marlin

Commit-Graf

Upphovsman	SHA1	Meddelande	Datum
Scott Lahteine	f5c210d33d	Config changes supporting up to 6 extruders	6 år sedan
Scott Lahteine	6286afd456	Add Triple-Z options to example configs	6 år sedan
Kevin	e25d2ae4a2	[2.0.x] SWITCHING_TOOLHEAD (#11623)	6 år sedan
Scott Lahteine	2a61c9a939	Various fixups to configs, spacing, etc.	6 år sedan
Scott Lahteine	509e1cf2bd	Add *_DRIVER_TYPE to remaining configs	6 år sedan
Scott Lahteine	9953213513	Add EDITABLE_SERVO_ANGLES to example configs	6 år sedan
Scott Lahteine	66966dbd69	Tweak comments for newer multiplexer	6 år sedan
Kevin	6483285bc5	HOTEND_OFFSET_Z always available (#11603)	6 år sedan
Scott Lahteine	846bd24eb9	MALYAN_LCD is ok without SD	6 år sedan
Giuliano	bd3ec66a78	[2.0.x] typo fix (#11365) Typo fix	6 år sedan
Scott Lahteine	14e2b11195	Fix spelling in configs	6 år sedan
Scott Lahteine	39c8aed8ba	Add MANUAL_PROBE_START_Z to example configs	6 år sedan
Scott Lahteine	12854f1909	Add Z_CLEARANCE_MULTI_PROBE to example configs Co-Authored-By: nightgryphon <ngryph@gmail.com>	7 år sedan
Chris Pepper	cbea385ed7	[2.0.x] Fix LCD_LANGUAGE options list formatting in config (#11198) * Fix LCD_LANGUAGE options list formatting in config * Remove 'cn' language option from list	7 år sedan
Scott Lahteine	c7ec6c68e7	Patch SCARA config to match 1.1.x	7 år sedan
Scott Lahteine	568cfe7caa	Add thermistor 501 (100K Zonestar)	7 år sedan
etagle	6f14bcaa3e	Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping The timing value should be properly set for ALL boards. The compiler will check and set maximum step rate calculations based on those values.	7 år sedan
Scott Lahteine	f74278b8b1	Add -4 thermocouple to list in configs	7 år sedan
Scott Lahteine	aaaf09bda2	BEZIER_JERK_CONTROL => S_CURVE_ACCELERATION	7 år sedan
Scott Lahteine	4b2f6e3b2b	[2.0.x] Add endstop noise filter (#10796)	7 år sedan
Scott Lahteine	b7dfc79988	Disable SERIAL_PORT_2 by default and sanity-check it (#10748)	7 år sedan
Scott Lahteine	e978e6e782	[2.0.x] Arrange LCD options by type (#10630)	7 år sedan
nightdemonx	e911635fb1	Add thermocouple with AD8495 support	7 år sedan
Scott Lahteine	b7e938a9fb	LCD_BED_LEVELING enables a sub-menu for ABL	7 år sedan
Scott Lahteine	c87b0e21be	Add units to probe speed comments	7 år sedan
Scott Lahteine	05c33833e7	[2.0.x] Add NO_LCD_MENUS option (#10582)	7 år sedan
Scott Lahteine	ed8d2bc225	Clean up some endstop inverting examples	7 år sedan
Scott Lahteine	9e07df5c1b	Extra options for LEVEL_BED_CORNERS (#10483)	7 år sedan
Scott Lahteine	a90cbc6339	[2.0.x] Wait for bed heaters between probing (#10472)	7 år sedan
KangDroid	6c535081ec	[2.0.x] Add optional menu item to toggle software endstops (#10389)	7 år sedan
Yunhui Fu	c96412a78f	[2.0.x] UTF-8 language translation support (#10213)	7 år sedan
Scott Lahteine	82dafbba33	Add Z_PROBE_LOW_POINT to example configs	7 år sedan
Scott Lahteine	dca69efc11	Update Bed PID comments	7 år sedan
Scott Lahteine	5932df7ea1	Add BEZIER_JERK_CONTROL to example configs	7 år sedan
Scott Lahteine	5b3bda1c16	Add Chamber Temp options to example configs	7 år sedan
Scott Lahteine	e8e60263c8	Scale feedrate (mm/s to deg/s) for SCARA	7 år sedan
Scott Lahteine	adcb87f0db	Z Endstop Servo => Z Probe Servo	7 år sedan
Scott Lahteine	dd2949922b	Consolidate 3-point leveling point options	7 år sedan
Scott Lahteine	c6ff39cc14	Spacing cleanup	7 år sedan
Scott Lahteine	14c03cb6f4	[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10069) Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.	7 år sedan
Scott Lahteine	28f1276286	[2.0.x] Add Z_AFTER_PROBING option (#10058) Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.	7 år sedan
Scott Lahteine	79e6d890d5	Add UNKNOWN_Z_NO_RAISE to example configs	7 år sedan
Scott Lahteine	a2a672449a	Updated boot screen description	7 år sedan
Scott Lahteine	91db7930dc	Drop SCARA_FEEDRATE_SCALING The updated planner takes the length of the move, so this pre-calculation is no longer needed.	7 år sedan
Scott Lahteine	4953fb1c88	Standardize encoder defaults	7 år sedan
Scott Lahteine	5684beae90	Bring some configs up to speed	7 år sedan
Scott Lahteine	2024775e07	Spanish (UTF8) Language (#9786) From #7314 by @MrAmericanMike	7 år sedan
Scott Lahteine	17d984eab3	Add RESTORE_LEVELING_AFTER_G28 to example configs	7 år sedan
Scott Lahteine	7d8c6b3f3c	Add 20x4 option for Sainsmart LCD (#9740)	7 år sedan
Scott Lahteine	8733d5a296	Add NUM_RUNOUT_SENSORS to example configs	7 år sedan

Första Föregående 1 2 3 Nästa Sista

109 Incheckningar (f5c210d33dba860dd51f4cf45bfbffdebf53e34f)