Scott Lahteine
f054f566b4
Merge pull request #7918 from thinkyhead/bf1_neopixel_full
[1.1.x] Different NEOPIXEL types
7 år sedan
Slawomir Ciunczyk
167058b61f
Different NEOPIXEL types
Changes to support NEOPIXEL LED strips
- Support for different NEOPIXEL as defined in Adafruit_NeoPixel.h
- ability to setup startup brightness
- ability to define sequential/non-sequential transition of color change during heating-up
- additional parameter to M150 P<brightness>
7 år sedan
Scott Lahteine
f835245ee1
Merge pull request #7908 from thinkyhead/bf1_goodbye_legacy_advance
[1.1.x] Remove legacy ADVANCE feature
7 år sedan
Scott Lahteine
98c7bde514
Merge pull request #7917 from thinkyhead/bf1_lcd_segmented_moves
[1.1.x] Segmented manual moves for kinematics
7 år sedan
Scott Lahteine
38110e220d
Segmented manual moves for kinematics
7 år sedan
Scott Lahteine
75e4867d22
Merge pull request #7915 from thinkyhead/bf1_probeless_ubl
[1.1.x] Allow UBL G29 and G26 to build without a probe
7 år sedan
deram
9239fcf0da
Allow UBL G29 and G26 to build without a probe
7 år sedan
Scott Lahteine
73c5675485
Merge pull request #7867 from thinkyhead/bf1_add_some_lcds
[1.1.x] Add support for 4 new LCDs
7 år sedan
Scott Lahteine
381ebc043f
Add support for ST7565-64128N
Based on #7447 by @Bob-the-Kuhn
7 år sedan
jmdearras
c7e0a49c94
Add some new LCD displays
- Original CR-10
- MKS Mini Display
7 år sedan
Scott Lahteine
067622fcc6
Apply some tweaks based on 2.0.x
7 år sedan
Scott Lahteine
ae256576e1
Bring configs into parity with 2.0.x
7 år sedan
Scott Lahteine
cbfcce09fa
Remove legacy ADVANCE feature
7 år sedan
Scott Lahteine
a21201a713
LCD filename already concatentated
7 år sedan
Scott Lahteine
53f2f188f2
LCD filename already concatenated
7 år sedan
Scott Lahteine
a6e95c7d25
Fix display issue with SD_ALPHA_SORT caching
7 år sedan
Dave Johnson
97e6663bb3
[1.1.x] Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled (#7878 )
* Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled
If HOME_AFTER_DEACTIVATE, there is no need to warn on LCD since printer will home prior to starting print. Saves 60 bytes PROGMEM.
add HD44780 too
* Reduce lines used
* Reduce lines used
7 år sedan
Scott Lahteine
e2ceb1b800
Merge pull request #7632 from GMagician/Wrong-sanitycheck-message-fix
Addressing #7612
7 år sedan
Scott Lahteine
8c93295d62
Merge pull request #7873 from thinkyhead/bf1_anet_encoder_pulses
[1.1.x] Fixing ANET encoder pulses
7 år sedan
Phr3d13
c26242a553
Fixing #7833
7 år sedan
Scott Lahteine
b825bc87ae
Merge pull request #7871 from thinkyhead/bf1_fix_sd_listing_bug
[1.1.x] Fix sd file list display bug
7 år sedan
Scott Lahteine
dac5f20a01
Patch SD file draw bug
7 år sedan
Scott Lahteine
b211fa4e1f
Remove extra NEWPANEL settings in Conditionals_LCD.h
7 år sedan
Scott Lahteine
a4954a68e0
Merge pull request #7865 from thinkyhead/bf1_finally_G33_is_done
[1.1.x] G33 completely fixed and done
7 år sedan
LVD-AC
355cba4aa7
Fixes for G33
7 år sedan
Scott Lahteine
2f0164b995
Merge pull request #7864 from thinkyhead/bf1_mapper_c2c3c4_sk
Tweak spacing in utf8_mapper.h
7 år sedan
Scott Lahteine
e287e14354
Tweak spacing in utf8_mapper.h
7 år sedan
Scott Lahteine
5e63ba970d
Merge pull request #7862 from thinkyhead/bf1_mapper_c2c3c4_sk
[1.1.x] Added Slovak C2C3C4 mapper implementation.
7 år sedan
Roman Moravčík
2a46ab288e
Added Slovak C2C3C4 mapper implementation.
7 år sedan
Scott Lahteine
7999249a5c
Set TEMP_SENSOR_0 to 1 in CR-10 example config
As pointed out in #7692 by @totalitarian
7 år sedan
Scott Lahteine
0ec9a7f090
Fix xon_xoff_state initialization
7 år sedan
Scott Lahteine
a47c5c093d
Merge pull request #7459 from ejtagle/xon-xoff-sdxfer
[1.1.x] XON/XOFF serial handshake (for faster transfers to SD)
7 år sedan
Scott Lahteine
5a674a8e10
Merge pull request #7828 from thinkyhead/bf1_dualx_movex
[1.1.x] Fix DUAL_X_CARRIAGE manual move
7 år sedan
Scott Lahteine
bcb8722513
Fix DUAL_X_CARRIAGE manual move
Addressing #7745
7 år sedan
Scott Lahteine
4c34b3ad9c
Stop redundant E4_IS_TMC2130 current control
7 år sedan
Scott Lahteine
1b8b5c4b06
Make prepare_move_to_destination_dualx a full move function
7 år sedan
Eduardo José Tagle
451c1fb5f9
Merge pull request #1 from thinkyhead/bf1_xon_xoff_for_sd
XON/XOFF changes
7 år sedan
Scott Lahteine
4e19ff75b6
XON/XOFF corrections, tweaks, formatting, etc.
7 år sedan
Scott Lahteine
94caabf89a
Add XON/XOFF options to example configs
7 år sedan
Scott Lahteine
f365448338
Merge pull request #7811 from thinkyhead/bf1_fix_resume_print
[1.1.x] Fix broken M600 resume_print
7 år sedan
Scott Lahteine
3d1536a1b2
Merge pull request #7814 from thinkyhead/bf1_inhibit_option
[1.1.x] Option to disallow motion before homing
7 år sedan
GMagician
8ab426c3a4
Updated all examples configurations
Forgot to update examples configurations. Done now
7 år sedan
GMagician
33d28c24bf
Implementing [FR] #7548
Added new configuration to inhibit XYZ movements when home is not done
7 år sedan
Scott Lahteine
ac70048945
Only MarlinConfig.h ahead of feature block
7 år sedan
MasterPIC
40a4a716e1
Fix filament change bug in resume_print
Expected behaviour: while (auto)extruding the new filament, the nozzle should not move. It should move (from filament replacement position to printing position) only after the user has confirmed the successful filament replacement and extrusion.
Actual behaviour: while (auto)extruding the new filament, the nozzle moves from filament replacement position back to printing position.
So the extrusion step is mixed with the movement required to go back to the printing position.
The provided code seems to be working but probably a better fix is required.
7 år sedan
Scott Lahteine
802f147686
Remove some excess whitepsace
7 år sedan
Scott Lahteine
80a0f935a1
Fix G10-G11 by adding a synchronize
Based on #7792 by @tcm0116
7 år sedan
Scott Lahteine
de3c9bade6
Merge pull request #7773 from thinkyhead/bf1_lcd_leveling_status
[1.1.x] Show leveling status on character LCD
7 år sedan
MasterPIC
7f8ff0a724
Show leveling status on character LCD
7 år sedan
Scott Lahteine
3a8923be74
Merge pull request #7772 from thinkyhead/bf1_user_menu_return
[1.1.x] User menu return-to-status option
7 år sedan