Marcio Teixeira
c1e17037e5
Various fixes for MarlinUI and ExtUI (#12439 )
6 anos atrás
Giuliano Zaro
d3605cfc26
Don't start watching heaters when target is 0 (#12453 )
6 anos atrás
Ludy
93e958f695
Fix compile error with ZONESTAR_LCD+NO_LCD_MENUS (#12466 )
6 anos atrás
Ludy
22d7fed60a
Fix compile error with SD_FIRMWARE_UPDATE (#12462 )
6 anos atrás
Nils Hasenbanck
779b2709ec
Change temperature pin order for RemRam V1 (#12458 )
Beta testers suggested to adopt the RAMPS order of temperature probe connectors. This commit fixes the order to the RAMPS order.
6 anos atrás
Scott Lahteine
8ebb4dc294
Followup to static CardReader
6 anos atrás
Scott Lahteine
7ee5894360
Allow float XY probe offsets
Responding to #12383
XY probe offsets should be integers because adding decimal points makes the code larger. But if decimals are very much wanted, this commit removes the old restriction.
6 anos atrás
Giuliano Zaro
43ecdb606f
Fix a compile warning (#12452 )
6 anos atrás
Ph0non
984c4ba8c7
Enable SD Card on RepRap Display and RADDS (#12446 )
* Enable SD Card on RepRap Display and RADDS
Define the necessary pins in `pins_RADDS.h` (copied from the `RADDS_DISPLAY` section) for the use of the SD card slot on RRD.
6 anos atrás
Ludy
56a94c2a26
Use 'target_extruder' in M104 as with M109 (#12448 )
6 anos atrás
Scott Lahteine
66580f32c2
Make CardReader class static (#12451 )
* Make CardReader a static class
* Make CardReader flags into bitfields
6 anos atrás
Scott Lahteine
3e9ffaddb6
Consolidate, optimize some LCD menu code (#12450 )
6 anos atrás
Scott Lahteine
d97e31db4c
Optimize Power-Loss Recovery (#12440 )
6 anos atrás
Mateusz Krawczuk
ca21ac6b9b
Support two MAX6675 thermocouples (#8686 )
6 anos atrás
Scott Lahteine
0e610815e4
No need for Cap:PAREN_COMMENTS
6 anos atrás
Scott Lahteine
7a075a5dc9
Tweak extruder errors
6 anos atrás
Scott Lahteine
2d92f333f5
Fix GcodeSuite::T active_extruder reference
6 anos atrás
Scott Lahteine
d2bb53702a
Optimize target_extruder, ignore T with mixing (#12432 )
* Optimize target_extruder, ignore T with mixing
* Give G-code Tn parity with tool_change
6 anos atrás
Marcio Teixeira
5e586a6b39
Fix to runout sensor code. (#12431 )
- "old_state" is no longer a class static variable.
6 anos atrás
Scott Lahteine
d82c350de7
Miscellaneous LCD code renaming, reordering (#12430 )
* Move special characters to language.h
* Apply some naming standards
* Clean up menu item draw functions
* Rename some Temperature methods
* UI => ExtUI
6 anos atrás
Scott Lahteine
edfd106bc5
Rejigger Filament Runout class (#12428 )
6 anos atrás
Scott Lahteine
f4c128ecaa
Move RRW keypad code to a common method (#12429 )
6 anos atrás
Scott Lahteine
54ec5528a0
hasstatus => has_status
6 anos atrás
Scott Lahteine
ebf585b673
Fix an old sanity check
6 anos atrás
Ryan
052d102ded
UltiMachine Archim 1 support (#12404 )
6 anos atrás
Scott Lahteine
664e20754d
Clean up pins files
6 anos atrás
Scott Lahteine
1eb5249598
Fix Formbot Trex-2+ configs
Followup to #12422
6 anos atrás
thiagodesacosta
075a22ed65
Update Portuguese-Brazilian translation (#12402 )
6 anos atrás
Marcio Teixeira
3ceab8474c
Add required "cardreader.h" include (#12419 )
6 anos atrás
Giuliano Zaro
98c2fc4e42
Endstops fix followup (#12423 )
Followup to #12413
6 anos atrás
Roxy-3D
f19fd642ce
Updates to Formbot T-Rex 2+ configuration files (#12422 )
Updates to Formbot T-Rex 2+ configuration files
6 anos atrás
Roxy-3D
cda5ef08fa
Debug of G2-G3 for UBL (#12386 )
Changes only affect UBL. Everything else is left alone.
6 anos atrás
AnHardt
9ad3aed0ef
Fix tool-change for MIXING_EXTRUDER with < 2 virtual tools (#12417 )
Fix #12416
Better handling of `ENABLED(MIXING_EXTRUDER) && !MIXING_VIRTUAL_TOOLS > 1` - to not fall through to the general case. Fix compiler warnings for `#elif EXTRUDERS < 2`.
6 anos atrás
Giuliano Zaro
d631267548
Refine endstops fixes (#12413 )
When endstops/probe are enabled `ENDSTOP_NOISE_THRESHOLD` calls to `update` are required to properly re-sync endstops/probe status.
6 anos atrás
Scott Lahteine
0ee1a92971
Group status methods, share reset_status with Extensible UI (#12414 )
* Group status methods, share reset_status with Extensible UI
* Move common DOGM code to headers
6 anos atrás
Scott Lahteine
690c4e8457
Clean TLM trailing whitespace
6 anos atrás
Scott Lahteine
143b2896e0
Add M412 to enable/disable filament runout detection (#12406 )
6 anos atrás
Scott Lahteine
a163c89c6a
Followup to 50af1d1
6 anos atrás
Scott Lahteine
fea2363a2e
Clear old _site contents on regeneration
6 anos atrás
AnHardt
be6271767f
Fix BABYSTEP_ZPROBE_OFFSET (#12408 )
Fix #12399
Did not compile without `WATCH_HOTENDS || WATCH_THE_BED`.
Add condition to include "../../module/temperature.h".
6 anos atrás
Scott Lahteine
50af1d1e08
Differentiate translated On/Off from Serial ON/OFF
6 anos atrás
Scott Lahteine
df907a905f
Update UBL comments for debug change
6 anos atrás
Scott Lahteine
da17f8ad37
For now (!) don't synchronize in M204 and M205
See if this has any deleterious effect on motion planning by slicers that inser their own jerk and acceleration controls. The problem I see is that these settings can take effect on blocks already in the planner, and the only way around this would be to shadow these settings in planner blocks and use the shadowed settings in the planner.
6 anos atrás
Scott Lahteine
a3923424c7
Clean up LCD width/height determination
6 anos atrás
Scott Lahteine
a0c795b097
Encapsulate common display code in a singleton (#12395 )
* Encapsulate common LCD code in a singleton
* Depend more UBL code on UBL_DEVEL_DEBUGGING
- Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
6 anos atrás
Scott Lahteine
9da6809ac3
Adjust some comment spacing
6 anos atrás
Scott Lahteine
471f403a67
Reduce code size with plain inlines
6 anos atrás
Scott Lahteine
30a49f5ee2
Apply extra condition to LCD_PROGRESS_BAR
6 anos atrás
Scott Lahteine
4e0c935959
Update HAL and libs formatting
6 anos atrás
Scott Lahteine
47483e8c17
Update Raptor config
6 anos atrás