH
  327. #define MICROSTEP8 HIGH,HIGH
  328. #define MICROSTEP16 HIGH,HIGH
  329. /**
  330. * Advance calculated values
  331. */
  332. #if ENABLED(ADVANCE)
  333. #define EXTRUSION_AREA (0.25 * (D_FILAMENT) * (D_FILAMENT) * M_PI)
  334. #define STEPS_PER_CUBIC_MM_E (axis_steps_per_unit[E_AXIS] / (EXTRUSION_AREA))
  335. #endif
  336. #if ENABLED(ULTIPANEL) && DISABLED(ELB_FULL_GRAPHIC_CONTROLLER)
  337. #undef SD_DETECT_INVERTED
  338. #endif
  339. /**
  340. * Set defaults for missing (newer) options
  341. */
  342. #ifndef DISABLE_INACTIVE_X
  343. #define DISABLE_INACTIVE_X DISABLE_X
  344. #endif
  345. #ifndef DISABLE_INACTIVE_Y
  346. #define DISABLE_INACTIVE_Y DISABLE_Y
  347. #endif
  348. #ifndef DISABLE_INACTIVE_Z
  349. #define DISABLE_INACTIVE_Z DISABLE_Z
  350. #endif
  351. #ifndef DISABLE_INACTIVE_E
  352. #define DISABLE_INACTIVE_E DISABLE_E
  353. #endif
  354. // Power Signal Control Definitions
  355. // By default use ATX definition
  356. #ifndef POWER_SUPPLY
  357. #define POWER_SUPPLY 1
  358. #endif
  359. #if (POWER_SUPPLY == 1) // 1 = ATX
  360. #define PS_ON_AWAKE LOW
  361. #define PS_ON_ASLEEP HIGH
  362. #elif (POWER_SUPPLY == 2) // 2 = X-Box 360 203W
  363. #define PS_ON_AWAKE HIGH
  364. #define PS_ON_ASLEEP LOW
  365. #endif
  366. #define HAS_POWER_SWITCH (POWER_SUPPLY > 0 && PIN_EXISTS(PS_ON))
  367. /**
  368. * Temp Sensor defines
  369. */
  370. #if TEMP_SENSOR_0 == -3
  371. #define HEATER_0_USES_MAX6675
  372. #define MAX6675_IS_MAX31855
  373. #elif TEMP_SENSOR_0 == -2
  374. #define HEATER_0_USES_MAX6675
  375. #elif TEMP_SENSOR_0 == -1
  376. #define HEATER_0_USES_AD595
  377. #elif TEMP_SENSOR_0 == 0
  378. #undef HEATER_0_MINTEMP
  379. #undef HEATER_0_MAXTEMP
  380. #elif TEMP_SENSOR_0 > 0
  381. #define THERMISTORHEATER_0 TEMP_SENSOR_0
  382. #define HEATER_0_USES_THERMISTOR
  383. #endif
  384. #if TEMP_SENSOR_1 == -1
  385. #define HEATER_1_USES_AD595
  386. #elif TEMP_SENSOR_1 == 0
  387. #undef HEATER_1_MINTEMP
  388. #undef HEATER_1_MAXTEMP
  389. #elif TEMP_SENSOR_1 > 0
  390. #define THERMISTORHEATER_1 TEMP_SENSOR_1
  391. #define HEATER_1_USES_THERMISTOR
  392. #endif
  393. #if TEMP_SENSOR_2 == -1
  394. #define HEATER_2_USES_AD595
  395. #elif TEMP_SENSOR_2 == 0
  396. #undef HEATER_2_MINTEMP
  397. #undef HEATER_2_MAXTEMP
  398. #elif TEMP_SENSOR_2 > 0
  399. #define THERMISTORHEATER_2 TEMP_SENSOR_2
  400. #define HEATER_2_USES_THERMISTOR
  401. #endif
  402. #if TEMP_SENSOR_3 == -1
  403. #define HEATER_3_USES_AD595
  404. #elif TEMP_SENSOR_3 == 0
  405. #undef HEATER_3_MINTEMP
  406. #undef HEATER_3_MAXTEMP
  407. #elif TEMP_SENSOR_3 > 0
  408. #define THERMISTORHEATER_3 TEMP_SENSOR_3
  409. #define HEATER_3_USES_THERMISTOR
  410. #endif
  411. #if TEMP_SENSOR_BED == -1
  412. #define BED_USES_AD595
  413. #elif TEMP_SENSOR_BED == 0
  414. #undef BED_MINTEMP
  415. #undef BED_MAXTEMP
  416. #elif TEMP_SENSOR_BED > 0
  417. #define THERMISTORBED TEMP_SENSOR_BED
  418. #define BED_USES_THERMISTOR
  419. #endif
  420. /**
  421. * ARRAY_BY_EXTRUDERS based on EXTRUDERS
  422. */
  423. #if EXTRUDERS > 3
  424. #define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2, v3, v4 }
  425. #elif EXTRUDERS > 2
  426. #define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2, v3 }
  427. #elif EXTRUDERS > 1
  428. #define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2 }
  429. #else
  430. #define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1 }
  431. #endif
  432. #define ARRAY_BY_EXTRUDERS1(v1) ARRAY_BY_EXTRUDERS(v1, v1, v1, v1)
  433. /**
  434. * Shorthand for pin tests, used wherever needed
  435. */
  436. #define HAS_TEMP_0 (PIN_EXISTS(TEMP_0) && TEMP_SENSOR_0 != 0 && TEMP_SENSOR_0 != -2)
  437. #define HAS_TEMP_1 (PIN_EXISTS(TEMP_1) && TEMP_SENSOR_1 != 0)
  438. #define HAS_TEMP_2 (PIN_EXISTS(TEMP_2) && TEMP_SENSOR_2 != 0)
  439. #define HAS_TEMP_3 (PIN_EXISTS(TEMP_3) && TEMP_SENSOR_3 != 0)
  440. #define HAS_TEMP_BED (PIN_EXISTS(TEMP_BED) && TEMP_SENSOR_BED != 0)
  441. #define HAS_HEATER_0 (PIN_EXISTS(HEATER_0))
  442. #define HAS_HEATER_1 (PIN_EXISTS(HEATER_1))
  443. #define HAS_HEATER_2 (PIN_EXISTS(HEATER_2))
  444. #define HAS_HEATER_3 (PIN_EXISTS(HEATER_3))
  445. #define HAS_HEATER_BED (PIN_EXISTS(HEATER_BED))
  446. #define HAS_AUTO_FAN_0 (PIN_EXISTS(EXTRUDER_0_AUTO_FAN))
  447. #define HAS_AUTO_FAN_1 (PIN_EXISTS(EXTRUDER_1_AUTO_FAN))
  448. #define HAS_AUTO_FAN_2 (PIN_EXISTS(EXTRUDER_2_AUTO_FAN))
  449. #define HAS_AUTO_FAN_3 (PIN_EXISTS(EXTRUDER_3_AUTO_FAN))
  450. #define HAS_AUTO_FAN (HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3)
  451. #define HAS_FAN0 (PIN_EXISTS(FAN))
  452. #define HAS_FAN1 (PIN_EXISTS(FAN1) && CONTROLLERFAN_PIN != FAN1_PIN && EXTRUDER_0_AUTO_FAN_PIN != FAN1_PIN && EXTRUDER_1_AUTO_FAN_PIN != FAN1_PIN && EXTRUDER_2_AUTO_FAN_PIN != FAN1_PIN)
  453. #define HAS_FAN2 (PIN_EXISTS(FAN2) && CONTROLLERFAN_PIN != FAN2_PIN && EXTRUDER_0_AUTO_FAN_PIN != FAN2_PIN && EXTRUDER_1_AUTO_FAN_PIN != FAN2_PIN && EXTRUDER_2_AUTO_FAN_PIN != FAN2_PIN)
  454. #define HAS_CONTROLLERFAN (PIN_EXISTS(CONTROLLERFAN))
  455. #define HAS_SERVOS (defined(NUM_SERVOS) && NUM_SERVOS > 0)
  456. #define HAS_SERVO_0 (PIN_EXISTS(SERVO0))
  457. #define HAS_SERVO_1 (PIN_EXISTS(SERVO1))
  458. #define HAS_SERVO_2 (PIN_EXISTS(SERVO2))
  459. #define HAS_SERVO_3 (PIN_EXISTS(SERVO3))
  460. #define HAS_FILAMENT_WIDTH_SENSOR (PIN_EXISTS(FILWIDTH))
  461. #define HAS_FILRUNOUT (PIN_EXISTS(FILRUNOUT))
  462. #define HAS_HOME (PIN_EXISTS(HOME))
  463. #define HAS_KILL (PIN_EXISTS(KILL))
  464. #define HAS_SUICIDE (PIN_EXISTS(SUICIDE))
  465. #define HAS_PHOTOGRAPH (PIN_EXISTS(PHOTOGRAPH))
  466. #define HAS_X_MIN (PIN_EXISTS(X_MIN))
  467. #define HAS_X_MAX (PIN_EXISTS(X_MAX))
  468. #define HAS_Y_MIN (PIN_EXISTS(Y_MIN))
  469. #define HAS_Y_MAX (PIN_EXISTS(Y_MAX))
  470. #define HAS_Z_MIN (PIN_EXISTS(Z_MIN))
  471. #define HAS_Z_MAX (PIN_EXISTS(Z_MAX))
  472. #define HAS_Z2_MIN (PIN_EXISTS(Z2_MIN))
  473. #define HAS_Z2_MAX (PIN_EXISTS(Z2_MAX))
  474. #define HAS_Z_PROBE (PIN_EXISTS(Z_MIN_PROBE))
  475. #define HAS_SOLENOID_1 (PIN_EXISTS(SOL1))
  476. #define HAS_SOLENOID_2 (PIN_EXISTS(SOL2))
  477. #define HAS_SOLENOID_3 (PIN_EXISTS(SOL3))
  478. #define HAS_MICROSTEPS (PIN_EXISTS(X_MS1))
  479. #define HAS_MICROSTEPS_E0 (PIN_EXISTS(E0_MS1))
  480. #define HAS_MICROSTEPS_E1 (PIN_EXISTS(E1_MS1))
  481. #define HAS_MICROSTEPS_E2 (PIN_EXISTS(E2_MS1))
  482. #define HAS_STEPPER_RESET (PIN_EXISTS(STEPPER_RESET))
  483. #define HAS_X_ENABLE (PIN_EXISTS(X_ENABLE))
  484. #define HAS_X2_ENABLE (PIN_EXISTS(X2_ENABLE))
  485. #define HAS_Y_ENABLE (PIN_EXISTS(Y_ENABLE))
  486. #define HAS_Y2_ENABLE (PIN_EXISTS(Y2_ENABLE))
  487. #define HAS_Z_ENABLE (PIN_EXISTS(Z_ENABLE))
  488. #define HAS_Z2_ENABLE (PIN_EXISTS(Z2_ENABLE))
  489. #define HAS_E0_ENABLE (PIN_EXISTS(E0_ENABLE))
  490. #define HAS_E1_ENABLE (PIN_EXISTS(E1_ENABLE))
  491. #define HAS_E2_ENABLE (PIN_EXISTS(E2_ENABLE))
  492. #define HAS_E3_ENABLE (PIN_EXISTS(E3_ENABLE))
  493. #define HAS_E4_ENABLE (PIN_EXISTS(E4_ENABLE))
  494. #define HAS_X_DIR (PIN_EXISTS(X_DIR))
  495. #define HAS_X2_DIR (PIN_EXISTS(X2_DIR))
  496. #define HAS_Y_DIR (PIN_EXISTS(Y_DIR))
  497. #define HAS_Y2_DIR (PIN_EXISTS(Y2_DIR))
  498. #define HAS_Z_DIR (PIN_EXISTS(Z_DIR))
  499. #define HAS_Z2_DIR (PIN_EXISTS(Z2_DIR))
  500. #define HAS_E0_DIR (PIN_EXISTS(E0_DIR))
  501. #define HAS_E1_DIR (PIN_EXISTS(E1_DIR))
  502. #define HAS_E2_DIR (PIN_EXISTS(E2_DIR))
  503. #define HAS_E3_DIR (PIN_EXISTS(E3_DIR))
  504. #define HAS_E4_DIR (PIN_EXISTS(E4_DIR))
  505. #define HAS_X_STEP (PIN_EXISTS(X_STEP))
  506. #define HAS_X2_STEP (PIN_EXISTS(X2_STEP))
  507. #define HAS_Y_STEP (PIN_EXISTS(Y_STEP))
  508. #define HAS_Y2_STEP (PIN_EXISTS(Y2_STEP))
  509. #define HAS_Z_STEP (PIN_EXISTS(Z_STEP))
  510. #define HAS_Z2_STEP (PIN_EXISTS(Z2_STEP))
  511. #define HAS_E0_STEP (PIN_EXISTS(E0_STEP))
  512. #define HAS_E1_STEP (PIN_EXISTS(E1_STEP))
  513. #define HAS_E2_STEP (PIN_EXISTS(E2_STEP))
  514. #define HAS_E3_STEP (PIN_EXISTS(E3_STEP))
  515. #define HAS_E4_STEP (PIN_EXISTS(E4_STEP))
  516. #define HAS_MOTOR_CURRENT_PWM (PIN_EXISTS(MOTOR_CURRENT_PWM_XY) || PIN_EXISTS(MOTOR_CURRENT_PWM_Z) || PIN_EXISTS(MOTOR_CURRENT_PWM_E))
  517. /**
  518. * Helper Macros for heaters and extruder fan
  519. */
  520. #define WRITE_HEATER_0P(v) WRITE(HEATER_0_PIN, v)
  521. #if EXTRUDERS > 1 || ENABLED(HEATERS_PARALLEL)
  522. #define WRITE_HEATER_1(v) WRITE(HEATER_1_PIN, v)
  523. #if EXTRUDERS > 2
  524. #define WRITE_HEATER_2(v) WRITE(HEATER_2_PIN, v)
  525. #if EXTRUDERS > 3
  526. #define WRITE_HEATER_3(v) WRITE(HEATER_3_PIN, v)
  527. #endif
  528. #endif
  529. #endif
  530. #if ENABLED(HEATERS_PARALLEL)
  531. #define WRITE_HEATER_0(v) { WRITE_HEATER_0P(v); WRITE_HEATER_1(v); }
  532. #else
  533. #define WRITE_HEATER_0(v) WRITE_HEATER_0P(v)
  534. #endif
  535. #if HAS_HEATER_BED
  536. #define WRITE_HEATER_BED(v) WRITE(HEATER_BED_PIN, v)
  537. #endif
  538. /**
  539. * Up to 3 PWM fans
  540. */
  541. #if HAS_FAN2
  542. #define FAN_COUNT 3
  543. #elif HAS_FAN1
  544. #define FAN_COUNT 2
  545. #elif HAS_FAN0
  546. #define FAN_COUNT 1
  547. #else
  548. #define FAN_COUNT 0
  549. #endif
  550. #if HAS_FAN0
  551. #define WRITE_FAN(v) WRITE(FAN_PIN, v)
  552. #define WRITE_FAN0(v) WRITE_FAN(v)
  553. #endif
  554. #if HAS_FAN1
  555. #define WRITE_FAN1(v) WRITE(FAN1_PIN, v)
  556. #endif
  557. #if HAS_FAN2
  558. #define WRITE_FAN2(v) WRITE(FAN2_PIN, v)
  559. #endif
  560. #define WRITE_FAN_N(n, v) WRITE_FAN##n(v)
  561. #define HAS_BUZZER (PIN_EXISTS(BEEPER) || defined(LCD_USE_I2C_BUZZER))
  562. #if defined(NUM_SERVOS) && NUM_SERVOS > 0
  563. #ifndef X_ENDSTOP_SERVO_NR
  564. #define X_ENDSTOP_SERVO_NR -1
  565. #endif
  566. #ifndef Y_ENDSTOP_SERVO_NR
  567. #define Y_ENDSTOP_SERVO_NR -1
  568. #endif
  569. #ifndef Z_ENDSTOP_SERVO_NR
  570. #define Z_ENDSTOP_SERVO_NR -1
  571. #endif
  572. #if X_ENDSTOP_SERVO_NR >= 0 || Y_ENDSTOP_SERVO_NR >= 0 || Z_ENDSTOP_SERVO_NR >= 0
  573. #define HAS_SERVO_ENDSTOPS true
  574. #define SERVO_ENDSTOP_IDS { X_ENDSTOP_SERVO_NR, Y_ENDSTOP_SERVO_NR, Z_ENDSTOP_SERVO_NR }
  575. #endif
  576. #endif
  577. #if ( (HAS_Z_MIN && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)) || HAS_Z_PROBE ) && \
  578. ( ENABLED(FIX_MOUNTED_PROBE) || defined(Z_ENDSTOP_SERVO_NR) || ENABLED(Z_PROBE_ALLEN_KEY) || ENABLED(Z_PROBE_SLED) )
  579. #define HAS_Z_MIN_PROBE
  580. #endif
  581. #endif //CONFIGURATION_LCD
  582. #endif //CONDITIONALS_H