marlin

Commit Graph

Аутор	SHA1	Порука	Датум
Scott Lahteine	447dbd6fa5	Add STEPPER_RESET_PIN support	пре 10 година
Scott Lahteine	a0351bdb73	Remove STEPPER_RESET_FIX option	пре 10 година
Scott Lahteine	6b1b8cb2b3	Also nullify spaces before the checksum asterisk (PR#2409)	пре 10 година
Scott Lahteine	8e61314323	Use RIGIDBOT_PANEL for consistency with online docs	пре 10 година
Scott Lahteine	4b204da3c1	Cleanup of pins_RAMPS_13.h	пре 10 година
Scott Lahteine	536f86e896	RigidBot CONTROLLERFAN_PIN in Configuration_adv.h	пре 10 година
Scott Lahteine	f068e46661	RigidBoard include for pins.h	пре 10 година
Scott Lahteine	9ebcae496d	RIGIDBOARD / RIGIDPANEL	пре 10 година
Scott Lahteine	c3c605c658	Move note about LiquidTWI2 to Configuration.h (PR#2406)	пре 10 година
Scott Lahteine	4e9d658141	Prevent a hanging SERIAL_ECHO_START in M111	пре 10 година
Scott Lahteine	bc0fdbe88e	Use SERIAL_EOL in SERIAL_PROTOCOLLN macros	пре 10 година
Scott Lahteine	d78ebbc0e9	Remove unused MSG_OK_B and MSG_OK_T	пре 10 година
Scott Lahteine	6b494c1535	Use disable_all_heaters in M111	пре 10 година
Scott Lahteine	15190d40df	Add extra EOL after M111	пре 10 година
AnHardt	0e1cf78f5c	Remove code for testing if probing range is too small (PR#2390) becaue it is over-restrictive and superseeded by the now working tests if the probe-recktangle can be reached. See iss#2366	пре 10 година
AnHardt	d421f5250d	Correct the sign of zprobe_zoffset for G29 (PR#@391) Sign flipped with #2167. See also comments https://github.com/MarlinFirmware/Marlin/issues/2040#issuecomment-118568355 and following.	пре 10 година
Scott Lahteine	52fcc743ab	Replace "target" with "destination" in M600 (PR#2374) - Also fix a bug in `M600` where `Z_MAX_ENDSTOP_INVERTING` is being used as the index into the `destination[AxisEnum]` array.	пре 10 година
Scott Lahteine	a5033c3652	Enable LCD_PIN_RESET if it exists (PR#2375)	пре 10 година
AnHardt	23c8c5348f	Z-height fix V2b (PR#2351) here the other two occurences of `Z_PROBE_OFFSET_FROM_EXTRUDER` are replaced with `zprobe_zoffset`.	пре 10 година
Todd Swindoll	a111fbbd0a	z-probe offset fix (PR#2361) verified via 1.0.2 tag that compiles by multiple people, credit for the fix goes to paulusjacobus for the initial find and sniffle for the correction so M851 works.	пре 10 година
Scott Lahteine	42465ee444	Cleanup of comments & spacing	пре 10 година
Scott Lahteine	9682ed455e	Fix comment on M83, add comment to prepare_move	пре 10 година
Scott Lahteine	bb44fe17cf	Fix typo in buzzer.h endif (PR#2337)	пре 10 година
AnHardt	36746143a1	Correct output of M48 (PR#2336) n_samples is an uint8_t . Got printouts like: 50 of 2 ...	пре 10 година
Scott Lahteine	f6ca5a8da8	Allow "M110 N123" without a checksum	пре 10 година
Scott Lahteine	aaad65ff5d	Include a comment documenting M110	пре 10 година
Scott Lahteine	862c72b030	Put the mandatory test of gcode_N first	пре 10 година
Scott Lahteine	30976f9773	Allow M110 to handle a second N argument	пре 10 година
Scott Lahteine	d135b15bb8	Init all endstop bits to 0 (PR#2332)	пре 10 година
Scott Lahteine	5ccb1c9e7d	Use millis for M600 audio feedback interval	пре 10 година
Scott Lahteine	fb16a83b8a	Cleanup M600 documentation comments	пре 10 година
Scott Lahteine	97ec224d72	Replace target with destination in M600	пре 10 година
Scott Lahteine	4ce9ddbb74	Check the temperature before filament change	пре 10 година
Jaime van Kessel	b8b5762e55	Update Ultimaker URL	пре 10 година
Jaime van Kessel	d5bfbf5a59	Added correct dutch translation for calibrate.	пре 10 година
Scott Lahteine	149c474e55	Updated Russian language (PR#2325) Gleaned from https://github.com/MarlinFirmware/Marlin/commit/4ac14a7e5f 8976eafd1a	пре 10 година
AnHardt	722829b058	Move buzzing code to buzzr.h & buzzer.cpp (PR#2307) at least the lcd independent part from Marlin_main.cpp.	пре 10 година
AnHardt	c461975140	Rename and repair MELZI_1284 (PR#2301) to MELZI_MAKR3D. Fix for #2288 As the normal MELZI also can have a 1284.	пре 10 година
schlotzz	1e9cf905c7	Enable ZigZag AutoBedLeveling on Deltas (PR#2273) ZigZag has been disabled by fault due to do_topography_map	пре 10 година
Scott Lahteine	ec93383ec8	Add SanityCheck for bed probe position settings (PR#2282)	пре 10 година
Scott Lahteine	dc40a5f6e0	Patch up more outdated config lines	пре 10 година
Scott Lahteine	98c9111a7d	Update delta configs with latest settings	пре 10 година
Scott Lahteine	e6baf8afd9	Fix up allen key settings in delta configs	пре 10 година
Scott Lahteine	3b293fc5d1	Move Delta settings lower in delta files	пре 10 година
Scott Lahteine	df21857583	Move extruder offset settings next to extruders setting	пре 10 година
Scott Lahteine	2dd1859247	Cleanup spaces and comments in configs and conditionals	пре 10 година
Scott Lahteine	a274769f4f	Clean up spacing and comments Also clean up some trailing spaces in a few other sources	пре 10 година
Scott Lahteine	d3bce05d54	Fix up spacing for filament sensor values	пре 10 година
Scott Lahteine	b4b10a57fe	Fix configurator section directives and values lists	пре 10 година
Scott Lahteine	bba14dcbe6	Move Z Safe Homing point to the middle of the movement range	пре 10 година

Први Претходна 1 2 3 4 5 ... Следеће Последњи

2856 Комити (39092efe88d29232825fe6c85086dcaf0935c03e)