marlin

提交图

作者	SHA1	备注	提交日期
ErikZalm	bb499421e9	Merge pull request #166 from zittix/Marlin_v1 Fixes #153 for bad call to abs()	13 年前
zittix	fbd91ab0b5	Fixes #153 for bad call to abs()	13 年前
Bernhard Kubicek	451f9cc6d1	Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer.	13 年前
Bernhard Kubicek	108011085b	futher docu of M500	13 年前
Erik van der Zalm	1874cb71a6	Added option to increase the FAN PWM frequency.	13 年前
Erik van der Zalm	6a5a34e0ff	Small cleanup	13 年前
Erik van der Zalm	e3821bd86f	Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1	13 年前
Erik van der Zalm	02af69911e	Added temperature window to M109. This is needed for systems with no overshoot PID.	13 年前
ErikZalm	e203b8c754	Merge pull request #154 from daid/Marlin_v1 Added 2nd extruder temperature LCD readout and setting.	13 年前
ErikZalm	362ddc4efc	Merge pull request #155 from Atntias/patch-1 adding M120 and 121 for turning on and off the endstops only for homing	13 年前
ErikZalm	58cad83253	Merge pull request #156 from Atntias/patch-2 Fix to allow M120/M121	13 年前
sefi	c27081aa4a	Fix to allow M120/M121	13 年前
sefi	e11e072eca	adding M120 and 121 for turning on and off the endstops only for homing function	13 年前
Daid	8e68c6cf89	Show proper temperature for extruder 2	13 年前
Daid	8503b78876	Added support for 2nd extruder temperature to UltraLCD	13 年前
Bernhard Kubicek	8446c9dc92	Merge pull request #152 from loganb/Marlin_v1 Fix compile error on boards without a bed heater. I could not find why this problem was introduced. Its quite obvious, so I think its in general interest to merge.	13 年前
Logan Bowers	3eacb4c16d	Wrap the call to turn off the bed heater in a #if to prevent a compile error on boards that do not have a bed heater	13 年前
Bernhard	e4d2138dbd	reinitialize the lcd, if the SD card is inserted or removed. It seems that LCDs can confused by electrical discharges from time to time. Since a removal or insert of the sd card takes a long time in firmware, just reinitializing the lcd does not hurt. actually, it solves a problem with the UltiControlle	13 年前
Bernhard	464b755918	added support for the UltiController	13 年前
Bernhard	44fd8d46d2	fixed quickhome	13 年前
Bernhard	33bb044d7c	fixed catsting to (int)e in serial error messages. see https://github.com/ErikZalm/Marlin/issues/148	13 年前
Erik van der Zalm	ffea8008ca	Update readme file	13 年前
ErikZalm	c2557abc03	Merge pull request #138 from triffid/fix-makefile make should rebuild if configuration or Makefile is changed	13 年前
Erik van der Zalm	67cf105bc6	Fixed AUTOTEMP (M109 S215 B260 F1 starts autotemp) Changed SLOWDOWN. IF this does not work ok OLD_SLOWDOWN is the old algo.	13 年前
Erik van der Zalm	8aee9d51b6	Disabled disable_heater in PID_autotune.	13 年前
ErikZalm	939f1fab46	Merge pull request #140 from daid/Marlin_v1 Fix for wrong systax in #ifdef.	13 年前
Daid	414408b2d0	Fix for wrong systax in #ifdef.	13 年前
Michael Moon	77d503fa13	Fix Makefile	13 年前
Erik van der Zalm	cf7c8c458f	Fixed MAX6675	13 年前
ErikZalm	325f0651ac	Merge pull request #136 from grrf/patch-1 This breaks temperature readout for pronterface!	13 年前
grrf	03b0850e63	This breaks temperature readout for pronterface!	13 年前
ErikZalm	2a019a53d2	Merge pull request #134 from tgiphil/Marlin_v1 - Fixed a typo	13 年前
tgiphil	ad8bc71d3e	- Fixed a typo	13 年前
Erik van der Zalm	46feae79c6	Fixed typo in arc	13 年前
Erik van der Zalm	4ca2f336f0	Changed default MINIMUM_PLANNER_SPEED -> 0.05 Fixed small bug in arcs M105 prints now actual_temp/target_temp	13 年前
Erik van der Zalm	ae0bf8068b	Fixed arc offset.	13 年前
Erik van der Zalm	0c1b863755	Ignore ":" in comments.	13 年前
Erik van der Zalm	63aec3c56e	Replaced Kill by Stop. If the printer is stopped. Fix the error and use M999 to restart. Moved the PID_dT in the Ki and Kd calculation from the configuration.h to temperature.cpp	13 年前
ErikZalm	8b785f75a6	Merge pull request #123 from buserror-uk/for-upstream For upstream	13 年前
ErikZalm	5b8758f42b	Merge pull request #126 from tommycheng/patch-1 Fix compilation error when PIDTEMP is undefined and ULTIPANEL is defined...	13 年前
Tommy Cheng	520f1a54a8	Fix compilation error when PIDTEMP is undefined and ULTIPANEL is defined.	13 年前
Michel Pollet	5550e893d5	New board variant, Open Motion Controller Open Hardware board currently used by the group build of http://tvrrug.org.uk The board can be found at http://solderpad.com/folknology/open-motion-controller/ Signed-off-by: Michel Pollet <buserror@gmail.com>	13 年前
Michel Pollet	aa6e6e914e	Makefile: Redone + Removed most explicit pathnames, use the standard make "VPATH" to let make find the files for itself. + Added a "hardware variant" variable that allows compiging Sanguino and Gen7 as well as "generic" arduino. + Allows overriding the MOTHERBOARD define from the Makefile + Removed the 'preprocessor' bit that wasn't needed, now just "include" the files that are needed, since it allows gcc to show the right file/line when displaying error/warnings. + Uses gcc's own dependency generator to generate the .d files, and and include these instead of self-patching the makefile Signed-off-by: Michel Pollet <buserror@gmail.com>	13 年前
Bernhard	0183e6332a	made prepare->autostart independent of current folder.	13 年前
Bernhard	1532200435	found error in filenames. One array was too short. This had nothing to do with long filenames, other than if they were 12 characters exactly, which could only happen if the extension and the text before were filled completely	13 年前
ErikZalm	7f775c142c	Update README.md	13 年前
Erik van der Zalm	b985e4a134	Fixed compile errors in ultralcd when no ultra_lcd is selected.	13 年前
Erik van der Zalm	2e749d60c3	Added DISABLE_MAX_ENDSTOPS	13 年前
Erik van der Zalm	33f5697888	PPID tune exports more constants.	13 年前
Erik van der Zalm	b44055cc51	Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1	13 年前