thomas
/
marlin
Следить 1
В избранное 0
Форкнуть 0
Код Задачи 0 Pull Request'ы 0 Релизы 0 Вики Активность
684 коммитов
4 веток
Дерево: 047d037f8c
веток Теги
${ item.name }
Создать ветку ${ searchTerm }
из '047d037f8c'
${ noResults }
Граф коммитов

619 Коммиты (047d037f8cc67b81ff239e633914045fba00f027)

Автор SHA1 Сообщение Дата
  daid303 047d037f8c #ifdef fix for #326 12 лет назад
  daid303 f30b46b2a8 One more fix for #338, I really should get a heated bed to test with. 12 лет назад
  daid303 65c3f1ffcd Most likely fixing #338 12 лет назад
  daid303 7577717b59 Fixed #336 12 лет назад
  daid303 1a8f54cea1 The big LCD code update. This splits the display and menu implementation. Paving the way for future different displays. It also makes it easier to modify the menu structures while keeping everything consistant. Note that this most likely breaks the translations, which need to be updated. 12 лет назад
  daid303 6731c094ee Fix compiling with just an 16x2 LCD and no buttons. 12 лет назад
  daid303 b99a928a80 Fix the M117 (display message on LCD) when used over USB with checksums. 12 лет назад
  daid303 55ba90ac19 Add PID functional range setting. With high powered heaters the current functional range of 10 degrees causes high overshoots as the PID needs to kick in before the temperature hits 10 degrees below target. 12 лет назад
  daid303 5ff5cee8ce Fix the sensitive pin definitions, there where analogue numbers in the digital pin list. Also made M42 without a P function on the LED_PIN (which was otherwise a useless pin definition) 12 лет назад
  Johann Rocholl ca409e5531 Fix X/Y/Z_MIN_PIN for Printrboard. 12 лет назад
  Johann Rocholl 1f45cb0a51 Fix typo in MANUAL_HOME_POSITION (plural S missing) and improve comments. 12 лет назад
  daid303 46ec4b648c Added some missing Mxxx comments to M commands. Fixed the unsetting of the timer dividers for the fast PWM fan. 12 лет назад
  Daid 724f5aa36b Update on makefile for moved Arduino addons. 12 лет назад
  daid303 6d9dfa96c3 Move the Arduino related stuff out of the Marlin tree, as they are not directly related to Marlin functionality but addons for the Arduino IDE. Also split up the addons for pre 1.0.0 Arduino and post 1.0.0 Arduino. 12 лет назад
  daid303 3fb07d9b8d Add MINTEMP/MAXTEMP error to LCD, and fix temperature bug with more then 1 extruder. 12 лет назад
  daid303 82c8724b33 Fix compile with PID_DEBUG 12 лет назад
  daid303 e036750bdf Use the disable macros on initialization. Which fixes a bug when there is no pin defined for stepper enabled (motherboard 4) 12 лет назад
  Daid 32d4373e0f Add printrboard and brainwave to Makefile. 12 лет назад
  Daid 29435dfb4b Proper avr for Sanguino in Makefile. 12 лет назад
  daid303 52158dffcc Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same. 12 лет назад
  Daid ca7acbe6d9 Allow specification of which arduino hardware subvariant in Makefile. 12 лет назад
  Johann Rocholl 33247733e0 Teensylu and Printrboard use different analog pins for thermistors. 12 лет назад
  Johann Rocholl 621c24a10f AT90USB is only defined after pins.h is included. 12 лет назад
  Johann Rocholl 6cba11f087 Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well. 12 лет назад
  Johann Rocholl 4d351b4846 Improved formatting and comments for consistency. 12 лет назад
  Johann Rocholl a30007caa4 If fastio.h is not messed up then Teensylu and Printrboard are actually using the same pins. 12 лет назад
  Johann Rocholl 6aa87a7b67 Use the same fastio.h definition for AT90USB1286/7 and AT90USB646/7. 12 лет назад
  Johann Rocholl b1c38d4c82 Avoid compiler warnings (redefined MOTHERBOARD) in Arduino 1.0 and greater. 12 лет назад
  Johann Rocholl 42e21bb06e Add support for Printrboard (from https://github.com/lincomatic/Marlin) and Brainwave (from https://github.com/metrix/Sprinter). 12 лет назад
  Johann Rocholl ce4b5bbeaa Add AT90USB646 support from Sprinter to fastio.h. 12 лет назад
  Daid f413aa33b3 Small makefile change, posibility to add defines on the commandline, and fix compiling with watchdog enabled when using the Makefile. 12 лет назад
  daid303 587154c01b Fix the WATCHPERIOD implementation. It did not work correctly in a multi extruder setup, it did not work after 32 seconds after startup (int16 used as millies timestamp). And it did not work if you gave an M104 or M109 when the target was already around the target setpoint. So on average, it did not work at all. The new implementation should be robust in detecting a failure to heat up. 12 лет назад
  daid303 1f27870d41 Fix compiling the watchdog error message when the manual reset watchdog is used. 12 лет назад
  daid303 c5d4225804 Mistake there, not sure why I did that. My bad. 12 лет назад
  daid303 529748894c Minor changes in the temperature code for some cleanup. 12 лет назад
  daid303 4e26ecc940 The Partial release message (which does not really tell you anything) overwrites the final print time on the LCD, which is a real shame. So I removed the message. 12 лет назад
  daid303 c421774422 The Partial release message (which does not really tell you anything) overwrites the final print time on the LCD, which is a real shame. So I removed the message. 12 лет назад
  daid303 16078e47d4 Fixed #325 12 лет назад
  daid303 6a9bee27cc Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup. 12 лет назад
  daid303 94ea26ff46 Some minor changes on code style. And a bugfix where the counters for positioning in the stepper where wrong depending on compiler settings. (Caused strange values to reported back with M114 and endstop triggers). Also fixed compiling with FWRETRACT enabled. 12 лет назад
  daid303 6c51fe5039 Fix the bug where the SD percentage calculation is wrong when the file is larger then 42MB 12 лет назад
  brupje 57429cb9fe Fix for keypad 12 лет назад
  daid303 97fa2a9c30 Few simple fixes that save RAM, as static strings are stored in RAM by default. 12 лет назад
  Daid c94ca24adc Fixed #317 13 лет назад
  Daid 99e9554edd Some fixes in the Makefile to support Arduino 1.0.0 or higher and added the Rambo. Still needs some more work for the different arduino hardware variants. 13 лет назад
  Erik vd Zalm dbbf050005 More rambo fixes 13 лет назад
  Erik vd Zalm e48dfcc2b3 Tmp copy before merge 13 лет назад
  Erik vd Zalm b98fb17fe9 Small FREQUENCY_LIMIT changes 13 лет назад
  Gege 9b1d2483a0 I hope last changes to french translation 13 лет назад
  Gege b1adc567da Correction to french translation (non-ASCII chars only) 13 лет назад