201 Revize (02dee80fa58cd35efb95e89e98320c0a5efb4580)

Autor SHA1 Zpráva Datum
  lajos 02dee80fa5 added Azteeg X1 motherboard před 12 roky
  Erik van der Zalm e34c9981ab Delta disabled by default před 12 roky
  Erik van der Zalm ff6fa09ecf Moved corexy implementation from stepper to planner před 12 roky
  Erik van der Zalm c8dcc7c208 Allow increasing the software PWM frequency. před 12 roky
  BorisLandoni c1cb5977ee Update Configuration.h před 12 roky
  BorisLandoni 8a5bd8a808 Update Configuration.h před 12 roky
  BorisLandoni 6588933c04 Update Configuration.h před 12 roky
  Scott Lahteine 5dabc95409 Apply all changes from latest Marlin_V1 před 12 roky
  Gord Christmas f4f30c9d64 Added servo actuated enstop coding to allow G28 command to engage and retract a servo to specified angles. před 12 roky
  Erik van der Zalm 5090c56651 More redundant temp sensor changes. (After testing and debugging by reifsnderb) před 12 roky
  Gatulibu b78fa6bb70 Added support for Megatronics v2.0 and Minitronics v1.0 před 12 roky
  Erik van der Zalm 9be61cdc02 Added redundant temp sensor před 12 roky
  Alexander Kasimir e2ff536b03 Fixed typo in Comment před 12 roky
  Gord Christmas 28ada096e2 Adding servo documentation před 12 roky
  Gord Christmas dc59f07d24 First attempt at refactoring of original servo code. Only adding servo support as a start to keep things simple. před 12 roky
  Erik van der Zalm bd2cd4903e Added #ifdef BARICUDA around the BariCUDA changes před 12 roky
  gregor 2739c26c4f changes: před 12 roky
  gregor 6fb9573157 added support for the reprapworld keypad před 12 roky
  Tim Anderson 1fa61c297e Turning off Control Panel by Default and Updating the link to the LiquidCrystal_I2C library to avoid confusion. před 12 roky
  kiyoshigawa b27a59f41e Added support for Elefu RA Board and Elefu Control Panel před 12 roky
  Scott Lahteine 0ef54f2f85 Make M303 silent when "S0" is sent před 12 roky
  Scott Lahteine a200521eab Added CUSTOM_MENDEL_NAME option to Configuration.h and language.h před 12 roky
  Martin Renold 1a397825f9 fix DEFAULT_AXIS_STEPS_PER_UNIT minor Z rounding error před 12 roky
  Lukasz Stefanowicz d71f1e9bf6 Add (as an option) slower SD transfer mode před 12 roky
  MaikStohn 13596e8722 Added RepRapDiscount FULL GRAPHIC Smart Controller před 12 roky
  daid303 c80a78bb70 Lower the default max E feedrate a bit. With the stepper fix this is much to high. před 12 roky
  ErikZalm 7a5c474d91 Update Configuration.h před 12 roky
  Robert F-C 9322c408c6 Updated for LiquidTWI2 library version 1.2.3 před 12 roky
  whosawhatsis fd5b7e0cec Separate PID_MAX from BANG_MAX před 12 roky
  blddk 72419f69a9 Added rumba před 12 roky
  Dirk Eichel 5de25ccd20 Add Motherboard variant 64 - STB V1.1 před 12 roky
  Robert F-C 7bad72359c Support encoder click on PANELOLU2 being read through I2C před 12 roky
  Robert F-C 1daf2f3256 Number of extruders is not an advanced configuration - it is a basic property. před 12 roky
  Dirk Eichel b2c1c64fb1 Add Motherboard variant 64 - STB V1.1 před 12 roky
  Robert F-C 6beb42cdf6 Attempt to address Bernhard's comments před 12 roky
  Robert F-C 839bef6d5d Fix Configuration.h file to not define LCDs be default. před 12 roky
  Robert F-C 1292d735ba Converge all I2C LCD branches (PANELOLU2, VIKI & PCF8575) před 12 roky
  MendelMax 67710df9f3 Made i2c mode wok with the hardware I am able to test (ywrobot / sainsmart i2c LCD 2004) před 12 roky
  Bob Clough 2b567d1df5 Added I2C port expander support to HD44780 před 12 roky
  Bob Clough 06272f463d Added Config variables for activating I2C LCDs and setting type and address před 12 roky
  Denis B 70871715e4 Added support for extruder offset handling před 12 roky
  Daniele Sdei 3cf59f6f9a add RepRapPro Huxley thermistor tables před 12 roky
  daid303 bbe7d3d0fe Fixed #312 před 12 roky
  daid303 8b88e3b386 Fixed #345, Fixed #267. před 12 roky
  Nicolas Rossi f3c1fc70a9 Power signal control definitions for ATX and others před 12 roky
  Erik vd Zalm 6752cb2d9c PID now per extruder. Fixed typo před 12 roky
  Erik vd Zalm 0ac452e252 Disable is now multi extruder compatible. M84 got a T option. před 12 roky
  Johann Rocholl 9e7b5056a0 {X,Y,Z}_{MIN,MAX}_POS are actually in Gcode coordinates. před 12 roky
  Johann Rocholl 1c2ecddae4 Fix typo (# missing before define). před 12 roky
  daid303 55ba90ac19 Add PID functional range setting. With high powered heaters the current functional range of 10 degrees causes high overshoots as the PID needs to kick in before the temperature hits 10 degrees below target. před 12 roky