marlin

Commit Graph

Автор	SHA1	Съобщение	Дата
Scott Lahteine	14df753086	Correction for block->mix_steps Fix #11484	преди 6 години
Alexander Amelkin	2ecfda80ac	Improve support for JTAG/SWD pins reuse (#11963) STM32 can reuse JTAG and SWD pins separately. Add `DISABLE_DEBUG` option to disable both interfaces and retain `DISABLE_JTAG` to disable JTAG only.	преди 6 години
Scott Lahteine	bb47009656	Apply sensorless changes to example configs	преди 6 години
Thomas Moore	3286325044	Add TMC2130 sensorless probing	преди 7 години
Scott Lahteine	7d5c336c56	Corrections for dylsexic TMC	преди 6 години
Scott Lahteine	d89d8fe852	Fix Busy State in temperature.cpp Fix #11954	преди 6 години
Giuliano Zaro	70e7a465d8	[2.0.x] Fix compile error (#11951) Fix compile error intruduced with M109 modification	преди 6 години
Hannes Brandstätter-Müller	935b120949	Anycubic Kossel: probe closer to the edge (#11950)	преди 6 години
Scott Lahteine	1410e79e7f	Ensure M109 handles autotemp	преди 6 години
Scott Lahteine	e4389f7d23	Standard methods to wait for heating (#11949)	преди 6 години
Scott Lahteine	bdc9889d3a	Fix a sanity check	преди 6 години
Scott Lahteine	321f9140d1	Followup to #11904	преди 6 години
InsanityAutomation	23114aeb81	Fix garbled M119 output. Honor NUM_RUNOUT_SENSORS (#11948)	преди 6 години
Scott Lahteine	1667ed9d1c	Pause should use ECHOLNPGM	преди 6 години
Victor Tseng	93839e2f73	Add option to enable/disable autoretract altogether (#11904)	преди 6 години
Scott Lahteine	ad21a4f07b	Tweaks to HAL format and order	преди 6 години
Scott Lahteine	b682a1961a	Tweak STM32F7 TMC2660 class	преди 6 години
Scott Lahteine	a0a3b23e35	Reduce Raptor bootscreen by 144 bytes	преди 6 години
InsanityAutomation	95d793456b	Add Formbot Raptor config, fix other Formbot configs (#11926)	преди 6 години
Mitch Roote	d016b572e3	[2.0.x] Add pin configuration for Fysetc F6 (#11932)	преди 6 години
Alexander Amelkin	84926b1d5a	HAL general support for DISABLE_JTAG option (#11211) Some STM32-based boards may use multiplexed JTAG pins as IO. Up to now the `DISABLE_JTAG` option (defined in pins files) was only supported for AT90-based boards. This commit generalizes the code and adds support for boards based on STM32F1 and STM32F4.	преди 6 години
Scott Lahteine	c575c5d5f6	Bring example configs up to date (#11939)	преди 6 години
Scott Lahteine	6b1a4f30a8	Fix case of T-Rex 3 _Statusscreen.h	преди 6 години
Scott Lahteine	ab7bfa86e2	Fix case of T-Rex-3 _Statusscreen.h	преди 6 години
Scott Lahteine	241168926d	Update some configs	преди 6 години
Scott Lahteine	cb6454118c	Workaround for Pronterface M29	преди 6 години
Victor Tseng	eeab4141db	[2.0.x] Anycubic Trigorilla 14 pins tweak (#11869)	преди 6 години
InsanityAutomation	cb9dc56630	Add GT2560 v3 support (#11914)	преди 6 години
InsanityAutomation	f2e630a05e	Stow probe on probing failed (#11936) Prevents probe from being left down should probing fail and print job continue	преди 6 години
Hannes Brandstätter-Müller	0b602ae101	[2.0.x] Fix Anycubic Kossel with Probe V1, stuck LCD message after stow (#11929)	преди 6 години
Giuliano Zaro	dc11131656	[2.0.x] fix possible race condition (#11923) Fix some commits done in #11900	преди 6 години
Scott Lahteine	d6b9327c11	Followup for Endstop Noise Threshold Followup to #11912	преди 6 години
Scott Lahteine	aa6e8e9325	Tweak some config comments	преди 6 години
Scott Lahteine	5490a664f5	Expose: Homing Validation and Endstop Noise Threshold (#11912)	преди 6 години
Scott Lahteine	cee34f7290	Followup for BABYSTEP_HOTEND_Z_OFFSET (#11916)	преди 6 години
teemuatlut	884ad75cb8	Update config files	преди 7 години
Giuliano Zaro	18e456d38d	[2.0.x] fix home endstop bug (DON'T MERGE, needs discussion) (#11900)	преди 6 години
Scott Lahteine	6742026568	Followup for 6 extruders	преди 6 години
Scott Lahteine	04bdff4115	Add a blank line	преди 6 години
Marcio Teixeira	ccbd045f02	Fixed warning about comparing signed to unsigned (#11909)	преди 6 години
InsanityAutomation	1104054d73	2.0 IDEX Independent z offset and other fixes (#11862) * Add Formbot Raptor board Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com> * Add a second Z probe Z offset Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com> * Modify method to utilize live adjustment of hotend z offset Should probably move config option to babystepping and rename as it may now apply to all multiextruder systems * Move config item and catchup other code to current method	преди 6 години
Scott Lahteine	217e0efd20	General option PAUSE_BEFORE_DEPLOY_STOW (#11905)	преди 6 години
Scott Lahteine	849dea92a8	Move probe extras below probe types	преди 6 години
Scott Lahteine	a2b0260f0f	Update Sublime files	преди 6 години
Hannes Brandstätter-Müller	a4cdffdd69	Support for manually deployed fixed probes (#11899)	преди 6 години
Scott Lahteine	ddcbf80f23	Followup for Z_TRIPLE_ENDSTOPS	преди 6 години
Marcio Teixeira	c411e7eb0d	[2.0.x] Squelch compiler warnings seen with -Wall (#11889)	преди 6 години
Roxy-3D	83105590a0	Better default values for Mesh Inset	преди 6 години
Roxy-3D	4163c1a514	Fix end stop and Z-probe reporting logic	преди 6 години
Scott Lahteine	ea9eb2fc8f	Fix servo angles in config-store	преди 6 години

Първа Предишна 1 2 3 4 5 ... Следваща Последна

9213 Ревизии (9903305dda4841520147f2ca77f208e24e36aa88)