marlin

提交線圖

作者	SHA1	備註	提交日期
Scott Lahteine	b4af4441c5	Clean up watchdog impl.	9 年之前
Scott Lahteine	8f16563bbd	Use "defined" with LCD_PIN_BL and LCD_PIN_RESET	9 年之前
Scott Lahteine	6fa7e24af3	Use "UNUSED" to squash compiler warnings	9 年之前
Scott Lahteine	d5b7c595ae	Use static locals in utf_mapper.h	9 年之前
Scott Lahteine	9bdab4f3a8	Clean up "else" and other spacing	9 年之前
Scott Lahteine	9b23490f01	Clean up spacing in configs	9 年之前
esenapaj	c6c37abd41	Update language_kana.h	9 年之前
esenapaj	c24045475a	Update language_kana_utf8.h	9 年之前
Richard Wackerbarth	25d636c9e0	Compiler issues (PR#2696)	9 年之前
AnHardt	47401ec97b	MSG_EXTRUDER_SWITCHED_OFF was renamed to MSG_REDUNDANCY in language.h, but was not renamed here. If TEMP_SENSOR_1 is enabled as redundant then an error is thrown that MSG_EXTRUDER_SWITCHED_OFF is not defined. Originaly by @12dstring	9 年之前
Scott Lahteine	ba6a243197	DEBUG message has no parameter (PR#2671)	9 年之前
Scott Lahteine	0c7f7ebcfb	Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting	9 年之前
Rafa Couto	b5fb7075b9	Galician (gl) language.	9 年之前
Richard Wackerbarth	7b4bdc0203	DUAL_X_CARRIAGE motor enabling As noted by @darkjavi et.al. in #103, the E1 motor was not being enabled in planner.cpp when using DUAL_X_CARRIAGE. This patch enables and disables E1 as it should.	9 年之前
Richard Wackerbarth	91b5156b3e	Marlin 1.1.0 Release Candidate 2 - 29 September 2015	9 年之前
Richard Wackerbarth	03f0edb57e	Fix high LCD status screen update frequency (PR#2655)	9 年之前
KiteLab	0ad25c6665	Hint for changed behaviour of SDSUPPORT	9 年之前
Richard Wackerbarth	56a6d85c41	Add (disabled) style test	9 年之前
Richard Wackerbarth	4cdafc0b35	Add astyle specification	9 年之前
Richard Wackerbarth	e01f5e1ef7	Cleanup	9 年之前
Mike Cochrane	5e36b64635	SDEXTRASLOW for some SD card readers (PR#176) Add SDEXTRASLOW which runs the SD card at SPI_QUARTER_SPEED. Quarter speed is needed for RIGIDBOT_PANEL	9 年之前
Scott Lahteine	5d65a36dee	Give lcd_sd_status an UNKNOWN state (PR#180)	9 年之前
fmalpartida	0f149ea0c6	LCD home button causes repeated homing (PR#175) Fix: increased debounce delay.	9 年之前
Scott Lahteine	b825567e0f	Drop www. from marlinfirmware.org (PR#175)	9 年之前
Richard Wackerbarth	42e381f8e2	Merge Extrusion_rate_heater_compensation	9 年之前
Scott Lahteine	db27e67580	Apply PID_ADD_EXTRUSION_RATE to extras	9 年之前
Scott Lahteine	bc50db9cf6	Implement PID_ADD_EXTRUSION_RATE	9 年之前
Richard Wackerbarth	b5987de08a	Merge Menu Updates	9 年之前
Scott Lahteine	cffb2d457e	Cleanup file formatting	9 年之前
Scott Lahteine	7ac7ddbf20	Show nozzles, heaters, and extruders numbered 1-4	9 年之前
Scott Lahteine	5bc480fee8	Fix Move E menu items	9 年之前
Scott Lahteine	fc882c34a3	Init lcd_sd_status as false to force lcd_update test Replaces #145 which is way out of date	9 年之前
Scott Lahteine	e27dd5c22d	Conditionalize functions that rely on SDSUPPORT	9 年之前
Scott Lahteine	fabf3ae4a0	Add final Z raise after Delta probe	9 年之前
Petr Zahradnik	8c768a76a2	Create language_cz.h Czech language translation.	9 年之前
Petr Zahradnik	5b9010965d	Update language.h Added comment for Czech language (associated with file language_cz.h).	9 年之前
Scott Lahteine	89fb778684	Fix up probe pin define and test	9 年之前
Scott Lahteine	558665cd90	Constrain Tune > Nozzle/Flow menu items	9 年之前
Scott Lahteine	9f462f0cf5	Hack to address stuttering caused by ISR not finishing in time (PR #138) When the ISR does not finish in time, the timer will wrap in the computation of the next interrupt time. This hack replaces the correct (past) time with a time not far in the future.	9 年之前
Richard Wackerbarth	a356699882	Merge manual feedrates for deltas from PR#128	9 年之前
Scott Lahteine	8b3d63c423	Unify Delta XYZ homing rates As noted in #130 allen key probe stow rate is based on homing rates, but homing rates were left out of most delta configs. This unifies the XYZ homing rates and applies the unified rates to allen key movements.	9 年之前
Scott Lahteine	7c72b57313	Unify manual feedrate and Fix LCD MANUAL_FEEDRATE (PR#128) As noted by @o-lampe at https://github.com/MarlinFirmware/MarlinDev/issues/114#issuecomment-136757614 the `MANUAL_FEEDRATE` for Delta Z should be the same as XY.	9 年之前
Scott Lahteine	f690b82343	Remove extra MAX_FREQ_TIME define (PR#148)	9 年之前
fmalpartida	868dbbac6a	Updated README to rearrange logo to avoid being crossed out by title. Added my name following naming convention.	9 年之前
Richard Wackerbarth	8e4fa08a20	Merge Dual Y&Z towers (PR#108 & PR#147)	9 年之前
Scott Lahteine	a4c78ae786	Add E1 pins to SENSITIVE_PINS for Dual Y or Dual Z	9 年之前
Scott Lahteine	a39fadf876	Update kossel-pro example config (again?)	9 年之前
Scott Lahteine	34e0a8d848	Move Y2 and Z2 pins defines to pins.h	9 年之前
Scott Lahteine	28599c51c7	Wrap Dual Y options in a conditional	9 年之前
Scott Lahteine	11a065c0ca	Remove Z2 pins overrides from Configuration_adv.h	9 年之前