marlin

Commit grafiek

Auteur	SHA1	Bericht	Datum
Scott Lahteine	bae8f82ba8	[2.0] Fix Mixing Extruder mixing factors (#11861)	6 jaren geleden
Scott Lahteine	f5c210d33d	Config changes supporting up to 6 extruders	6 jaren geleden
Scott Lahteine	6286afd456	Add Triple-Z options to example configs	6 jaren geleden
Kevin	e25d2ae4a2	[2.0.x] SWITCHING_TOOLHEAD (#11623)	6 jaren geleden
Scott Lahteine	2a61c9a939	Various fixups to configs, spacing, etc.	6 jaren geleden
Scott Lahteine	9953213513	Add EDITABLE_SERVO_ANGLES to example configs	6 jaren geleden
Scott Lahteine	66966dbd69	Tweak comments for newer multiplexer	6 jaren geleden
Kevin	6483285bc5	HOTEND_OFFSET_Z always available (#11603)	6 jaren geleden
Scott Lahteine	bd6d032628	Update default driver configuration Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>	6 jaren geleden
Scott Lahteine	846bd24eb9	MALYAN_LCD is ok without SD	6 jaren geleden
Scott Lahteine	72b086b90d	Add A5984 to example configurations	6 jaren geleden
Giuliano	bd3ec66a78	[2.0.x] typo fix (#11365) Typo fix	6 jaren geleden
Scott Lahteine	e5c0b490c8	Add *_DRIVER_TYPE to example configs Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>	6 jaren geleden
Scott Lahteine	14e2b11195	Fix spelling in configs	6 jaren geleden
Scott Lahteine	39c8aed8ba	Add MANUAL_PROBE_START_Z to example configs	6 jaren geleden
Scott Lahteine	12854f1909	Add Z_CLEARANCE_MULTI_PROBE to example configs Co-Authored-By: nightgryphon <ngryph@gmail.com>	7 jaren geleden
Chris Pepper	cbea385ed7	[2.0.x] Fix LCD_LANGUAGE options list formatting in config (#11198) * Fix LCD_LANGUAGE options list formatting in config * Remove 'cn' language option from list	7 jaren geleden
Scott Lahteine	568cfe7caa	Add thermistor 501 (100K Zonestar)	7 jaren geleden
etagle	6f14bcaa3e	Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping The timing value should be properly set for ALL boards. The compiler will check and set maximum step rate calculations based on those values.	7 jaren geleden
Scott Lahteine	f74278b8b1	Add -4 thermocouple to list in configs	7 jaren geleden
Scott Lahteine	aaaf09bda2	BEZIER_JERK_CONTROL => S_CURVE_ACCELERATION	7 jaren geleden
Scott Lahteine	4b2f6e3b2b	[2.0.x] Add endstop noise filter (#10796)	7 jaren geleden
Scott Lahteine	b7dfc79988	Disable SERIAL_PORT_2 by default and sanity-check it (#10748)	7 jaren geleden
Scott Lahteine	e978e6e782	[2.0.x] Arrange LCD options by type (#10630)	7 jaren geleden
Scott Lahteine	840ff60952	Bring some configs up to date	7 jaren geleden
nightdemonx	e911635fb1	Add thermocouple with AD8495 support	7 jaren geleden
Scott Lahteine	b7e938a9fb	LCD_BED_LEVELING enables a sub-menu for ABL	7 jaren geleden
Scott Lahteine	c87b0e21be	Add units to probe speed comments	7 jaren geleden
Scott Lahteine	05c33833e7	[2.0.x] Add NO_LCD_MENUS option (#10582)	7 jaren geleden
Scott Lahteine	ed8d2bc225	Clean up some endstop inverting examples	7 jaren geleden
Scott Lahteine	9e07df5c1b	Extra options for LEVEL_BED_CORNERS (#10483)	7 jaren geleden
Scott Lahteine	a90cbc6339	[2.0.x] Wait for bed heaters between probing (#10472)	7 jaren geleden
KangDroid	6c535081ec	[2.0.x] Add optional menu item to toggle software endstops (#10389)	7 jaren geleden
Yunhui Fu	c96412a78f	[2.0.x] UTF-8 language translation support (#10213)	7 jaren geleden
Scott Lahteine	82dafbba33	Add Z_PROBE_LOW_POINT to example configs	7 jaren geleden
Scott Lahteine	dca69efc11	Update Bed PID comments	7 jaren geleden
Scott Lahteine	5932df7ea1	Add BEZIER_JERK_CONTROL to example configs	7 jaren geleden
Scott Lahteine	5b3bda1c16	Add Chamber Temp options to example configs	7 jaren geleden
Scott Lahteine	adcb87f0db	Z Endstop Servo => Z Probe Servo	7 jaren geleden
Scott Lahteine	dd2949922b	Consolidate 3-point leveling point options	7 jaren geleden
Scott Lahteine	c6ff39cc14	Spacing cleanup	7 jaren geleden
Scott Lahteine	14c03cb6f4	[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10069) Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.	7 jaren geleden
Scott Lahteine	28f1276286	[2.0.x] Add Z_AFTER_PROBING option (#10058) Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.	7 jaren geleden
Scott Lahteine	79e6d890d5	Add UNKNOWN_Z_NO_RAISE to example configs	7 jaren geleden
Scott Lahteine	a2a672449a	Updated boot screen description	7 jaren geleden
Scott Lahteine	4953fb1c88	Standardize encoder defaults	7 jaren geleden
Scott Lahteine	5684beae90	Bring some configs up to speed	7 jaren geleden
Scott Lahteine	2024775e07	Spanish (UTF8) Language (#9786) From #7314 by @MrAmericanMike	7 jaren geleden
Scott Lahteine	17d984eab3	Add RESTORE_LEVELING_AFTER_G28 to example configs	7 jaren geleden
Scott Lahteine	7d8c6b3f3c	Add 20x4 option for Sainsmart LCD (#9740)	7 jaren geleden

Eerste Vorige 1 2 Volgende Laatste

83 Commits (bae8f82ba80be8dd90f52156652d46be0b0a2a08)