Roman Moravčík
2a46ab288e
Added Slovak C2C3C4 mapper implementation.
преди 7 години
Scott Lahteine
0ec9a7f090
Fix xon_xoff_state initialization
преди 7 години
Scott Lahteine
a47c5c093d
Merge pull request #7459 from ejtagle/xon-xoff-sdxfer
[1.1.x] XON/XOFF serial handshake (for faster transfers to SD)
преди 7 години
Scott Lahteine
5a674a8e10
Merge pull request #7828 from thinkyhead/bf1_dualx_movex
[1.1.x] Fix DUAL_X_CARRIAGE manual move
преди 7 години
Scott Lahteine
bcb8722513
Fix DUAL_X_CARRIAGE manual move
Addressing #7745
преди 7 години
Scott Lahteine
4c34b3ad9c
Stop redundant E4_IS_TMC2130 current control
преди 7 години
Scott Lahteine
1b8b5c4b06
Make prepare_move_to_destination_dualx a full move function
преди 7 години
Eduardo José Tagle
451c1fb5f9
Merge pull request #1 from thinkyhead/bf1_xon_xoff_for_sd
XON/XOFF changes
преди 7 години
Scott Lahteine
4e19ff75b6
XON/XOFF corrections, tweaks, formatting, etc.
преди 7 години
Scott Lahteine
94caabf89a
Add XON/XOFF options to example configs
преди 7 години
Scott Lahteine
f365448338
Merge pull request #7811 from thinkyhead/bf1_fix_resume_print
[1.1.x] Fix broken M600 resume_print
преди 7 години
Scott Lahteine
3d1536a1b2
Merge pull request #7814 from thinkyhead/bf1_inhibit_option
[1.1.x] Option to disallow motion before homing
преди 7 години
GMagician
8ab426c3a4
Updated all examples configurations
Forgot to update examples configurations. Done now
преди 7 години
GMagician
33d28c24bf
Implementing [FR] #7548
Added new configuration to inhibit XYZ movements when home is not done
преди 7 години
Scott Lahteine
ac70048945
Only MarlinConfig.h ahead of feature block
преди 7 години
MasterPIC
40a4a716e1
Fix filament change bug in resume_print
Expected behaviour: while (auto)extruding the new filament, the nozzle should not move. It should move (from filament replacement position to printing position) only after the user has confirmed the successful filament replacement and extrusion.
Actual behaviour: while (auto)extruding the new filament, the nozzle moves from filament replacement position back to printing position.
So the extrusion step is mixed with the movement required to go back to the printing position.
The provided code seems to be working but probably a better fix is required.
преди 7 години
Scott Lahteine
802f147686
Remove some excess whitepsace
преди 7 години
Scott Lahteine
80a0f935a1
Fix G10-G11 by adding a synchronize
Based on #7792 by @tcm0116
преди 7 години
Scott Lahteine
de3c9bade6
Merge pull request #7773 from thinkyhead/bf1_lcd_leveling_status
[1.1.x] Show leveling status on character LCD
преди 7 години
MasterPIC
7f8ff0a724
Show leveling status on character LCD
преди 7 години
Scott Lahteine
3a8923be74
Merge pull request #7772 from thinkyhead/bf1_user_menu_return
[1.1.x] User menu return-to-status option
преди 7 години
Scott Lahteine
723a34d9c7
Add confirmation to Init EEPROM command
преди 7 години
Scott Lahteine
2efd5b119d
Add USER_SCRIPT_RETURN option
преди 7 години
Scott Lahteine
b105e47cb5
Move SERVO0 pin on GT2560 A+ with BLTOUCH enabled
Based on #7769
преди 7 години
Scott Lahteine
0c2cefed8f
Merge pull request #7766 from thinkyhead/bf1_melzi_fixes
Melzi fixes
преди 7 години
DecoyPlatypus
41dcbe89dd
Fixed ST7920_DELAY typo
Fixed typo where ST7920_DELAY_2 was being #defined after a check for #ifndef ST7920_DELAY_3
преди 7 години
DecoyPlatypus
70a64355f6
Fixed LCD_FOR_MELZI SanityCheck
Sanity Check for LCD_FOR_MELZI would fail with "Please select no more than one LCD controller option" any time #define LCD_FOR_MELZI was enabled in Configuration.h, even if there were no other LCD options enabled.
преди 7 години
Scott Lahteine
aefd2a5c4b
Merge pull request #7762 from thinkyhead/bf1_g3d_and_babystep
[1.1.x] Fix G3D_PANEL encoder steps, babystep label
преди 7 години
Scott Lahteine
e37a1ded0d
Increase BABYSTEP_MULTIPLICATOR to 100
Ideally, it should be calculated based on Z steps per unit so that each
babystep corresponds to around 0.025mm. Smaller than this is largely
insignificant for typical layer heights.
преди 7 години
Scott Lahteine
3e28243076
No need for LCD_PINS_Dn when unused
преди 7 години
Scott Lahteine
bbb94b8f68
babystepping tweak
преди 7 години
Scott Lahteine
a277b43e30
Fix babystep menu display
преди 7 години
Scott Lahteine
8a994fb1b1
Fix encoder pulses for G3D_PANEL
преди 7 години
Scott Lahteine
9ee92f1246
Fix ADVANCED_PAUSE_FEATURE in .travis.yml
преди 7 години
Scott Lahteine
ac2ac99e15
Fix bad logic in autostart
As pointed out by @marcio-ao in #7638
преди 7 години
Scott Lahteine
72e9534d11
Merge pull request #7725 from thinkyhead/bf1_creality_fun
More featureful CR-10 configurations
преди 7 години
Scott Lahteine
c1cc79176c
Full-featured Creality configs
преди 7 години
Scott Lahteine
f25dccd6d1
Disable BABYSTEP_XY by default in all configs
преди 7 години
Scott Lahteine
cd09a83cfa
Add size note to SDSORT_LIMIT
преди 7 години
Scott Lahteine
9bbc2df217
General code cleanup, spacing
преди 7 години
Luc Van Daele
74d430cb97
matrix names update (#7697 )
* matrix names update
* symplified names
* new angle normalization
* ABC
* axis
* least squares
* recalc_delta_settings
* endstop_adj
* 0p
* bug
преди 7 години
Scott Lahteine
ca13f4c3dd
Merge pull request #7720 from thinkyhead/bf1_caselight_fix
Fix caselight compile issues
преди 7 години
Scott Lahteine
9d4d53e2fd
Update links to old wiki page
преди 7 години
Scott Lahteine
00896f1713
Fix LEVEL_BED_CORNERS (No leveling required)
преди 7 години
Scott Lahteine
c3a9e95a5f
Define drawmenu items once, in ultralcd.cpp
преди 7 години
Scott Lahteine
0afd25a010
Fix caselight compile issues
преди 7 години
Scott Lahteine
386b74f8c2
Merge pull request #7593 from marcio-ao/bugfix-1.1.x
Added option for graphical overlay for Z-offset (Resubmission of #7350 and #7586 )
преди 7 години
Tannoo
2a963fb5d1
UBL LCD Bugfixes (#7598 )
преди 7 години
Marcio Teixeira
d69c5317df
Added option for graphical overlay for Z-offset
преди 7 години
Scott Lahteine
367e1b54ba
Merge pull request #7591 from thinkyhead/bf1_misc_patches
M111: no args reports current flags
преди 7 години