marlin

Commit Graph

Аутор	SHA1	Порука	Датум
InsanityAutomation	f4d1f13358	Warn on cold extrusion, dont error	пре 6 година
Bob Kuhn	2f35747f29	L6470 SPI daisy chain support (#12895)	пре 6 година
Ludy	dc65d96aca	Fix TMC compile error (#12965)	пре 6 година
Scott Lahteine	0495fcd475	Minor spacing fix	пре 6 година
teemuatlut	8a3f1d6932	Fix chopper timing struct and initialization (#12943)	пре 6 година
Ludy	acf266fe78	Fix a compile warning, etc. (#12955)	пре 6 година
Scott Lahteine	712e23c383	Fix up some whitespace	пре 6 година
teemuatlut	e6805582a6	M569 to change stepping mode. Add new TMC section to LCD. (#12884)	пре 6 година
mikeshub	7fde8d9d1e	Add CreatorPro / Makerbot / QIDI / etc and Mightboard RevE support (#12855) - Fix a bug in MAXxxxx thermocouple temp reporting. - Add support for 3-wire HD44780. - Add support for PCA9533 RGB driver. - Add configuration examples for FlashForge CreatorPro.	пре 6 година
InsanityAutomation	082f6a27de	ADAPTIVE_FAN_SLOWING extension to hotend thermal protection (#12853)	пре 6 година
Scott Lahteine	459f4fef60	Fix Temperature::init bug with HEATER_4_PIN	пре 6 година
Scott Lahteine	19fea772e5	Use E_AXIS_N where it makes sense	пре 6 година
HackingGulliver	1fd8e2c649	Fix: Junction Deviation calculates wrong cos(theta) on CoreXY (#12879)	пре 6 година
Marcio Teixeira	6a8fb0f25f	Simplify backlash compensation code. (#12813) - Use `TEST(dm,axis)` to determine directions instead of doing comparisons. - Remove recomputation of `millimeters` and `delta_mm` since backlash compensation should not affect the distance over which material is extruded.	пре 6 година
Marcio Teixeira	81e753064a	Fix ExtUI compile warnings and error (#12799)	пре 6 година
TheLongAndOnly	cb643d87df	Adding missing code for triple Z-stepper auto-align (#12786)	пре 6 година
Marcio Teixeira	60cb36bef3	Misc. improvements (#12747) * Make ExtUI respect MAXTEMP limits - Temperatures are now clamped by MAXTEMP limits rather than arbitrary values. * Speed up USB init, add status - Speed up USB initialization - Show status message if init failed * Enable status messages for EXTENSIBLE_UI * Adjust max limit to MAX_TEMP - 15 * Misc. tweaks to formatting, const, etc.	пре 6 година
Scott Lahteine	371d9a1acf	Fix line-endings, formatting, whitespace Followup to #12770	пре 6 година
Ludy	135c74017c	Fix compile DEBUG_EEPROM_READWRITE error (#12746)	пре 6 година
Ludy	3877bf9704	Fix compile error with delta and sensorless homing (#12740)	пре 6 година
Ludy	cfc5e96b4b	Move JD to Config.h (and fix jerk->eeprom bug) (#12720)	пре 6 година
Roman Moravčík	594898aea7	Limit hotend / bed temperature to maxtemp-15 (#12713)	пре 6 година
InsanityAutomation	367a9f65aa	Add Formbot 350c Thermistor (#12661)	пре 6 година
Scott Lahteine	9d59a9c840	Followup to #12691 (typo)	пре 6 година
Roman Moravčík	98cf546771	Limit set hotend temperature to maxtemp. (#12690)	пре 6 година
Roman Moravčík	4dad489a50	[2.0.x] Limit PID autotune target to maxtemp-15 (#12691)	пре 6 година
Marcio Teixeira	8dcc28c9ae	Squelch warning mentioned in #11061 (#12676)	пре 6 година
Luc Van Daele	c6e09c2689	[2.0.x] G33 clean up (#12648) Remove obsolete workarounds in G33 for the now fixed zprobe_zoffset bug	пре 6 година
teemuatlut	55144284c2	TMC connection test, spreadCycle parameters, improved debugging (#12616)	пре 6 година
Scott Lahteine	6cf8d40f41	Fix some serial echos of pin states	пре 6 година
Scott Lahteine	e8bda62d2a	Followup to servo angles patch Fix #12594	пре 6 година
Marcio Teixeira	b22716e938	M425 Backlash Correction (#11061)	пре 6 година
teemuatlut	50b2fbd031	Trinamic: Split stealthChop, improve driver monitoring, etc. (#12582)	пре 6 година
Scott Lahteine	e874f9664c	Tweaks to endstops code	пре 6 година
Scott Lahteine	3c58b16c9f	Move stepper enable/disable to stepper_indirection.h (#12562)	пре 6 година
Scott Lahteine	aaf862aef2	Fix angles for disabled EDITABLE_SERVO_ANGLES (#12559)	пре 6 година
Scott Lahteine	c986239837	A single SERIAL_ECHO macro type (#12557)	пре 6 година
Jacob Jordan	8be91677df	Fix Skew factors (#12555) - Ensure Skew factors are calculated from test square measurements	пре 6 година
Scott Lahteine	03ef2d6c82	Fix "paused" message and M125 called by M25 (#12551)	пре 6 година
Scott Lahteine	95d154a91f	Fans loop macro	пре 6 година
Scott Lahteine	09d6db491a	Fix wait_for_bed compile error	пре 6 година
Scott Lahteine	29c53f2402	Hide some compile warnings	пре 6 година
Scott Lahteine	caca3c8503	Use wait_for_bed with WAIT_FOR_BED_HEATER Addressing #12517	пре 6 година
Sinisa Culic	8a0992d921	Fast PWM for controller fan (#12485)	пре 6 година
Marcio Teixeira	4bcb63b705	Fix for #12482 (#12483) Fix Z-move to uninitialized position in SWITCHING_EXTRUDERS tool_change (no_move=true)	пре 6 година
Ludy	90a58488b5	Corrected unused var, default switch, Travis tests (#12477)	пре 6 година
Ludy	1f93d2bcf7	Fix LCD compile error, etc. (#12472)	пре 6 година
Marcio Teixeira	c1e17037e5	Various fixes for MarlinUI and ExtUI (#12439)	пре 6 година
Giuliano Zaro	d3605cfc26	Don't start watching heaters when target is 0 (#12453)	пре 6 година
Ludy	22d7fed60a	Fix compile error with SD_FIRMWARE_UPDATE (#12462)	пре 6 година

Први Претходна ... 4 5 6 7 8 ... Следеће Последњи

838 Комити (388babbcea0bae7fc5653c01a4f220fd03a6b02b)