marlin

Commit Graph

Author	SHA1	Message	Date
Scott Lahteine	1f7e220387	Make HAL ISR macros function-like	6 years ago
Scott Lahteine	3419099f0a	Clean up whitespace	6 years ago
Michiel Baird	b824a517aa	Add G38.4 and G38.5 (#13348)	6 years ago
MoellerDi	c36989c39e	Fix chamber temperature measurement (#13350)	6 years ago
Scott Lahteine	33a08fc6f7	Fix typos from temperature rework Followup to #12201	6 years ago
Marcio Teixeira	00fc43144a	Follow up fixes to various PRs. (#13334) - Ensure `MarlinUI:get_progress` is defined for `ExtUI`. - Fix for `BACKLASH_SMOOTHING` with small segments. `BACKLASH_SMOOTHING` with extremely small segments failed to fully correct due to the correction factor being rounded down. Rounding up ensures the entire backlash will converge to zero even for small segments. - Add pinout for the beta revision `EINSY_RETRO`. - Update soft endstops with tool offsets (for toolchange et. al. move clamping) (#12568)	6 years ago
Reece Kibble	dbead66988	Allows user to set (almost) any PWM frequency (#12638)	6 years ago
3dlabsio	645ca7af7a	M141 Heated Chamber, Temperature rework (#12201)	6 years ago
Scott Lahteine	44571775bd	Further support for 6 extruders	6 years ago
Scott Lahteine	cfdb38eda4	Allow SERIAL_ECHOPAIR to take up to 12 pairs (#13311)	6 years ago
Scott Lahteine	15738ea506	Update a motion comment	6 years ago
Scott Lahteine	bc87e97357	Prevent a tool change move out of bounds	6 years ago
Scott Lahteine	2212da453a	Distinguish between analog/digital auto fans (#13298)	6 years ago
Chris Pepper	38bef9da91	Report auto temp to both serial ports, if available (#13301)	6 years ago
Robert Mendon	367d392880	Init stepper current after stepper pins are set up (#13302)	6 years ago
Scott Lahteine	599cdc3f0f	Remove dead code from get_pid_output See #12981	6 years ago
Vasily Evseenko	71773b128d	Fix stepper use before init. Add Ultimaker2+ Extended clone config (#13284)	6 years ago
kAdonis	05c2f80826	Fix bug in wait-for-heatup (#13290)	6 years ago
Scott Lahteine	fa236e9718	General cleanup ahead of L64XX	6 years ago
Scott Lahteine	2f1e1dcb42	Gradual step towards EXTRUDERS 0 support	6 years ago
Scott Lahteine	99d0022fae	Drop the Z_MIN_PROBE_ENDSTOP option (#13276)	6 years ago
Scott Lahteine	a2e3226597	Init XYZ to configured home position	6 years ago
InsanityAutomation	e2e2a55d9b	Add thermistor type 67 SliceEng (#13275)	6 years ago
Scott Lahteine	7fde3ed915	Skip hysteresis check when temp is already close to target To eliminate a long delay during pause, park, and filament change	6 years ago
InsanityAutomation	eb4bf93ea4	Add more Babystep options (#13262)	6 years ago
Bob Kuhn	ddbe4cfa20	Printrboard G2 support (#13116)	6 years ago
Giuliano Zaro	2616e4d4d9	Remove duplicated 'chitchat' defines (#13258)	6 years ago
Scott Lahteine	5d28575d4d	Clean up some motion code	6 years ago
Scott Lahteine	808b076000	Update some ABL/UBL conditionals	6 years ago
Scott Lahteine	64253e1a58	Followup to serial reform Reference #13250	6 years ago
Scott Lahteine	e15354e387	Simplify serial port redirect (#13234)	6 years ago
Scott Lahteine	02fec89a0d	Turn fans off in zero_fan_speeds Addressing #13231	6 years ago
Scott Lahteine	3c9a7926c2	Fix compile error with JUNCTION_DEVIATION See #13000	6 years ago
LinFor	ba39186364	TMC_DEBUG optimization and improvements (#13135)	6 years ago
Roman Moravčík	208ab8b366	Fix compilation with one service interval (#13185)	6 years ago
Scott Lahteine	be9a409980	Fix M125 XY parameters, export get_homing_bump_feedrate	6 years ago
Scott Lahteine	ce40c2e87c	Use do_blocking_move_to(ref, fr)	6 years ago
Scott Lahteine	7cf9b93f26	Add HAS_FILAMENT_SENSOR ahead of 12962	6 years ago
revilor	e56c13670d	Service interval watchdog (#13105)	6 years ago
InsanityAutomation	7f1b69b0c8	Add HOST_PROMPT_SUPPORT (#13039)	6 years ago
Scott Lahteine	0feeef2604	Update copyright in headers	6 years ago
Scott Lahteine	894f5c24a8	Fix trailing whitespace	6 years ago
Giuliano Zaro	773fa5c40f	Fix define used when PID is off (#13119) Replaced `PID_MAX` with `BANG_MAX` since it should be the correct define to be used when PID is not enabled.	6 years ago
Simon Jouet	5cd0fa3ce1	Basic GPIO expander using the ESP32 I2S peripheral (#12959)	6 years ago
Scott Lahteine	6de3d34378	M166 Gradients, LCD Menu for 2-channel Mixer (Geeetech A10M/A20M) (#13022)	6 years ago
LinFor	7ee35c2611	PID_MENU option to save PROGMEM in LCD menus (#13095)	6 years ago
AnHardt	0e37fe8776	Apply minimum C in M303 (#13113) Apply minimum `C` in `M303`. `PID_autotune()` needs to be called with a 'C'ycles-parameter >2 to give meaningful (different from 0) PID-factors. Therefore silently raise C to 3. Fixing one aspect of #13104	6 years ago
Marcio Teixeira	e1604198ff	G425 — Auto-calibrate Backlash and Nozzle Offsets (#13050)	6 years ago
InsanityAutomation	413e303ad5	More Advanced Pause options (#12984)	6 years ago
teemuatlut	d81342254a	Support new TMC drivers (#13026)	6 years ago

First Previous ... 3 4 5 6 7 ... Next Last

873 Commits (78d7349fd7df2b0f559c068e20c43d67d3c25072)