marlin

Commit graph

Autor	SHA1	Nachricht	Datum
Scott Lahteine	3bc179a16f	Compress/update comments ubl_motion …to fit more code on the screen and correct outdated commentary contrasting ABL.	vor 7 Jahren
Scott Lahteine	1a75165f35	For set_z_fade_height use set_bed_leveling_enabled	vor 7 Jahren
Scott Lahteine	1cb810ff1c	[2.0.x] Automatically reset stepper timeout (#10179) * Automatically reset stepper timeout in manage_inactivity Any code that adds moves to the planner can skip resetting the stepper timeout. We can let `idle` / `manage_inactivity` reset the timer whenever it detects any moves in the planner. * blocks_queued => has_blocks_queued	vor 7 Jahren
Roxy-3D	c3c264978f	correct truncated comment	vor 7 Jahren
Scott Lahteine	bc45fb6b13	Tweak use of move_z_after_probing	vor 7 Jahren
Scott Lahteine	c352954882	Allow no raise after run_z_probe in probe_pt	vor 7 Jahren
Scott Lahteine	ae39fbd646	Also suppress keepalive with suspend_auto_report	vor 7 Jahren
Scott Lahteine	dd2949922b	Consolidate 3-point leveling point options	vor 7 Jahren
Scott Lahteine	1d22609473	MIN_PROBE_EDGE replaces DELTA_PROBEABLE_RADIUS	vor 7 Jahren
Scott Lahteine	c0d694d5d3	Squash UBL postscript comment	vor 7 Jahren
Scott Lahteine	14c03cb6f4	[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10069) Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.	vor 7 Jahren
Scott Lahteine	28f1276286	[2.0.x] Add Z_AFTER_PROBING option (#10058) Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.	vor 7 Jahren
Scott Lahteine	d0ac0151b6	Fix typo in ubl.prepare_segmented_line_to	vor 7 Jahren
Scott Lahteine	239902f861	Fix E2END and add EEPROM to Smart RAMPS Reference #9983	vor 7 Jahren
Roxy-3D	26dc594ebb	prevent steppers from turning off during manual probes	vor 7 Jahren
Bob-the-Kuhn	d8eadf3796	fix ubl_G29.cpp Travis error	vor 7 Jahren
Roxy-3D	646dd5554c	prevent steppers from turning off during manual probes	vor 7 Jahren
Scott Lahteine	ca577c1638	Fix up various spacing, comments, and typos	vor 7 Jahren
Scott Lahteine	9515e5aefb	Fix LA_active_extruder (static)	vor 7 Jahren
Scott Lahteine	1d604be671	Suspend auto-report during UBL map output	vor 7 Jahren
Scott Lahteine	2057177184	Make enums into implicit char	vor 7 Jahren
Scott Lahteine	24b9c1923f	ubl G29 tweaks	vor 7 Jahren
Scott Lahteine	7bdb98c946	Fix #9826. Solution by @gloomyandy	vor 7 Jahren
Roxy-3D	306f44198e	Prevent serial buffer overrun in Pronterface 75ms might be excessive... But I know people are seeing problems with PronterFace as the client...	vor 7 Jahren
Scott Lahteine	966d9af98a	Mesh export in Bilinear + UBL M503	vor 7 Jahren
Scott Lahteine	2228dff3ea	ubl.h compile flags from 1.1.x	vor 7 Jahren
Scott Lahteine	f3dbe19669	Tweaks to HAL codestyle	vor 7 Jahren
Roxy-3D	d504bbbfa4	Fix botched check for being off the mesh...	vor 7 Jahren
Scott Lahteine	241e55ef3b	Apply SERIAL_FLUSH macro	vor 7 Jahren
Scott Lahteine	304e0f8945	Followup to 21e60fd `ENABLED` only works for flag-type options. Floats must use `#ifdef`.	vor 7 Jahren
Roxy-3D	21e60fd3ed	Allow user to control Z-Height correction for off mesh movements (#9661)	vor 7 Jahren
Scott Lahteine	8d71ad37cb	flush comment to match 1.1.x	vor 7 Jahren
Scott Lahteine	89165326b4	Cleanup after vim and vigor	vor 7 Jahren
Scott Lahteine	8a6feab1c4	Num-to-string functions for DEBUG_LEVELING_FEATURE	vor 7 Jahren
Scott Lahteine	e5ee0b6f6c	Implement MALYAN_LCD	vor 7 Jahren
Scott Lahteine	2bea1bda56	Move more strings to PROGMEM	vor 7 Jahren
Scott Lahteine	1dcfe193ac	Optimize some serial strings	vor 7 Jahren
Roxy-3D	bfd9728cf4	Serial buffer over run work around for v2.0.0 (#9236) * Work around for serial buffer over run PronterFace sends a lot of M105 commands. During long operations such as UBL's G29 P1, G29 P2, G29 P4 and G26 this can over run the serial buffer. This results (very often) in a M1 (actually a M1M105) ending up in the command queue. Until we figure out a better way to resolve this issue, this will keep the UBL commands from experiencing bogus commands at thier completion.	vor 7 Jahren
Roxy-3D	af9b32e3b9	Give PronterFace time to print the UBL What information... Give PronterFace time to print the UBL What information...	vor 7 Jahren
Roxy-3D	f5f1b069ad	Convert UBL mesh tilting to all use the same algorithm (#9204) A number of regressions were patched also. The UBL G29 P2 and P4 Press and Hold had stopped working. It is very possible this is broken in the bugfix_v1.1.x branch also. The main purpose of the Pull Request is to get the 3-Point mesh tilting to use the LSF algorithm just like the grid based mesh tilt. This simplifies the logic and reduces the code size some what. But the real reason to do it is the 3-Point case can be solved exactly. And by feeding these numbers into the LSF algorithm it provides a way to check all that code for 'correctness'.	vor 7 Jahren
Thomas Moore	f7efac57b7	Multi-host support	vor 7 Jahren
Scott Lahteine	60d07f20e7	Make mbl.has_mesh() a method	vor 7 Jahren
Scott Lahteine	86818c9a89	Move MBL functions into the class	vor 7 Jahren
Scott Lahteine	e89f1453ab	UBL G29 works without settings.load()	vor 7 Jahren
Scott Lahteine	4ef965cc40	Fix compiler warnings	vor 7 Jahren
Scott Lahteine	4b49ea1e92	General cleanup of config-store, reset_bed_level	vor 7 Jahren
Scott Lahteine	705ea98fd3	Comment `return false` in motion functions	vor 7 Jahren
Scott Lahteine	caa5093498	General DELTA_IK macro	vor 7 Jahren
Scott Lahteine	d568e586b7	Fix up ubl_motion indentation	vor 7 Jahren
Scott Lahteine	6d0678d963	Omit unused UBL motion code	vor 7 Jahren

Erste Vorherige 1 2 Nächste Letzte

98 Commits (80e29492c6894c52b7695ab325ad792b19005684)