marlin

Commit graph

Autor	SHA1	Nachricht	Datum
AnHardt	97ca1b3f4d	Name magic value 20 to MAX_OVERSHOOT_PID_AUTOTUNE to make it better findable.	vor 9 Jahren
Scott Lahteine	f65833931d	Formatting tweaks	vor 9 Jahren
Scott Lahteine	d693e0f378	Use WATCH_TEMP_INCREASE + TEMP_HYSTERESIS + 1 as difference limit	vor 9 Jahren
Scott Lahteine	6697a8f375	Watch the heater a little longer	vor 9 Jahren
Scott Lahteine	5693a6e3c9	Fix heating error message	vor 9 Jahren
Scott Lahteine	8332a15899	Fix testing of runaway options in temperature.cpp	vor 9 Jahren
Scott Lahteine	2445ae3d3a	Combine thermal runaway and watch-period - Make thermal protection for all hotends and/or bed into simple switches - Now enable `WATCH_TEMP_PERIOD` when `THERMAL_PROTECTION_HOTENDS` is enabled - Move detailed thermal parameters to `Configuration_adv.h` - Add sanity checks to warn about old configurations - Change `WATCH_TEMP_PERIOD` to seconds instead of milliseconds	vor 9 Jahren
Scott Lahteine	9b3d4380d3	Only watch the heater that was set	vor 9 Jahren
Scott Lahteine	28c87ec81b	Disable all heaters on temp error	vor 9 Jahren
Scott Lahteine	54deb9eea3	Enable WATCH_TEMP_PERIOD by default	vor 9 Jahren
Scott Lahteine	deedb00c18	Document WATCH_TEMP_PERIOD	vor 9 Jahren
Scott Lahteine	ae53b3cdc3	Fix the M303 S-1 report text	vor 9 Jahren
Scott Lahteine	0fca084ea6	Make EEPROM reproducible in GCode With these changes the output of `M503 S0` is all you need to restore the EEPROM. Building on this it is straightforward to save and restore the EEPROM state using the SD card or external GCode file. - Added `M145` to set “heatup states” for the LCD menu - Added `M420` to toggle Mesh Bed Leveling - Added `M421` to set a single Mesh coordinate - Extended `Config_PrintSettings` with added M codes - Cleaned up some comments here and there	vor 9 Jahren
paclema	581685a231	Added new PID autotune info, to make easy copy & paste results to marlin	vor 9 Jahren
Scott Lahteine	09d60e0128	Naming and code comments	vor 10 Jahren
Scott Lahteine	257a907456	Fix typo in next_bed_check_ms	vor 10 Jahren
Scott Lahteine	e4b1e8651b	next_ vars faster than previous_ - Change some `previous_` time vars to `next_` so an add only happens at intervals - Fix `HEATER_0_USES_MAX6675` polling too frequently, or not at all	vor 10 Jahren
Scott Lahteine	ccddc280be	Apply three more commits	vor 10 Jahren
Scott Lahteine	27cb90da8b	IsStopped / IsRunning inline	vor 10 Jahren
Scott Lahteine	e502144eda	Fixup formatting of last commit	vor 10 Jahren
Richard Miles	1a5293c2ce	Prevents MINTEMP / MAXTEMP when no heaters present This commit checks whether or not HEATER_0 is in use, and if not, skips the MIN / MAX temperature checks.	vor 10 Jahren
Scott Lahteine	b0f198c153	heater_index above its use	vor 10 Jahren
Scott Lahteine	60f8e0386f	More thermal runaway states	vor 10 Jahren
Scott Lahteine	f9dbd73652	Fix tr_target_temperature type - float!	vor 10 Jahren
Natealus	a6ba40ae48	Compiling error temperature.cpp with multiple extruders defined It wouldn't compile because of this line in temperature.cpp it turns out it was just a stray ( that didn't line up with the previous lines so I just made it in line with the rest and it compiled fine.	vor 10 Jahren
Scott Lahteine	fc3c76fc16	Fix #1800	vor 10 Jahren
Scott Lahteine	9ba55baa5b	Track target temperature separately for each heater	vor 10 Jahren
Scott Lahteine	528e32a1d4	Fix timeout in thermal_runaway when temperature is set higher	vor 10 Jahren
Scott Lahteine	b98ebd517e	disable / enable_all_steppers functions	vor 10 Jahren
Scott Lahteine	c756b4cf07	Comment tweak	vor 10 Jahren
Scott Lahteine	e96df67630	Clarify thermal_runaway_protection - Add comments documenting `thermal_runaway_protection` - Add an enum for the thermal runaway states - Add macros for temperature helper functions - Fix a glitch with the z probe sled in homeaxis	vor 10 Jahren
AnHardt	488666832b	Remove the previously introduced ()	vor 10 Jahren
AnHardt	3f2e863206	Improve conditions for HAS_TEMP and use them in temperuture.h Flattened the if structure - the preprocessor is doing the work - not the Arduino. Arduino.	vor 10 Jahren
AnHardt	85f8a26ba4	Fix MIN&MAX temperatures again replaced GE0 with th matching GEX in the second row. added some ()	vor 10 Jahren
Scott Lahteine	571652c49b	Fix LCD click - Make the default LCD click sound more pleasant - Fix warnings about bed temperature runaway	vor 10 Jahren
AnHardt	7b2550a604	Times can't be negative. cardreader.cpp needs temperature.h for autotempShutdown() when AUTOTEMP is defined but warns about unused variables. Unpublished variables by putting them in to temperature.cpp.	vor 10 Jahren
Scott Lahteine	ba871e46bf	Fix compiler warnings - Patched up for most included configurations	vor 10 Jahren
Scott Lahteine	df02b992b0	Fix redundant_temperatrure_raw setting	vor 10 Jahren
Scott Lahteine	ce485175eb	Give all temp arrays 4 indices	vor 10 Jahren
Scott Lahteine	267d6bef15	Eliminate most warnings - Fix a bug reading `code_value` for `M503 Sn` - Hide and remove unused variables	vor 10 Jahren
Scott Lahteine	410f64782a	Always 4 temp sensors	vor 10 Jahren
Scott Lahteine	53169d96e8	Set temp_meas_ready in set_current_temp_raw	vor 10 Jahren
AnHardt	f680e509c4	Enclosed error-messages for TEMP_SENSOR_1_AS_REDUNDANT in PSTR()	vor 10 Jahren
AnHardt	ac81b4084f	Make variables and function static.	vor 10 Jahren
AnHardt	01cc97a3c3	Corected condition for PIDdT	vor 10 Jahren
AnHardt	94330705c7	Move definition of PIDdT back to temperature.h make it unconditional remove all definitions in the 'Configuration.h's remove form 'Conditionals.h'	vor 10 Jahren
AnHardt	dd0067afa6	Fix MAX6675 again and introduce set_current_temp_raw() to make the temperature-code work again with Arduino 1.0.6. Sorry could not make an extra block on base level.	vor 10 Jahren
Scott Lahteine	fc53e43de6	Don't test raw temp for MAX6675 - Remove test of raw temp for thermistor 0 when using MAX6675 - Longer `raw_temp_value` array for `TEMP_SENSOR_1_AS_REDUNDANT`	vor 10 Jahren
Scott Lahteine	1fac388664	Revert measurement loop	vor 10 Jahren
Scott Lahteine	6bdee87be3	Cleanup temperature code - Get rid of unused temp states in the ISR, resulting in more frequent temperature reading with fewer sensors - Shrink code slightly in min/max testing	vor 10 Jahren

Erste Vorherige 1 2 3 4 5 Nächste Letzte

222 Commits (a0f362c735401ebbcd95de3f6f8e3c2f17ecc770)