thomas
/
marlin
Segui 1
Vota 0
Forka 0
Codice Problemi 0 Pull Requests 0 Rilasci 0 Wiki Attività
Sfoglia il codice sorgente

Add Filament Change accelerations to example configs

Scott Lahteine 7 anni fa
parent
dcb1f1f452
commit
71d3523254
45 ha cambiato i file con 1711 aggiunte e 1483 eliminazioni
Visualizzazione unificata Mostra Diff Stats
  1. 38
    33
      Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
  2. 38
    33
      Marlin/src/config/examples/Anet/A6/Configuration_adv.h
  3. 38
    33
      Marlin/src/config/examples/Anet/A8/Configuration_adv.h
  4. 38
    33
      Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
  5. 38
    33
      Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
  6. 38
    33
      Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
  7. 38
    33
      Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
  8. 38
    33
      Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
  9. 38
    33
      Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
  10. 38
    33
      Marlin/src/config/examples/Cartesio/Configuration_adv.h
  11. 38
    33
      Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
  12. 38
    32
      Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
  13. 38
    33
      Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
  14. 38
    32
      Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
  15. 38
    33
      Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
  16. 38
    33
      Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
  17. 38
    33
      Marlin/src/config/examples/Felix/Configuration_adv.h
  18. 38
    33
      Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
  19. 38
    33
      Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
  20. 38
    33
      Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
  21. 38
    33
      Marlin/src/config/examples/MakerParts/Configuration_adv.h
  22. 38
    33
      Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
  23. 38
    33
      Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
  24. 38
    33
      Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
  25. 38
    33
      Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
  26. 38
    33
      Marlin/src/config/examples/RigidBot/Configuration_adv.h
  27. 38
    33
      Marlin/src/config/examples/SCARA/Configuration_adv.h
  28. 38
    33
      Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
  29. 38
    33
      Marlin/src/config/examples/TheBorg/Configuration_adv.h
  30. 38
    33
      Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
  31. 38
    33
      Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
  32. 38
    33
      Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
  33. 38
    33
      Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
  34. 38
    33
      Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
  35. 38
    33
      Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
  36. 38
    33
      Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
  37. 38
    33
      Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
  38. 38
    33
      Marlin/src/config/examples/delta/generic/Configuration_adv.h
  39. 38
    33
      Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
  40. 38
    33
      Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
  41. 38
    33
      Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
  42. 38
    33
      Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
  43. 38
    33
      Marlin/src/config/examples/makibox/Configuration_adv.h
  44. 39
    33
      Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
  45. 38
    33
      Marlin/src/config/examples/wt150/Configuration_adv.h

+ 38
- 33
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 //#define ADVANCED_PAUSE_FEATURE
 901 
 //#define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
932 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
937 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 941 
 #endif
937
942
938 
 // @section tmc
 943 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/Anet/A6/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 //#define ADVANCED_PAUSE_FEATURE
 901 
 //#define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
932 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
937 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 941 
 #endif
937
942
938 
 // @section tmc
 943 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/Anet/A8/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 //#define ADVANCED_PAUSE_FEATURE
 901 
 //#define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
932 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
937 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 941 
 #endif
937
942
938 
 // @section tmc
 943 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 //#define ADVANCED_PAUSE_FEATURE
 901 
 //#define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
932 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
937 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 941 
 #endif
937
942
938 
 // @section tmc
 943 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 //#define ADVANCED_PAUSE_FEATURE
 901 
 //#define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
932 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
937 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 941 
 #endif
937
942
938 
 // @section tmc
 943 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 //#define ADVANCED_PAUSE_FEATURE
 901 
 //#define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
932 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
937 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 941 
 #endif
937
942
938 
 // @section tmc
 943 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 //#define ADVANCED_PAUSE_FEATURE
 901 
 //#define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
932 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
937 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 941 
 #endif
937
942
938 
 // @section tmc
 943 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 //#define ADVANCED_PAUSE_FEATURE
 901 
 //#define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
932 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
937 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 941 
 #endif
937
942
938 
 // @section tmc
 943 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 //#define ADVANCED_PAUSE_FEATURE
 901 
 //#define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
932 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
937 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 941 
 #endif
937
942
938 
 // @section tmc
 943 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/Cartesio/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 //#define ADVANCED_PAUSE_FEATURE
 901 
 //#define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 1         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  //#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
932 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            1  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  //#define FILAMENT_CHANGE_UNLOAD_LENGTH    100  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
937 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 941 
 #endif
937
942
938 
 // @section tmc
 943 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 #define ADVANCED_PAUSE_FEATURE
 901 
 #define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 4         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 420   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 8     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 120       // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 6       // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  #define PARK_HEAD_ON_PAUSE                  // Park the nozzle during pause and filament change.
932 
-  #define HOME_BEFORE_FILAMENT_CHANGE         // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            4  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      420  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   8  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT          120  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS          6  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  #define PARK_HEAD_ON_PAUSE                      // Park the nozzle during pause and filament change.
937 
+  #define HOME_BEFORE_FILAMENT_CHANGE             // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 941 
 #endif
937
942
938 
 // @section tmc
 943 
 // @section tmc

+ 38
- 32
Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 #define ADVANCED_PAUSE_FEATURE
 901 
 #define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 4         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 41  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 430   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 41    // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 430     // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 20    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 4    // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 0      // (mm) An unretract is done, then this length is purged.
925 
-
926 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
927 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 6       // Number of alert beeps to play when a response is needed.
928 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
929 
-
930 
-  #define PARK_HEAD_ON_PAUSE                  // Park the nozzle during pause and filament change.
931 
-  #define HOME_BEFORE_FILAMENT_CHANGE         // Ensure homing has been completed prior to parking for filament change
932 
-
933 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
934 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            4  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     41  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      430  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE  41  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH   430  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         20  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH       4  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         0  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS          6  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  #define PARK_HEAD_ON_PAUSE                      // Park the nozzle during pause and filament change.
937 
+  #define HOME_BEFORE_FILAMENT_CHANGE             // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
935 
 #endif
 941 
 #endif
936
942
937 
 // @section tmc
 943 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 //#define ADVANCED_PAUSE_FEATURE
 901 
 //#define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 4         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 420   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 8     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 120       // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 6       // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  #define PARK_HEAD_ON_PAUSE                  // Park the nozzle during pause and filament change.
932 
-  #define HOME_BEFORE_FILAMENT_CHANGE         // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            4  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      420  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   8  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT          120  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS          6  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  #define PARK_HEAD_ON_PAUSE                      // Park the nozzle during pause and filament change.
937 
+  #define HOME_BEFORE_FILAMENT_CHANGE             // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 941 
 #endif
937
942
938 
 // @section tmc
 943 
 // @section tmc

+ 38
- 32
Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 //#define ADVANCED_PAUSE_FEATURE
 901 
 //#define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-
926 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
927 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
928 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
929 
-
930 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
931 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
932 
-
933 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
934 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
937 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
935 
 #endif
 941 
 #endif
936
942
937 
 // @section tmc
 943 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 //#define ADVANCED_PAUSE_FEATURE
 901 
 //#define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
932 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
937 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 941 
 #endif
937
942
938 
 // @section tmc
 943 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 //#define ADVANCED_PAUSE_FEATURE
 901 
 //#define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
932 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
937 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 941 
 #endif
937
942
938 
 // @section tmc
 943 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/Felix/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 //#define ADVANCED_PAUSE_FEATURE
 901 
 //#define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
932 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
937 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 941 
 #endif
937
942
938 
 // @section tmc
 943 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 #define ADVANCED_PAUSE_FEATURE
 901 
 #define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  #define PARK_HEAD_ON_PAUSE                  // Park the nozzle during pause and filament change.
932 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  #define PARK_HEAD_ON_PAUSE                      // Park the nozzle during pause and filament change.
937 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 941 
 #endif
937
942
938 
 // @section tmc
 943 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 //#define ADVANCED_PAUSE_FEATURE
 901 
 //#define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
932 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
937 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 941 
 #endif
937
942
938 
 // @section tmc
 943 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 #define ADVANCED_PAUSE_FEATURE
 901 
 #define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 6       // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  #define PARK_HEAD_ON_PAUSE                  // Park the nozzle during pause and filament change.
932 
-  #define HOME_BEFORE_FILAMENT_CHANGE         // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS          6  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  #define PARK_HEAD_ON_PAUSE                      // Park the nozzle during pause and filament change.
937 
+  #define HOME_BEFORE_FILAMENT_CHANGE             // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 941 
 #endif
937
942
938 
 // @section tmc
 943 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/MakerParts/Configuration_adv.h Vedi File

901 
  */
 901 
  */
902 
 #define ADVANCED_PAUSE_FEATURE
 902 
 #define ADVANCED_PAUSE_FEATURE
903 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 903 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
904 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
905 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
906 
-                                              // This short retract is done immediately, before parking the nozzle.
907 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
908 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
909 
-                                              //   For Bowden, the full length of the tube and nozzle.
910 
-                                              //   For direct drive, the full length of the nozzle.
911 
-                                              //   Set to 0 for manual unloading.
912 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
913 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
914 
-                                              //   For Bowden, the full length of the tube and nozzle.
915 
-                                              //   For direct drive, the full length of the nozzle.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
917 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
918 
-                                              //   Set to 0 for manual extrusion.
919 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
920 
-                                              //   until extrusion is consistent, and to purge old filament.
921 
-
922 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
923 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
924 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
925 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
926 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
927 
-
928 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
929 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
930 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
931 
-
932 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
933 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
934 
-
935 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
936 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
904 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
905 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
906 
+                                                  // This short retract is done immediately, before parking the nozzle.
907 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
908 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
909 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
910 
+                                                  //   For Bowden, the full length of the tube and nozzle.
911 
+                                                  //   For direct drive, the full length of the nozzle.
912 
+                                                  //   Set to 0 for manual unloading.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
914 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
915 
+                                                  // 0 to disable start loading and skip to fast load only
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
918 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
919 
+                                                  //   For Bowden, the full length of the tube and nozzle.
920 
+                                                  //   For direct drive, the full length of the nozzle.
921 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
922 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
923 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
924 
+                                                  //   Set to 0 for manual extrusion.
925 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
926 
+                                                  //   until extrusion is consistent, and to purge old filament.
927 
+
928 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
929 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
930 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
931 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
932 
+
933 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
934 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
935 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
936 
+
937 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
938 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
939 
+
940 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
941 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
937 
 #endif
 942 
 #endif
938
943
939 
 // @section tmc
 944 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/Malyan/M150/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 //#define ADVANCED_PAUSE_FEATURE
 901 
 //#define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
932 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
937 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 941 
 #endif
937
942
938 
 // @section tmc
 943 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/Malyan/M200/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 //#define ADVANCED_PAUSE_FEATURE
 901 
 //#define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
932 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
937 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 941 
 #endif
937
942
938 
 // @section tmc
 943 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 //#define ADVANCED_PAUSE_FEATURE
 901 
 //#define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
932 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
937 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 941 
 #endif
937
942
938 
 // @section tmc
 943 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h Vedi File

908 
  */
 908 
  */
909 
 //#define ADVANCED_PAUSE_FEATURE
 909 
 //#define ADVANCED_PAUSE_FEATURE
910 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 910 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
911 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
912 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
913 
-                                              // This short retract is done immediately, before parking the nozzle.
914 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
915 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
916 
-                                              //   For Bowden, the full length of the tube and nozzle.
917 
-                                              //   For direct drive, the full length of the nozzle.
918 
-                                              //   Set to 0 for manual unloading.
919 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
920 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
921 
-                                              //   For Bowden, the full length of the tube and nozzle.
922 
-                                              //   For direct drive, the full length of the nozzle.
923 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
924 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
925 
-                                              //   Set to 0 for manual extrusion.
926 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
927 
-                                              //   until extrusion is consistent, and to purge old filament.
928 
-
929 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
930 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
931 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
932 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
933 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
934 
-
935 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
936 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
937 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
938 
-
939 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
940 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
941 
-
942 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
943 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
911 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
912 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
913 
+                                                  // This short retract is done immediately, before parking the nozzle.
914 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
915 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
916 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
917 
+                                                  //   For Bowden, the full length of the tube and nozzle.
918 
+                                                  //   For direct drive, the full length of the nozzle.
919 
+                                                  //   Set to 0 for manual unloading.
920 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
921 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
922 
+                                                  // 0 to disable start loading and skip to fast load only
923 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
924 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
925 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
926 
+                                                  //   For Bowden, the full length of the tube and nozzle.
927 
+                                                  //   For direct drive, the full length of the nozzle.
928 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
929 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
930 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
931 
+                                                  //   Set to 0 for manual extrusion.
932 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
933 
+                                                  //   until extrusion is consistent, and to purge old filament.
934 
+
935 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
936 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
937 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
938 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
939 
+
940 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
941 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
942 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
943 
+
944 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
945 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
946 
+
947 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
948 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
944 
 #endif
 949 
 #endif
945
950
946 
 // @section tmc
 951 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/RigidBot/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 //#define ADVANCED_PAUSE_FEATURE
 901 
 //#define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
932 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
937 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 941 
 #endif
937
942
938 
 // @section tmc
 943 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/SCARA/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 //#define ADVANCED_PAUSE_FEATURE
 901 
 //#define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
932 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
937 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 941 
 #endif
937
942
938 
 // @section tmc
 943 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/Sanguinololu/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 //#define ADVANCED_PAUSE_FEATURE
 901 
 //#define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
932 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
937 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 941 
 #endif
937
942
938 
 // @section tmc
 943 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/TheBorg/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 //#define ADVANCED_PAUSE_FEATURE
 901 
 //#define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
932 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
937 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 941 
 #endif
937
942
938 
 // @section tmc
 943 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/TinyBoy2/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 //#define ADVANCED_PAUSE_FEATURE
 901 
 //#define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
932 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
937 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 941 
 #endif
937
942
938 
 // @section tmc
 943 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 //#define ADVANCED_PAUSE_FEATURE
 901 
 //#define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
932 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
937 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 941 
 #endif
937
942
938 
 // @section tmc
 943 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h Vedi File

913 
  */
 913 
  */
914 
 //#define ADVANCED_PAUSE_FEATURE
 914 
 //#define ADVANCED_PAUSE_FEATURE
915 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 915 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
916 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
917 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
918 
-                                              // This short retract is done immediately, before parking the nozzle.
919 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
920 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
921 
-                                              //   For Bowden, the full length of the tube and nozzle.
922 
-                                              //   For direct drive, the full length of the nozzle.
923 
-                                              //   Set to 0 for manual unloading.
924 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
925 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
926 
-                                              //   For Bowden, the full length of the tube and nozzle.
927 
-                                              //   For direct drive, the full length of the nozzle.
928 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
929 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
930 
-                                              //   Set to 0 for manual extrusion.
931 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
932 
-                                              //   until extrusion is consistent, and to purge old filament.
933 
-
934 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
935 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
936 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
937 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
938 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
939 
-
940 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
941 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
942 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
943 
-
944 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
945 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
946 
-
947 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
948 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
916 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
917 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
918 
+                                                  // This short retract is done immediately, before parking the nozzle.
919 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
920 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
921 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
922 
+                                                  //   For Bowden, the full length of the tube and nozzle.
923 
+                                                  //   For direct drive, the full length of the nozzle.
924 
+                                                  //   Set to 0 for manual unloading.
925 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
926 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
927 
+                                                  // 0 to disable start loading and skip to fast load only
928 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
929 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
930 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
931 
+                                                  //   For Bowden, the full length of the tube and nozzle.
932 
+                                                  //   For direct drive, the full length of the nozzle.
933 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
934 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
935 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
936 
+                                                  //   Set to 0 for manual extrusion.
937 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
938 
+                                                  //   until extrusion is consistent, and to purge old filament.
939 
+
940 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
941 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
942 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
943 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
944 
+
945 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
946 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
947 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
948 
+
949 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
950 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
951 
+
952 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
953 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
949 
 #endif
 954 
 #endif
950
955
951 
 // @section tmc
 956 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 //#define ADVANCED_PAUSE_FEATURE
 901 
 //#define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 5         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 600   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 100   // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
932 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            5  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      600  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH        100  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
937 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 941 
 #endif
937
942
938 
 // @section tmc
 943 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h Vedi File

902 
  */
 902 
  */
903 
 #define ADVANCED_PAUSE_FEATURE
 903 
 #define ADVANCED_PAUSE_FEATURE
904 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 904 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
905 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
906 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
907 
-                                              // This short retract is done immediately, before parking the nozzle.
908 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
909 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
910 
-                                              //   For Bowden, the full length of the tube and nozzle.
911 
-                                              //   For direct drive, the full length of the nozzle.
912 
-                                              //   Set to 0 for manual unloading.
913 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
914 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
915 
-                                              //   For Bowden, the full length of the tube and nozzle.
916 
-                                              //   For direct drive, the full length of the nozzle.
917 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
918 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
919 
-                                              //   Set to 0 for manual extrusion.
920 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
921 
-                                              //   until extrusion is consistent, and to purge old filament.
922 
-
923 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
924 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
925 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
926 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
927 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
928 
-
929 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
930 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
931 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
932 
-
933 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
934 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
935 
-
936 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
937 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
905 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
906 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
907 
+                                                  // This short retract is done immediately, before parking the nozzle.
908 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
909 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
910 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
911 
+                                                  //   For Bowden, the full length of the tube and nozzle.
912 
+                                                  //   For direct drive, the full length of the nozzle.
913 
+                                                  //   Set to 0 for manual unloading.
914 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
915 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
916 
+                                                  // 0 to disable start loading and skip to fast load only
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
918 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
919 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
920 
+                                                  //   For Bowden, the full length of the tube and nozzle.
921 
+                                                  //   For direct drive, the full length of the nozzle.
922 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
923 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
924 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
925 
+                                                  //   Set to 0 for manual extrusion.
926 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
927 
+                                                  //   until extrusion is consistent, and to purge old filament.
928 
+
929 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
930 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
931 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
932 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
933 
+
934 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
935 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
936 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
937 
+
938 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
939 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
940 
+
941 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
942 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
938 
 #endif
 943 
 #endif
939
944
940 
 // @section tmc
 945 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h Vedi File

902 
  */
 902 
  */
903 
 //#define ADVANCED_PAUSE_FEATURE
 903 
 //#define ADVANCED_PAUSE_FEATURE
904 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 904 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
905 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
906 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
907 
-                                              // This short retract is done immediately, before parking the nozzle.
908 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
909 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
910 
-                                              //   For Bowden, the full length of the tube and nozzle.
911 
-                                              //   For direct drive, the full length of the nozzle.
912 
-                                              //   Set to 0 for manual unloading.
913 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
914 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
915 
-                                              //   For Bowden, the full length of the tube and nozzle.
916 
-                                              //   For direct drive, the full length of the nozzle.
917 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
918 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
919 
-                                              //   Set to 0 for manual extrusion.
920 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
921 
-                                              //   until extrusion is consistent, and to purge old filament.
922 
-
923 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
924 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
925 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
926 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
927 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
928 
-
929 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
930 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
931 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
932 
-
933 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
934 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
935 
-
936 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
937 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
905 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
906 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
907 
+                                                  // This short retract is done immediately, before parking the nozzle.
908 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
909 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
910 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
911 
+                                                  //   For Bowden, the full length of the tube and nozzle.
912 
+                                                  //   For direct drive, the full length of the nozzle.
913 
+                                                  //   Set to 0 for manual unloading.
914 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
915 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
916 
+                                                  // 0 to disable start loading and skip to fast load only
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
918 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
919 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
920 
+                                                  //   For Bowden, the full length of the tube and nozzle.
921 
+                                                  //   For direct drive, the full length of the nozzle.
922 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
923 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
924 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
925 
+                                                  //   Set to 0 for manual extrusion.
926 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
927 
+                                                  //   until extrusion is consistent, and to purge old filament.
928 
+
929 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
930 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
931 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
932 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
933 
+
934 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
935 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
936 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
937 
+
938 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
939 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
940 
+
941 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
942 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
938 
 #endif
 943 
 #endif
939
944
940 
 // @section tmc
 945 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h Vedi File

902 
  */
 902 
  */
903 
 //#define ADVANCED_PAUSE_FEATURE
 903 
 //#define ADVANCED_PAUSE_FEATURE
904 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 904 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
905 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
906 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
907 
-                                              // This short retract is done immediately, before parking the nozzle.
908 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
909 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
910 
-                                              //   For Bowden, the full length of the tube and nozzle.
911 
-                                              //   For direct drive, the full length of the nozzle.
912 
-                                              //   Set to 0 for manual unloading.
913 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
914 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
915 
-                                              //   For Bowden, the full length of the tube and nozzle.
916 
-                                              //   For direct drive, the full length of the nozzle.
917 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
918 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
919 
-                                              //   Set to 0 for manual extrusion.
920 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
921 
-                                              //   until extrusion is consistent, and to purge old filament.
922 
-
923 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
924 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
925 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
926 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
927 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
928 
-
929 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
930 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
931 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
932 
-
933 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
934 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
935 
-
936 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
937 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
905 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
906 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
907 
+                                                  // This short retract is done immediately, before parking the nozzle.
908 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
909 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
910 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
911 
+                                                  //   For Bowden, the full length of the tube and nozzle.
912 
+                                                  //   For direct drive, the full length of the nozzle.
913 
+                                                  //   Set to 0 for manual unloading.
914 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
915 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
916 
+                                                  // 0 to disable start loading and skip to fast load only
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
918 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
919 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
920 
+                                                  //   For Bowden, the full length of the tube and nozzle.
921 
+                                                  //   For direct drive, the full length of the nozzle.
922 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
923 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
924 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
925 
+                                                  //   Set to 0 for manual extrusion.
926 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
927 
+                                                  //   until extrusion is consistent, and to purge old filament.
928 
+
929 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
930 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
931 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
932 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
933 
+
934 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
935 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
936 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
937 
+
938 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
939 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
940 
+
941 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
942 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
938 
 #endif
 943 
 #endif
939
944
940 
 // @section tmc
 945 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h Vedi File

902 
  */
 902 
  */
903 
 //#define ADVANCED_PAUSE_FEATURE
 903 
 //#define ADVANCED_PAUSE_FEATURE
904 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 904 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
905 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
906 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
907 
-                                              // This short retract is done immediately, before parking the nozzle.
908 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
909 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
910 
-                                              //   For Bowden, the full length of the tube and nozzle.
911 
-                                              //   For direct drive, the full length of the nozzle.
912 
-                                              //   Set to 0 for manual unloading.
913 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
914 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
915 
-                                              //   For Bowden, the full length of the tube and nozzle.
916 
-                                              //   For direct drive, the full length of the nozzle.
917 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
918 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
919 
-                                              //   Set to 0 for manual extrusion.
920 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
921 
-                                              //   until extrusion is consistent, and to purge old filament.
922 
-
923 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
924 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
925 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
926 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
927 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
928 
-
929 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
930 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
931 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
932 
-
933 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
934 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
935 
-
936 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
937 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
905 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
906 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
907 
+                                                  // This short retract is done immediately, before parking the nozzle.
908 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
909 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
910 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
911 
+                                                  //   For Bowden, the full length of the tube and nozzle.
912 
+                                                  //   For direct drive, the full length of the nozzle.
913 
+                                                  //   Set to 0 for manual unloading.
914 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
915 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
916 
+                                                  // 0 to disable start loading and skip to fast load only
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
918 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
919 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
920 
+                                                  //   For Bowden, the full length of the tube and nozzle.
921 
+                                                  //   For direct drive, the full length of the nozzle.
922 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
923 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
924 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
925 
+                                                  //   Set to 0 for manual extrusion.
926 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
927 
+                                                  //   until extrusion is consistent, and to purge old filament.
928 
+
929 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
930 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
931 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
932 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
933 
+
934 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
935 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
936 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
937 
+
938 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
939 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
940 
+
941 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
942 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
938 
 #endif
 943 
 #endif
939
944
940 
 // @section tmc
 945 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/delta/generic/Configuration_adv.h Vedi File

902 
  */
 902 
  */
903 
 //#define ADVANCED_PAUSE_FEATURE
 903 
 //#define ADVANCED_PAUSE_FEATURE
904 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 904 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
905 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
906 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
907 
-                                              // This short retract is done immediately, before parking the nozzle.
908 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
909 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
910 
-                                              //   For Bowden, the full length of the tube and nozzle.
911 
-                                              //   For direct drive, the full length of the nozzle.
912 
-                                              //   Set to 0 for manual unloading.
913 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
914 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
915 
-                                              //   For Bowden, the full length of the tube and nozzle.
916 
-                                              //   For direct drive, the full length of the nozzle.
917 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
918 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
919 
-                                              //   Set to 0 for manual extrusion.
920 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
921 
-                                              //   until extrusion is consistent, and to purge old filament.
922 
-
923 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
924 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
925 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
926 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
927 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
928 
-
929 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
930 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
931 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
932 
-
933 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
934 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
935 
-
936 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
937 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
905 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
906 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
907 
+                                                  // This short retract is done immediately, before parking the nozzle.
908 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
909 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
910 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
911 
+                                                  //   For Bowden, the full length of the tube and nozzle.
912 
+                                                  //   For direct drive, the full length of the nozzle.
913 
+                                                  //   Set to 0 for manual unloading.
914 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
915 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
916 
+                                                  // 0 to disable start loading and skip to fast load only
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
918 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
919 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
920 
+                                                  //   For Bowden, the full length of the tube and nozzle.
921 
+                                                  //   For direct drive, the full length of the nozzle.
922 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
923 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
924 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
925 
+                                                  //   Set to 0 for manual extrusion.
926 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
927 
+                                                  //   until extrusion is consistent, and to purge old filament.
928 
+
929 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
930 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
931 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
932 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
933 
+
934 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
935 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
936 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
937 
+
938 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
939 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
940 
+
941 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
942 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
938 
 #endif
 943 
 #endif
939
944
940 
 // @section tmc
 945 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h Vedi File

902 
  */
 902 
  */
903 
 //#define ADVANCED_PAUSE_FEATURE
 903 
 //#define ADVANCED_PAUSE_FEATURE
904 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 904 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
905 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
906 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
907 
-                                              // This short retract is done immediately, before parking the nozzle.
908 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
909 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
910 
-                                              //   For Bowden, the full length of the tube and nozzle.
911 
-                                              //   For direct drive, the full length of the nozzle.
912 
-                                              //   Set to 0 for manual unloading.
913 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
914 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
915 
-                                              //   For Bowden, the full length of the tube and nozzle.
916 
-                                              //   For direct drive, the full length of the nozzle.
917 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
918 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
919 
-                                              //   Set to 0 for manual extrusion.
920 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
921 
-                                              //   until extrusion is consistent, and to purge old filament.
922 
-
923 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
924 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
925 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
926 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
927 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
928 
-
929 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
930 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
931 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
932 
-
933 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
934 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
935 
-
936 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
937 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
905 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
906 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
907 
+                                                  // This short retract is done immediately, before parking the nozzle.
908 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
909 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
910 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
911 
+                                                  //   For Bowden, the full length of the tube and nozzle.
912 
+                                                  //   For direct drive, the full length of the nozzle.
913 
+                                                  //   Set to 0 for manual unloading.
914 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
915 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
916 
+                                                  // 0 to disable start loading and skip to fast load only
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
918 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
919 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
920 
+                                                  //   For Bowden, the full length of the tube and nozzle.
921 
+                                                  //   For direct drive, the full length of the nozzle.
922 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
923 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
924 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
925 
+                                                  //   Set to 0 for manual extrusion.
926 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
927 
+                                                  //   until extrusion is consistent, and to purge old filament.
928 
+
929 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
930 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
931 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
932 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
933 
+
934 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
935 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
936 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
937 
+
938 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
939 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
940 
+
941 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
942 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
938 
 #endif
 943 
 #endif
939
944
940 
 // @section tmc
 945 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h Vedi File

907 
  */
 907 
  */
908 
 //#define ADVANCED_PAUSE_FEATURE
 908 
 //#define ADVANCED_PAUSE_FEATURE
909 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 909 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
910 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
911 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
912 
-                                              // This short retract is done immediately, before parking the nozzle.
913 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
914 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
915 
-                                              //   For Bowden, the full length of the tube and nozzle.
916 
-                                              //   For direct drive, the full length of the nozzle.
917 
-                                              //   Set to 0 for manual unloading.
918 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
919 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
920 
-                                              //   For Bowden, the full length of the tube and nozzle.
921 
-                                              //   For direct drive, the full length of the nozzle.
922 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
923 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
924 
-                                              //   Set to 0 for manual extrusion.
925 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
926 
-                                              //   until extrusion is consistent, and to purge old filament.
927 
-
928 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
929 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
930 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
931 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
932 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
933 
-
934 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
935 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
936 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
937 
-
938 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
939 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
940 
-
941 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
942 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
910 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
911 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
912 
+                                                  // This short retract is done immediately, before parking the nozzle.
913 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
914 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
915 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
916 
+                                                  //   For Bowden, the full length of the tube and nozzle.
917 
+                                                  //   For direct drive, the full length of the nozzle.
918 
+                                                  //   Set to 0 for manual unloading.
919 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
920 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
921 
+                                                  // 0 to disable start loading and skip to fast load only
922 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
923 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
924 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
925 
+                                                  //   For Bowden, the full length of the tube and nozzle.
926 
+                                                  //   For direct drive, the full length of the nozzle.
927 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
928 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
929 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
930 
+                                                  //   Set to 0 for manual extrusion.
931 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
932 
+                                                  //   until extrusion is consistent, and to purge old filament.
933 
+
934 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
935 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
936 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
937 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
938 
+
939 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
940 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
941 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
942 
+
943 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
944 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
945 
+
946 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
947 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
943 
 #endif
 948 
 #endif
944
949
945 
 // @section tmc
 950 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h Vedi File

902 
  */
 902 
  */
903 
 //#define ADVANCED_PAUSE_FEATURE
 903 
 //#define ADVANCED_PAUSE_FEATURE
904 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 904 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
905 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
906 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
907 
-                                              // This short retract is done immediately, before parking the nozzle.
908 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
909 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
910 
-                                              //   For Bowden, the full length of the tube and nozzle.
911 
-                                              //   For direct drive, the full length of the nozzle.
912 
-                                              //   Set to 0 for manual unloading.
913 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
914 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
915 
-                                              //   For Bowden, the full length of the tube and nozzle.
916 
-                                              //   For direct drive, the full length of the nozzle.
917 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
918 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
919 
-                                              //   Set to 0 for manual extrusion.
920 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
921 
-                                              //   until extrusion is consistent, and to purge old filament.
922 
-
923 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
924 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
925 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
926 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
927 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
928 
-
929 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
930 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
931 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
932 
-
933 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
934 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
935 
-
936 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
937 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
905 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
906 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
907 
+                                                  // This short retract is done immediately, before parking the nozzle.
908 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
909 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
910 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
911 
+                                                  //   For Bowden, the full length of the tube and nozzle.
912 
+                                                  //   For direct drive, the full length of the nozzle.
913 
+                                                  //   Set to 0 for manual unloading.
914 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
915 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
916 
+                                                  // 0 to disable start loading and skip to fast load only
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
918 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
919 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
920 
+                                                  //   For Bowden, the full length of the tube and nozzle.
921 
+                                                  //   For direct drive, the full length of the nozzle.
922 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
923 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
924 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
925 
+                                                  //   Set to 0 for manual extrusion.
926 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
927 
+                                                  //   until extrusion is consistent, and to purge old filament.
928 
+
929 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
930 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
931 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
932 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
933 
+
934 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
935 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
936 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
937 
+
938 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
939 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
940 
+
941 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
942 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
938 
 #endif
 943 
 #endif
939
944
940 
 // @section tmc
 945 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 #define ADVANCED_PAUSE_FEATURE
 901 
 #define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  #define PARK_HEAD_ON_PAUSE                  // Park the nozzle during pause and filament change.
932 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  #define PARK_HEAD_ON_PAUSE                      // Park the nozzle during pause and filament change.
937 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 941 
 #endif
937
942
938 
 // @section tmc
 943 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/makibox/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 //#define ADVANCED_PAUSE_FEATURE
 901 
 //#define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
932 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
922 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
923 
+                                                  //   Set to 0 for manual extrusion.
924 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
925 
+                                                  //   until extrusion is consistent, and to purge old filament.
926 
+
927 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
928 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
929 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
930 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
931 
+
932 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
933 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
934 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
935 
+
936 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
937 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
938 
+
939 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
940 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 941 
 #endif
937
942
938 
 // @section tmc
 943 
 // @section tmc

+ 39
- 33
Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h Vedi File

900 
  */
 900 
  */
901 
 //#define ADVANCED_PAUSE_FEATURE
 901 
 //#define ADVANCED_PAUSE_FEATURE
902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 902 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
903 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
904 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
905 
-                                              // This short retract is done immediately, before parking the nozzle.
906 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
908 
-                                              //   For Bowden, the full length of the tube and nozzle.
909 
-                                              //   For direct drive, the full length of the nozzle.
910 
-                                              //   Set to 0 for manual unloading.
911 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
912 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
913 
-                                              //   For Bowden, the full length of the tube and nozzle.
914 
-                                              //   For direct drive, the full length of the nozzle.
915 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
917 
-                                              //   Set to 0 for manual extrusion.
918 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
919 
-                                              //   until extrusion is consistent, and to purge old filament.
920 
-
921 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
922 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
923 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
924 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
925 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
926 
-
927 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
928 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
929 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
930 
-
931 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
932 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
933 
-
934 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
935 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
903 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
904 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
905 
+                                                  // This short retract is done immediately, before parking the nozzle.
906 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
907 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
908 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
909 
+                                                  //   For Bowden, the full length of the tube and nozzle.
910 
+                                                  //   For direct drive, the full length of the nozzle.
911 
+                                                  //   Set to 0 for manual unloading.
912 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
914 
+                                                  // 0 to disable start loading and skip to fast load only
915 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
918 
+                                                  //   For Bowden, the full length of the tube and nozzle.
919 
+                                                  //   For direct drive, the full length of the nozzle.
920 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
921 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
922 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
923 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
924 
+                                                  //   Set to 0 for manual extrusion.
925 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
926 
+                                                  //   until extrusion is consistent, and to purge old filament.
927 
+
928 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
929 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
930 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
931 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
932 
+
933 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
934 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
935 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
936 
+
937 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
938 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
939 
+
940 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
941 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
936 
 #endif
 942 
 #endif
937
943
938 
 // @section tmc
 944 
 // @section tmc

+ 38
- 33
Marlin/src/config/examples/wt150/Configuration_adv.h Vedi File

901 
  */
 901 
  */
902 
 //#define ADVANCED_PAUSE_FEATURE
 902 
 //#define ADVANCED_PAUSE_FEATURE
903 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
 903 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
904 
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // (mm/s) Initial retract feedrate.
905 
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // (mm) Initial retract.
906 
-                                              // This short retract is done immediately, before parking the nozzle.
907 
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // (mm/s) Unload filament feedrate. This can be pretty fast.
908 
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // (mm) The length of filament for a complete unload.
909 
-                                              //   For Bowden, the full length of the tube and nozzle.
910 
-                                              //   For direct drive, the full length of the nozzle.
911 
-                                              //   Set to 0 for manual unloading.
912 
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // (mm/s) Load filament feedrate. This can be pretty fast.
913 
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // (mm) Load length of filament, from extruder gear to nozzle.
914 
-                                              //   For Bowden, the full length of the tube and nozzle.
915 
-                                              //   For direct drive, the full length of the nozzle.
916 
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
917 
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // (mm) Length to extrude after loading.
918 
-                                              //   Set to 0 for manual extrusion.
919 
-                                              //   Filament can be extruded repeatedly from the Filament Change menu
920 
-                                              //   until extrusion is consistent, and to purge old filament.
921 
-
922 
-                                              // Filament Unload does a Retract, Delay, and Purge first:
923 
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH 13   // (mm) Unload initial retract length.
924 
-  #define FILAMENT_UNLOAD_DELAY 5000          // (ms) Delay for the filament to cool after retract.
925 
-  #define FILAMENT_UNLOAD_PURGE_LENGTH 8      // (mm) An unretract is done, then this length is purged.
926 
-  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE   // Purge continuously up to the purge length until interrupted.
927 
-
928 
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // (seconds) Time limit before the nozzle is turned off for safety.
929 
-  #define FILAMENT_CHANGE_ALERT_BEEPS 10      // Number of alert beeps to play when a response is needed.
930 
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable for XYZ steppers to stay powered on during filament change.
931 
-
932 
-  //#define PARK_HEAD_ON_PAUSE                // Park the nozzle during pause and filament change.
933 
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
934 
-
935 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES       // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
936 
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS     // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
904 
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
905 
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
906 
+                                                  // This short retract is done immediately, before parking the nozzle.
907 
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
908 
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
909 
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
910 
+                                                  //   For Bowden, the full length of the tube and nozzle.
911 
+                                                  //   For direct drive, the full length of the nozzle.
912 
+                                                  //   Set to 0 for manual unloading.
913 
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
914 
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
915 
+                                                  // 0 to disable start loading and skip to fast load only
916 
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
917 
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
918 
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
919 
+                                                  //   For Bowden, the full length of the tube and nozzle.
920 
+                                                  //   For direct drive, the full length of the nozzle.
921 
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
922 
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
923 
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
924 
+                                                  //   Set to 0 for manual extrusion.
925 
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
926 
+                                                  //   until extrusion is consistent, and to purge old filament.
927 
+
928 
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
929 
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
930 
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
931 
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
932 
+
933 
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
934 
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
935 
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
936 
+
937 
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
938 
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
939 
+
940 
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
941 
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
937 
 #endif
 942 
 #endif
938
943
939 
 // @section tmc
 944 
 // @section tmc

Write Preview
Loading…
Annulla
Salva