marlin

Revīziju grafs

Autors	SHA1	Ziņojums	Datums
Richard Wackerbarth	e293ea57f0	Unbalanced brackets in setPwmFrequency This is a back port of the correct in issue #248	9 gadus atpakaļ
AnHardt	c956b52c4a	Babystep Multiplier Analog to https://github.com/MarlinFirmware/MarlinDev/pull/250 by @RicardoGA Restore the Babystep Multiplicator functionality and now it's available for X/Y/Z	9 gadus atpakaļ
Richard Wackerbarth	956418c674	Kc is also a multi-PID parameter	9 gadus atpakaļ
Richard Wackerbarth	8cea79a81d	Update reference to our wiki	9 gadus atpakaļ
AnHardt	33addc52a1	Suppress Z_MIN_PROBE_REPEATABILITY_TEST for DELTA and SCARA configurations (PR#2747) For now Z_MIN_PROBE_REPEATABILITY_TEST is not possible for DELTA or SCARA configurations. This PR comments the feature out, where it is commented in by default.	10 gadus atpakaļ
AnHardt	8da2e98985	Split RAMPS 1.3 an 1.4 (PR#2741) because of hardware differences on the SERVO0_PIN	10 gadus atpakaļ
AnHardt	6dfc7124a1	Add Travis check for ALLEN_KEY (PR#2748) Tests DELTA, AUTO_BED_LEVELING_FEATURE and ALLEN_KEY	10 gadus atpakaļ
AnHardt	be7167ed97	Change XY formatting on LCD (PR#2740) According to #123 negative values for XY at or below -100 are displaying incorrectly, dropping the first digit. Deltas can easily have XY values in this range. This PR adds a function to display floats/ints formatted like `_123`, `-123`, `_-12`, or `__-1` as appropriate and applies it to the XY coordinates on Hitachi displays. It also moves the Z value to the right to be consistent with the XY formatting.	9 gadus atpakaļ
vogtmann	9acdc6c234	Update LICENSE	10 gadus atpakaļ
Luis Correia	e7099ea597	Fix Portuguese (Portugal) strings (PR#2700) Align strings with release	10 gadus atpakaļ
Richard Wackerbarth	a0f6407d6a	Merge corrections from dev branch (PR#2704)	9 gadus atpakaļ
Scott Lahteine	754b13d8fe	Patch issue #2315	10 gadus atpakaļ
Scott Lahteine	dbd4c17096	Init Kp, Ki, Kd to 0	10 gadus atpakaļ
Scott Lahteine	644c376e84	Use binary OR with endstop bits	10 gadus atpakaļ
Scott Lahteine	54a39d8c1a	Use a ternary in qr_solve.cpp	10 gadus atpakaļ
Scott Lahteine	17c23bbaf3	Shorten gcode_M221 yet function the same	10 gadus atpakaļ
Scott Lahteine	c0e791dbe9	Only look for "N" line number as first parameter	10 gadus atpakaļ
Scott Lahteine	b4af4441c5	Clean up watchdog impl.	10 gadus atpakaļ
Scott Lahteine	8f16563bbd	Use "defined" with LCD_PIN_BL and LCD_PIN_RESET	10 gadus atpakaļ
Scott Lahteine	6fa7e24af3	Use "UNUSED" to squash compiler warnings	10 gadus atpakaļ
Scott Lahteine	d5b7c595ae	Use static locals in utf_mapper.h	10 gadus atpakaļ
Scott Lahteine	9bdab4f3a8	Clean up "else" and other spacing	10 gadus atpakaļ
Scott Lahteine	9b23490f01	Clean up spacing in configs	10 gadus atpakaļ
esenapaj	c6c37abd41	Update language_kana.h	10 gadus atpakaļ
esenapaj	c24045475a	Update language_kana_utf8.h	10 gadus atpakaļ
Richard Wackerbarth	25d636c9e0	Compiler issues (PR#2696)	10 gadus atpakaļ
AnHardt	47401ec97b	MSG_EXTRUDER_SWITCHED_OFF was renamed to MSG_REDUNDANCY in language.h, but was not renamed here. If TEMP_SENSOR_1 is enabled as redundant then an error is thrown that MSG_EXTRUDER_SWITCHED_OFF is not defined. Originaly by @12dstring	10 gadus atpakaļ
Scott Lahteine	ba6a243197	DEBUG message has no parameter (PR#2671)	10 gadus atpakaļ
Scott Lahteine	0c7f7ebcfb	Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting	10 gadus atpakaļ
Rafa Couto	b5fb7075b9	Galician (gl) language.	10 gadus atpakaļ
Richard Wackerbarth	7b4bdc0203	DUAL_X_CARRIAGE motor enabling As noted by @darkjavi et.al. in #103, the E1 motor was not being enabled in planner.cpp when using DUAL_X_CARRIAGE. This patch enables and disables E1 as it should.	10 gadus atpakaļ
Richard Wackerbarth	91b5156b3e	Marlin 1.1.0 Release Candidate 2 - 29 September 2015	10 gadus atpakaļ
Richard Wackerbarth	03f0edb57e	Fix high LCD status screen update frequency (PR#2655)	10 gadus atpakaļ
KiteLab	0ad25c6665	Hint for changed behaviour of SDSUPPORT	10 gadus atpakaļ
Richard Wackerbarth	56a6d85c41	Add (disabled) style test	10 gadus atpakaļ
Richard Wackerbarth	4cdafc0b35	Add astyle specification	10 gadus atpakaļ
Richard Wackerbarth	e01f5e1ef7	Cleanup	10 gadus atpakaļ
Mike Cochrane	5e36b64635	SDEXTRASLOW for some SD card readers (PR#176) Add SDEXTRASLOW which runs the SD card at SPI_QUARTER_SPEED. Quarter speed is needed for RIGIDBOT_PANEL	10 gadus atpakaļ
Scott Lahteine	5d65a36dee	Give lcd_sd_status an UNKNOWN state (PR#180)	10 gadus atpakaļ
fmalpartida	0f149ea0c6	LCD home button causes repeated homing (PR#175) Fix: increased debounce delay.	10 gadus atpakaļ
Scott Lahteine	b825567e0f	Drop www. from marlinfirmware.org (PR#175)	10 gadus atpakaļ
Richard Wackerbarth	42e381f8e2	Merge Extrusion_rate_heater_compensation	10 gadus atpakaļ
Scott Lahteine	db27e67580	Apply PID_ADD_EXTRUSION_RATE to extras	10 gadus atpakaļ
Scott Lahteine	bc50db9cf6	Implement PID_ADD_EXTRUSION_RATE	10 gadus atpakaļ
Richard Wackerbarth	b5987de08a	Merge Menu Updates	10 gadus atpakaļ
Scott Lahteine	cffb2d457e	Cleanup file formatting	10 gadus atpakaļ
Scott Lahteine	7ac7ddbf20	Show nozzles, heaters, and extruders numbered 1-4	10 gadus atpakaļ
Scott Lahteine	5bc480fee8	Fix Move E menu items	10 gadus atpakaļ
Scott Lahteine	fc882c34a3	Init lcd_sd_status as false to force lcd_update test Replaces #145 which is way out of date	10 gadus atpakaļ
Scott Lahteine	e27dd5c22d	Conditionalize functions that rely on SDSUPPORT	10 gadus atpakaļ