deram
9239fcf0da
Allow UBL G29 and G26 to build without a probe
пре 8 година
Scott Lahteine
381ebc043f
Add support for ST7565-64128N
Based on #7447 by @Bob-the-Kuhn
пре 7 година
jmdearras
c7e0a49c94
Add some new LCD displays
- Original CR-10
- MKS Mini Display
пре 8 година
Scott Lahteine
067622fcc6
Apply some tweaks based on 2.0.x
пре 7 година
Scott Lahteine
ae256576e1
Bring configs into parity with 2.0.x
пре 7 година
Scott Lahteine
cbfcce09fa
Remove legacy ADVANCE feature
пре 7 година
Scott Lahteine
a21201a713
LCD filename already concatentated
пре 7 година
Scott Lahteine
53f2f188f2
LCD filename already concatenated
пре 7 година
Scott Lahteine
a6e95c7d25
Fix display issue with SD_ALPHA_SORT caching
пре 7 година
Dave Johnson
97e6663bb3
[1.1.x] Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled (#7878 )
* Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled
If HOME_AFTER_DEACTIVATE, there is no need to warn on LCD since printer will home prior to starting print. Saves 60 bytes PROGMEM.
add HD44780 too
* Reduce lines used
* Reduce lines used
пре 7 година
Phr3d13
c26242a553
Fixing #7833
пре 7 година
Scott Lahteine
dac5f20a01
Patch SD file draw bug
пре 7 година
Scott Lahteine
b211fa4e1f
Remove extra NEWPANEL settings in Conditionals_LCD.h
пре 7 година
LVD-AC
355cba4aa7
Fixes for G33
пре 7 година
Scott Lahteine
e287e14354
Tweak spacing in utf8_mapper.h
пре 7 година
Roman Moravčík
2a46ab288e
Added Slovak C2C3C4 mapper implementation.
пре 8 година
Scott Lahteine
7999249a5c
Set TEMP_SENSOR_0 to 1 in CR-10 example config
As pointed out in #7692 by @totalitarian
пре 7 година
Scott Lahteine
0ec9a7f090
Fix xon_xoff_state initialization
пре 8 година
Scott Lahteine
bcb8722513
Fix DUAL_X_CARRIAGE manual move
Addressing #7745
пре 8 година
Scott Lahteine
4c34b3ad9c
Stop redundant E4_IS_TMC2130 current control
пре 8 година
Scott Lahteine
1b8b5c4b06
Make prepare_move_to_destination_dualx a full move function
пре 8 година
Scott Lahteine
4e19ff75b6
XON/XOFF corrections, tweaks, formatting, etc.
пре 8 година
Scott Lahteine
94caabf89a
Add XON/XOFF options to example configs
пре 8 година
GMagician
8ab426c3a4
Updated all examples configurations
Forgot to update examples configurations. Done now
пре 8 година
GMagician
33d28c24bf
Implementing [FR] #7548
Added new configuration to inhibit XYZ movements when home is not done
пре 8 година
Scott Lahteine
ac70048945
Only MarlinConfig.h ahead of feature block
пре 8 година
MasterPIC
40a4a716e1
Fix filament change bug in resume_print
Expected behaviour: while (auto)extruding the new filament, the nozzle should not move. It should move (from filament replacement position to printing position) only after the user has confirmed the successful filament replacement and extrusion.
Actual behaviour: while (auto)extruding the new filament, the nozzle moves from filament replacement position back to printing position.
So the extrusion step is mixed with the movement required to go back to the printing position.
The provided code seems to be working but probably a better fix is required.
пре 8 година
Scott Lahteine
802f147686
Remove some excess whitepsace
пре 8 година
Scott Lahteine
80a0f935a1
Fix G10-G11 by adding a synchronize
Based on #7792 by @tcm0116
пре 8 година
MasterPIC
7f8ff0a724
Show leveling status on character LCD
пре 8 година
Scott Lahteine
723a34d9c7
Add confirmation to Init EEPROM command
пре 8 година
Scott Lahteine
2efd5b119d
Add USER_SCRIPT_RETURN option
пре 8 година
Scott Lahteine
b105e47cb5
Move SERVO0 pin on GT2560 A+ with BLTOUCH enabled
Based on #7769
пре 8 година
DecoyPlatypus
41dcbe89dd
Fixed ST7920_DELAY typo
Fixed typo where ST7920_DELAY_2 was being #defined after a check for #ifndef ST7920_DELAY_3
пре 8 година
DecoyPlatypus
70a64355f6
Fixed LCD_FOR_MELZI SanityCheck
Sanity Check for LCD_FOR_MELZI would fail with "Please select no more than one LCD controller option" any time #define LCD_FOR_MELZI was enabled in Configuration.h, even if there were no other LCD options enabled.
пре 8 година
Scott Lahteine
e37a1ded0d
Increase BABYSTEP_MULTIPLICATOR to 100
Ideally, it should be calculated based on Z steps per unit so that each
babystep corresponds to around 0.025mm. Smaller than this is largely
insignificant for typical layer heights.
пре 8 година
Scott Lahteine
3e28243076
No need for LCD_PINS_Dn when unused
пре 8 година
Scott Lahteine
bbb94b8f68
babystepping tweak
пре 8 година
Scott Lahteine
a277b43e30
Fix babystep menu display
пре 8 година
Scott Lahteine
8a994fb1b1
Fix encoder pulses for G3D_PANEL
пре 8 година
Scott Lahteine
ac2ac99e15
Fix bad logic in autostart
As pointed out by @marcio-ao in #7638
пре 8 година
Scott Lahteine
c1cc79176c
Full-featured Creality configs
пре 8 година
Scott Lahteine
f25dccd6d1
Disable BABYSTEP_XY by default in all configs
пре 8 година
Scott Lahteine
cd09a83cfa
Add size note to SDSORT_LIMIT
пре 8 година
Scott Lahteine
9bbc2df217
General code cleanup, spacing
пре 8 година
Luc Van Daele
74d430cb97
matrix names update (#7697 )
* matrix names update
* symplified names
* new angle normalization
* ABC
* axis
* least squares
* recalc_delta_settings
* endstop_adj
* 0p
* bug
пре 8 година
Scott Lahteine
9d4d53e2fd
Update links to old wiki page
пре 8 година
Scott Lahteine
00896f1713
Fix LEVEL_BED_CORNERS (No leveling required)
пре 8 година
Scott Lahteine
c3a9e95a5f
Define drawmenu items once, in ultralcd.cpp
пре 8 година
Scott Lahteine
0afd25a010
Fix caselight compile issues
пре 8 година